AudioAccess-PX700-mac-sm维修电路原理图.pdf
《AudioAccess-PX700-mac-sm维修电路原理图.pdf》由会员分享,可在线阅读,更多相关《AudioAccess-PX700-mac-sm维修电路原理图.pdf(77页珍藏版)》请在收音机爱好者资料库上搜索。
1、 AUDIOACCESS PX-700 MULTI-ROOM AUDIO CONTROLLER PRELIMINARY SERVICE MANUAL Harman Consumer Group 250 Crossways Park Dr. Woodbury, New York 11797 RadioFans.CN 收音机爱 好者资料库 FEATURES AUDIOACCESS PX-700 MULTI-ROOM AUDIO CONTROLLER The Audioaccess PX-700 is a six zone, multi-room, multi-source audio contro
2、ller that is easily set up with the PX-700 Installation Manager, Audioaccess proprietary Windows application. The award winning PX-700 continues Audioaccess long tradition of easy to use and easy to install multi-room systems, and adds powerful source control, programming flexibility and customizabl
3、e features. An all-new audio preamplifier circuit, designed and manufactured by Madrigal Audio Laboratories, delivers the performance associated with high quality, separate audio components. Together with our elegant, intuitive wall-mounted keypads, touchscreens and handheld remotes, the PX-700 allo
4、ws direct access and control of eight different audio sources in six separate zones. Each zone can control any five separate sources via the KPS Keypad. All eight sources are accessible from our touchscreen and dedicated remote controls. Alternatively, any source may be dedicated or partitioned for
5、use in a specific zone in the home. Up to six PX-700s can be connected to form a 36 zone system. The PX-700 is programmed exclusively with the PX-700 Installation Manager, our proprietary Windows application. A special feature of the software permits adjacent areas, or zones, to be linked together s
6、o that they track the same source while independent volume control is maintained in each area. With the PX-700 Installation Manager, the installer creates and maintains a comprehensive IR library, which is then used to control all of the source components in an installation. The IR commands only nee
7、d to be learned once for use in all projects. The PX-700 Installation Manager also allows the installer to define any number of short and long button presses, which can be assigned to the keypads, touchscreens and handheld remotes. Because of the open architecture of the program, multiple high capac
8、ity CD Changers or DSS receivers can easily be used in a single installation. IR programming, source assignments, turn-on source defaults, input level matching, group assignments and other programming options may be configured prior to the installation or at the job site. Once completed, the project
9、 is downloaded to the PX-700 via an RS-232 input on the rear panel, or a convenient PC Link jack on the front panel of the controller. The Installation Manager uses standard control features found in all Windows applications: right mouse clicks, drag and drop, and pop up menus. Diagnostic tools are
10、included to monitor keypad bus communications. Other tools include an Equipment List, Wiring Instructions, Virtual Installation, and a complete on-line Help file. Features Simple, intuitive operation Easy installation Separate component quality audio performance Adjustable input levels for each sour
11、ce Independent bass and treble levels for each PX-700 room Convenient, expanded programming via PC or laptop Create and maintain extensive IR library Import/export utilities for merging/updating master library Rack mountable chassis Eight audio inputs plus a paging input for each zone Front panel IR
12、 receiver, rear panel IR In/Out jacks Built in RS-232 interface accessible from either front or rear panel Built-in IR learning device Zone linking capabilities Any 5 of 8 sources available from KPS keypad in each zone Eight sources available from touchscreens and hand-held remotes Selectable turn-o
13、n source in each zone Each zone assignable to one of three ALL ON groups (or none) Expandable to 36 zones with additional PX-700 Controllers Compatible with PX-603 Multi-Room Expander (add up to 3 rooms per zone) Compatible with Audioaccess Multi-Room, 12-channel Amplifiers RadioFans.CN 收音机爱 好者资料库 S
14、pecifications PX-700 Multi-Room Audio Controller Inputs: Eight stereo audio inputs with buffered loop through capability One mono page input Trigger input allows sharing of audio sources with other systems Four-conductor keypad input PC Link jack RS-232 interface on front panel 9 Pin D-sub RS-232 in
15、terface on back panel Outputs: Six room preamp outputs (one per zone) Six independent fixed outputs One record output from the main zone Six programmable 12VDC trigger outputs (one per zone) Eight dedicated IR source outputs One All IR source output Audio: Connector: Gold Plated RCA Jack Input Imped
16、ance: 20k ohms Maximum Input Level (for 0.1% THD+N at any output): 2.0VRMS Output Impedance: 330 ohms Maximum Output Level Source Buffered Outputs: 2.0VRMS Primary Outputs: 2.75VRMS Expansion Outputs: 2.0VRMS Gain Source Buffered Outputs: 0 dB (Unity Gain) Primary Outputs: 18.5 dB (Volume set at 100
17、) Expansion Outputs: -1 dB S/N (Input at 2.2VRMS, 1kHz, Primary Room Volume at Unity Gain, Measurement Bandwidth: 22kHz) Source Buffered Outputs: 113 dB Primary Outputs: 95 dB Expansion Outputs: 100dB Frequency Response Source Buffered Outputs: 10Hz to 110kHz, 1dB Primary Outputs: 10Hz to 70kHz, 1dB
18、 Expansion Outputs: 10Hz to 75kHz, 1dB THD + Noise (Input: 1VRMS, 1kHz, Primary Room Volume at unity gain, measurement Bandwidth: 30kHz) Source Buffered Outputs: 0.003% Primary Outputs: 0.006% Expansion Outputs: 0.005% L/R Crosstalk (at 1kHz) Source Buffered Outputs: -110 dB Primary Outputs: -92 dB
19、Expansion Outputs: -104 dB Source to Source Crosstalk (at 1kHz, any two sources) Source Buffered Outputs: -110 dB Primary Outputs: -100 dB Expansion Outputs: -105 dB Volume Control : 0 to 100dB in 0.5 dB steps (1 dB steps via keypad commands) Bass: Shelving Type, 12 dB in 2 dB steps at 100Hz Treble:
20、 Shelving Type, 12 dB in 2 dB steps at 10kHz Trigger Input and Outputs: Connector: 3.5mm Mini Phone Jack Trigger Out and Zone Trigger Output Voltage: 8 to 16VDC (depending on line voltage and load), Tip Positive Page Trigger In: Dry Contact Trigger In: 4 to 30VDC, Tip Positive; 3 to 24VRMS AC Power
21、Inlet: Connector: Male IEC320 Power Requirement: 115V AC, 50/60Hz, 50 Watts (not including switched outlet)* Switched Outlet: Connector: NEMA 5-15R* Maximum Load: 300 Watts Dimensions 17.3 (440mm)W x 4 (102mm)H x 15.5 (394mm)D. Includes Connectors and Feet Weight 11.5 lb (5kg) *120V Version. 230V Ve
22、rsion Power Requirement is 230V AC, 50/60Hz, 50 Watts; Switched Outlet Connector is Female PX-700 Electrical/Mechanical Parts Lists Note: These parts lists may contain some part numbers that are not valid, or No Longer Available. Descriptions and Reference Designators, when included, should aid tech
23、nicians in part substitution. If necessary, call the Parts department at 1-516-496-3400 ext. 6553 for assistance. A A B B C C D D E E 44 33 22 11 PAGE TRIGGER IN AC TRIGGER INZone 1 Trigger Out Zone 2 Trigger Out Zone 3 Trigger Out Zone 4 Trigger Out Zone 5 Trigger Out Zone 6 Trigger Out AC Trigger
24、Out Note: C14 is the bypass cap for U1. C11 and C12 bypass +5v as it enters the board. 054-0006500 PX-700 Trigger Output Board C 11Friday, April 21, 2000 Title SizeDocument NumberRev Date:Sheetof AC Trigger In Trigger 4 Trigger 5 Trigger 6 VDD Mute In Trigger 1 Trigger 3 Trigger 4 Trigger 6 AC Relay
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- AudioAccess PX700 mac sm 维修 电路 原理图