HarmanKardon-AVR3600-avr-sm维修电路原理图.pdf

《HarmanKardon-AVR3600-avr-sm维修电路原理图.pdf》由会员分享，可在线阅读，更多相关《HarmanKardon-AVR3600-avr-sm维修电路原理图.pdf（229页珍藏版）》请在收音机爱好者资料库上搜索。

1、 harman/kardon AVR 3600 AVR 3600 7 X 80W 7.1 CHANNEL A/V RECEIVER SERVICE MANUAL CONTENTS ESD WARNING.2 LEAKAGE TESTING.3 BASIC SPECIFICATIONS.4 PACKAGING.5 FRONT PANEL CONTROLS.6 REAR PANEL CONNECTIONS.8 REMOTE CONTROL FUNCTIONS.11 CONNECTIONS/INSTALLATION.14 INITIAL SETUP.17 OPERATION.21 TROUBLESH

2、OOTING GUIDE.27 REMOTE 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 and other U.S. and worldwide patents issued and pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc. (c) 19

3、96-2008 DTS, Inc. All Rights Reserved. Faroudja DCDi Cinema is a trademark of Genesis Microchip Inc. HD-DVD is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC). HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing L

4、LC. SACD is a trademark of Sony Corporation. TiVo is a registered trademark of TiVo Inc. SIRIUS and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All other marks and logos are the property of their respective owners. All rights reserved. SIRIUS subscription

5、 sold separately. Taxes and a one-time activation fee may apply. SIRIUS tuner required (sold separately) to receive the SIRIUS service. All programming and fees subject to change. It is prohibited to copy, decompile, disassemble, reverse engineer, hack, manipulate or otherwise make available any tec

6、hnology or software incorporated in receivers compatible with the SIRIUS Satellite Radio System. Service not available in Alaska or Hawaii. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owne

7、d by Macrovision Corporation and other rights owners. Use of this copy- right protection technology must be authorized by Macrovision Corporation and is intended for home and other lim- ited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or diassembly i

8、s prohibited. Please register your AVR 3600 at . Youll need the products serial number. At the same time, you can choose to be notified about new products and/or special promotions. 0139CSK - HK AVR 3600 OM Inlay ENG Marked_Rev 07 PRESS.qxp:HKP1477AVR245om.v2.qxd 22/07/09 15:24 Side 65 4 AVR 3600AVR

9、 3600 AVR 3600 3 3 visit AVR3600 harman/kardonharman/kardon 5 7 FRONT-PANEL CONTROLS ResolutionNavigationVideo Modes Source List Back/Exit OK Navigation Headphone Jack/EzSet/EQ Microphone Input Digital Audio Inputs (Optical and Coaxial Front) USB Port Video Front Input Analog Audio Front Inputs Surr

10、ound Modes Audio Effects Setup Standby/On Switch Info Settings VolumeMessage DisplayPower Indicator / / Remote IR Sensor NOTE: To make it easier to follow the instructions throughout the manual that refer to this illustration, a copy of this page may be downloaded from the Product Support section at

11、 . 0139CSK - HK AVR 3600 OM Inlay ENG Marked Rev 04.qxp:HKP1477AVR245om.v2.qxd 03/06/09 14:50 Side 7 FRONT PANEL CONTROLS AVR3600 harman/kardonharman/kardon 6 8 FRONT-PANEL CONTROLS Power Indicator: This LED has three possible modes: Main Power Off: When the AVR is unplugged or the rear- panel Main

12、Power Switch is off, this LED is off. Standby: Amber indicates that the AVR is ready to be turned on. On: When the AVR is turned on, this LED turns white. NOTE: If the PROTECT message ever appears, turn off the AVR and unplug it. Check all speaker wires for a possible short. If none is found, bring

13、the unit to an authorized Harman Kardon service center for inspection and repair before using it again. Standby/On Switch: This electrical switch turns the receiver on, or places it in Standby mode for quick turn-on. Setup Button: Press this button to access the AVRs main menu. Info Settings Button:

14、 Press this button to directly access the AVRs Source Info submenu, which contains the settings for the current source. Resolution: Press this button to access the AVRs video output resolution setting: 480i, 480p, 720p, 1080i, 1080p or 1080p/24 (if available on source and display). IMPORTANT NOTE: I

15、f the AVRs video output resolution is set higher than the capabilities of the actual connection, you will not see a picture. If the best available video connection from the AVR to the TV is composite video, press this button and change the resolution to 480i. Audio Effects:Press this button to direc

16、tly access the Audio Effects submenu, which allows adjustment of the tone and other audio controls. See the Initial Setup section for more information. Video Modes: Press this button for direct access to the Video Modes submenu, which contains settings that may be used to improve the picture, if nec

17、essary, after you have adjusted the picture settings using the video display or TV. Surround Modes:Press this button to select a surround sound (e.g., multichannel) mode. The Surround Modes menu will appear on screen, and the menu line will appear in the front-panel display. See the Advanced Functio

18、ns section for more information on surround modes. Source List: Press this button to select a source device, which is a component where a playback signal originates, e.g., DVD. Back/Exit: Press this button to return to the previous menu, or to exit the menu system. 5/17/3Navigation: These buttons ar

19、e used to navigate the AVRs menus. OK: Press this button to select the currently highlighted item. Headphone Jack/EzSet/EQ Microphone Input: Plug a 1/4 headphone plug into this jack for private listening. This jack is also used to connect the supplied microphone for the EzSet/EQ procedure described

20、in the Initial Setup section. USB Port: This port may be used in case a software upgrade for the receiver is offered in the future. Do not connect a storage device, peripheral product or a PC here, unless instructed to do so as part of an upgrade procedure. Digital Audio and Analog Audio/Video Front

21、 Inputs: Connect a source component that will only be used temporarily, such as a digital camera or game console, to these jacks. Use only one type of audio and one type of video connection. NOTE: The AVRs menus refer to these jacks as the Optical Front, Coaxial Front, Composite Front, and Analog Fr

22、ont inputs. Volume Knob:Turn this knob to raise or lower the volume. Message Display:Various messages appear in this two-line display in response to commands and changes in the incoming signal. In normal operation, the current source name appears on the upper line, while the surround mode is display

23、ed on the lower line. When the on-screen display menu system (OSD) is in use, the current menu settings appear. Remote IR Sensor:This sensor receives infrared (IR) commands from the remote control. It is important to ensure that it is not blocked. If covering the sensor is unavoidable, use an option

24、al Harman Kardon HE 1000, or other infrared receiver, connecting it to the Remote IR Input on the AVR 3600s rear panel. 0139CSK - HK AVR 3600 OM Inlay ENG Marked v2.qxp:HKP1477AVR245om.v2.qxd 28/05/09 11:18 Side 8 FRONT PANEL CONTROLS AVR3600 harman/kardonharman/kardon 7 9 REAR-PANEL CONNECTIONS Ana

25、log 1-5 Inputs 6/8 Channel Inputs Video 1, 2 use an analog video connection instead. Always make a separate audio connection. Analog 1 5 Inputs:Connect the left and right analog audio outputs of a source device to any of these inputs. These inputs may be paired with any video inputs. NOTES: The Anal

26、og 2 and 4 inputs are each associated with a set of outputs. Consider using these connectors for an audio or video recorder. You may optionally connect a source to both an analog and digital audio input. This is useful for making recordings, for multizone applications or simply as a backup. Analog 2

27、 and 4 Outputs:Connect either of these analog audio outputs to the analog audio inputs of a recording device. A signal is available at these outputs whenever an analog audio source is playing. Zone 2 Audio Outputs:Connect these jacks to an external amplifier to power the speakers in the remote zone

28、of a multizone system. Subwoofer Output:If you have a powered subwoofer with a line-level input, connect it to the Subwoofer Output. The Bridge III Input:Connect the included Harman Kardon docking station to this input for use with most docking iPod models, 4G and later, iPhone or iPhone 3G (not inc

29、luded). Turn the receiver off (Standby mode) when connecting The Bridge III. Fan Vents:This area contains vents used by the AVR 3600s fan to cool the system. Maintain a clearance of at least 3 inches from the nearest surface to avoid overheating the unit. It is normal for the fan to remain off at mo

30、st normal volume levels. An automatic temperature sensor turns the fan on only when it is needed. IMPORTANT NOTE: Never block the fan vents, as doing so could allow the AVR to overheat to dangerous levels. Video 1/2/3 Inputs: Use these jacks to connect your video- capable source components (e.g., VC

31、R, DVD player, cable TV box) to the receiver. Use only one type of video connection for each source. Video 2 Output:Connect this analog video output to the composite video input of a recording device. A signal is available at this output whenever an analog video source is playing. Video Monitor Outp

32、ut:If any of your sources use composite video connections, connect this monitor output to the corresponding input on your video display. If your video display is equipped with HDMI or component video inputs, this connection is unnecessary, as the AVR 3600 will convert the composite video source sign

33、al to the correct format for a single video-cable connection to the TV. Component Video 1/2 Inputs:If a video source has analog component video (Y/Pb/Pr) capability, and if you are not using an HDMI connection, connect the component video outputs of the source to one of the sets of component video i

34、nputs. Do not make any other video connections to that source. 0139CSK - HK AVR 3600 OM Inlay ENG Marked v2.qxp:HKP1477AVR245om.v2.qxd 28/05/09 11:18 Side 10 REAR PANEL CONNECTIONS AVR3600 harman/kardonharman/kardon 9 11 REAR-PANEL CONNECTIONS ENGLISH Component Video Monitor Outputs:If you are using

35、 one of the Component Video Inputs and your television or video display is component-video-capable (but does not have an HDMI input), connect these jacks to the video display. NOTES: Due to copy-protection restrictions, there is no output at the Component Video Monitor Outputs for HDCP-copy- protect

36、ed sources. Composite video signals are upscaled to as high as 1080i and available at these outputs. If your video displays best connection is component video, it is the only video connec- tion required from the AVR to the display. AM and FM Antenna Terminals:Connect the included AM and FM antennas

37、to their respective terminals for radio reception. Preamp Outputs:Connect these jacks to an external amplifier if more power is desired. The Surround Back/Zone 2 Preamp Outputs may be used with an external amplifier to power the remote zone of a multizone system. A-BUS Port:Use a Category 5/5e cable

38、 to connect this port to optional A-BUS equipment for multizone operation. When the A-BUS system is used, it is possible to have a full 7.1-channel system in the main listening room at the same time the multizone system is in use. Front, Center and Surround Speaker Outputs: Use two-conductor speaker

39、 wire to connect each set of terminals to the correct speaker. Remember to observe the correct polarity (positive and negative connections). Surround Back/Zone 2 Speaker Outputs:These speaker outputs are used for the surround back channels in a 7.1- channel home theater, or may be reassigned to a re

40、mote room for multizone operation. Switched AC Accessory Outlet:You may plug the AC power cord of one source device into this outlet, and it will turn on whenever you turn on the receiver. Do not use a source that consumes more than 50 watts of power. AC Power Input:After you have made all other con

41、nections, plug the AC power cord into this receptacle and into an unswitched wall outlet. 0139CSK - HK AVR 3600 OM Inlay ENG Marked v2.qxp:HKP1477AVR245om.v2.qxd 28/05/09 11:19 Side 11 REAR PANEL CONNECTIONS AVR3600 harman/kardonharman/kardon 10 12 MAIN REMOTE CONTROL FUNCTIONS AVR Power Off AVR Pow

42、er On Source Selectors Audio Effects Alphanumeric Keys Soft keys Volume Mute Device Power On Device Power Off Surround Modes Video Modes OK Navigation Activity Menu Disc Menu Channel Sleep Settings Learn Transport Controls IR Transmitter Lens Last Back/Exit Light Record Info Settings Setup Zone Sele

43、ctor LEARN SETUPINFOSLEEP NOTE: To make it easier to follow the instructions throughout the manual that refer to this illustration, a copy of this page may be downloaded from the Product Support section at . 0139CSK - HK AVR 3600 OM Inlay ENG Marked v2.qxp:HKP1477AVR245om.v2.qxd 28/05/09 11:19 Side

44、12 MAIN REMOTE CONTROL FUNCTIONS AVR3600 harman/kardonharman/kardon 11 13 MAIN REMOTE CONTROL FUNCTIONS The AVR 3600 remote is capable of controlling 8 devices, including the AVR itself and an iPod docked in the included The Bridge III. During the installation process, you may program the codes for

45、each of your source components into the remote. To operate a component, press its Selector button to change the device mode. Each Source Selector has been preprogrammed to control certain types of components, with only the codes specific to each brand and model changing, depending on which product c

46、ode is pro- grammed. The AUX and Cable/SAT Source Selectors may be used for multiple device types, depending on the first digit of the product code. Other Source Selectors may be reassigned to other device types (see Initial Setup section). AUX Source Selector: CD player product codes begin with 0,

47、1 or 2. VCR codes begin with 3 or 4. HDTV set-top box codes begin with 6, PVD codes begin with 7 and TiVoset-top box codes begin with 8. Cable/SAT Source Selector: Cable set-top box codes begin with 0, 1 or 2, and satellite set-top box codes begin with 3 or 4. IMPORTANT NOTE: All of the AVR 3600s au

48、dio and video inputs are independently assignable. Select the inputs to which the device is physically connected during Initial setup. Any device may be connected to any compatible input and given any name (e.g., DVD or Game). Most of the buttons on the remote have dedicated functions, although the

49、precise codes transmitted vary, depending on the device mode. Due to the wide variety of functions for various source devices, only a few of the most-often used functions on the remote have been included: alphanumeric keys, transport controls, television- channel control, menu access, and power on and off. Buttons dedicated to the AVR are available at any time, even in another device mode: AVR Power On and Off, Audio Effects, Video Modes, Surround Modes, Volume, M