McIntosh-MVP831-cd-sm维修电路原理图.pdf
《McIntosh-MVP831-cd-sm维修电路原理图.pdf》由会员分享,可在线阅读,更多相关《McIntosh-MVP831-cd-sm维修电路原理图.pdf(13页珍藏版)》请在收音机爱好者资料库上搜索。
1、SERVICE MANUAL COMPACT DISC TRANSPORT Performance Specifications . 2 Notes . 2 Safety Information. 2 Rear Panel. 3 Section Location . 3 Block Diagram . 4 Interconnection Diagram . 5 - 6 Main . 7 - 8 A/V Power Supply Schematic and PCB . 9 - 12 Display Schematic and PCB . 13 - 16 Parts List. 15 - 16 E
2、xploded View and Parts List. 17 - 18 Repacking Instructions . 19 CONTENTS RadioFans.CN 收音机爱 好者资料库 General SpecificationsVideo Specifications Digital Output Optical: -15dbm to -21dbm Coaxial: 0.5V p-p/75 ohm Digital Signal Format Sampling Frequency:44.1kHz & 48kHz Transport Laser Beam Wavelength:655n
3、m Laser PowerCLASS II Power Requirements 100 Volts, 50/60Hz at 28 watts 110 Volts, 50/60Hz at 28 watts 120 Volts, 50/60Hz at 28 watts 220 Volts, 50/60Hz at 28 watts 230 Volts, 50/60Hz at 28 watts 240 Volts, 50/60Hz at 28 watts Note: Refer to the rear panel of the MVP831 for the correct voltage. Dime
4、nsions Front Panel:17-1/2 inches (44.5cm) wide, 5-3/8 inches (13.7cm) high, depth behind front mounting panel is 15 inches (38.1cm) including clearance for connectors. Panel clearance required in front of mounting panel is 3/4 inch (1.9cm). Note: When the DVD/CD tray is opened, the panel clearance r
5、equired in front of mounting panel is 6-3/4 inches (17.2cm). Weight 20 pounds (9.0Kg) net, 34 pounds (15.4Kg) in shipping carton Signal System NTSC S-Video Y Output Level 1Vp-p (75 OHM) S-Video C Output Level 0.286Vp-p (75 OHM) (NTSC) Video Output Level 1Vp-p (75 OHM) Audio Specifications Number of
6、Channels 2 Output level 2.2Vrms DVD Frequency Response 4-22KHz (48KHz Sampling, Linear Audio) 4-44KHz (96KHz Sampling, Linear Audio) CD Frequency Response 4-20KHz CD Signal to Noise Ratio Better than 110dB (A-weighted) DVD Dynamic Range Better than 100dB (Linear Audio) CD Dynamic Range Better than 9
7、8dB Harmonic Distortion 0.003% (1KHz) Channel Separation Better than 110dB (1KHz) RadioFans.CN 收音机爱 好者资料库 PERFORMANCE SPECIFICATIONS 2 VIDEO SPECIFICATIONS Signal System:NTSC S-Video Y Output Level:1Vp-p (75 ohm) S-Video C Output Level:0.286Vp-p (75 ohm) (NTSC) Video Output Level:1Vp-p (75 ohm) AUDI
8、O SPECIFICATIONS Number Of Channels:2 Output Level:2.2Vrms DVD Frequency Response4-22kHz (48kHz Sampling, Linear Audio) 4-44kHz (96kHz Sampling, Linear Audio) CD Frequency Response:4-20kHz CD Signal To Noise Ratio:Better than 110dB (A-weighted) DVD Dynamic Range:Better than 100dB (Linear Audio) CD D
9、ynamic Range:Better than 98dB Harmonic Distortion:0.003% (1kHz) Channel Separation:Better than 110dB (1kHz) GENERAL SPECIFICATIONS Digital Output Optical:-15dbm to -21dbm Coaxial:0.5V p-p/75 ohm Transport Laser Power:CLASS II Laser Beam Wavelength:655nm Digital Signal Format Sampling Frequency:44.1k
10、Hz and 48kHz Power Requirements 100 Volts, 50/60Hz at 30 watts 110 Volts, 50/60Hz at 30 watts 120 Volts, 50/60Hz at 30 watts 220 Volts, 50/60Hz at 30 watts 230 Volts, 50/60Hz at 30 watts 240 Volts, 50/60Hz at 30 watts Note: Refer to the rear panel of the MVP831 for the correct voltage. Dimensions Fr
11、ont Panel:17-1/2 inches (44.5cm) wide, 5-3/8 inches (13.7cm) high, depth behind front mounting panel is 15 inches (38.1cm) including clearance for connectors. Panel clearance required in front of mounting panel is 3/4 inch (1.9cm). Note: When the DVD/CD tray is opened, the panel clearance required i
12、n front of mounting panel is 6-3/4 inches (17.2cm). 1. The heavy notes on the schematic denote the primary signal path. 2. Unless otherwise noted, all voltages indicated on the schematics are measured under the following conditions: a. AC input at 120 volts, 50/60Hz. b. All voltages are +/-10% with
13、respect to ground. A high impedance (10 megaohm) voltmeter must be used. 3. Unless otherwise specified: a. Resistor values are in ohms. b. Capacitor values are microfarads (uF). c. Inductor values are in microhenries (uH). 4.On PC board drawings, Square pad indicates: a. Polarized Capacitors - Posit
14、ive b. Diodes - Cathode c. Others - Pin 1 5.WARNING Parts marked with the symbol have critical characteristics. Use only replacement parts recom- mended by the manufacturer. SAFETY INFORMATION NOTES CAUTION: The use of optical instruments with this product will increase eye hazard. This product util
15、izes a class 1 laser. Invisible laser radiation is emitted from the optical pickup lens when the unit is turned on. 1. Do not look directly into the pickup lens. 2. Do not use optical instruments to look at the pickup lens. 3. Do not adjust the preset variable resistor on the optical pickup. 4. Do n
16、ot disassemble the optical pickup unit. 5. Use of controls or adjustment or performance of procedures other than those specified herein may result in hazardous radiation exposure. 6. Replace optical pickup only with manufacturers specified type. LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT VAROITUS! La
17、itteen kayttaminen muulla kuin tassa kayttoohjeessa mainitulla tavalla saattaa altistaa kayttajan turvallisuusluokan 1 ylittavalle nakymattomalle lasersateiiylle. VARNING! Om apparaten anvands pa annat satt an i denna bruksanvisning specificerats, kan anvandaren utsattas for osynbg laserstraining, s
18、om overskrider gransen for laserklass 1. Laser output:0.65mW Wavelength:665nm This product utilizes an embedded class 2 laser (IEC825). RadioFans.CN 收音机爱 好者资料库 MVP831 3 REAR PANEL SECTION LOCATIONS TOP VIEW WITH COVER REMOVED RadioFans.CN 收音机爱 好者资料库 4 BLOCK DIAGRAM RadioFans.CN 收音机爱 好者资料库 56 MVP831
19、INTERCONNECT RadioFans.CN 收音机爱 好者资料库 MAIN 320092 78 2 RadioFans.CN 收音机爱 好者资料库 AUDIO/VIDEO POWER SUPPLY049277 910 MVP831 3 RadioFans.CN 收音机爱 好者资料库 AUDIO/VIDEO POWER SUPPLY 049277 1112 3 RadioFans.CN 收音机爱 好者资料库 DISPLAY 0492784 MVP831 1314 RadioFans.CN 收音机爱 好者资料库 PARTS LIST 4DISPLAY 049278 PART NODESCR
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- McIntosh MVP831 cd sm 维修 电路 原理图