Gemini-CDX601-cd-sm维修电路图 手册.pdf

《Gemini-CDX601-cd-sm维修电路图 手册.pdf》由会员分享，可在线阅读，更多相关《Gemini-CDX601-cd-sm维修电路图 手册.pdf（32页珍藏版）》请在收音机爱好者资料库上搜索。

1、(1) SERVICE MANUAL CDX-601-602 Compact Disc Players CONTENTS: Connections track number; pitch value; single-auto cue; continue (continuous play); and three different time displays: track time elapsed, track time remaining and total time remaining on disc. Time is measured in minutes, seconds and fra

2、mes. PLAYBACK DISPLAY: The PLAYBACK DISPLAY (7A) displays the play time remaining for each track. The display flashes slowly when the track has 15 seconds remaining and pulses rapidly when play time is down to five seconds. PLAY/PAUSE : Each press of PLAY/PAUSE (16) causes the operation to change fr

3、om PLAY to PAUSE or PAUSE to PLAY. TRACK SKIP : The TRACK SKIP (13) buttons let you select the track to play. SEARCH JOG WHEEL: The SEARCH JOG WHEEL (9) has two functions. Use the SEARCH JOG WHEEL to make fine adjustments in pause mode. Use the SEARCH JOG WHEEL to bend the pitch for precise synchron

4、i zation in PLAY mode. SEARCH DIAL: Use the SEARCH DIAL (8) to select the scanning direction and speed of your CD. Turning the dial in a clockwise direction scans forward while a counter-clockwise turn scans the track in reverse. Scan speed increases as the dial is turned. STOP : The STOP (6) button

5、 ends CD play. TIME: The TIME (4) button switches the time display between the three available choices listed under DISPLAY. FLY CUE: The FLY CUE (10) function lets you set cues “on the fly” with the press of a button. Press FLY CUE when the disc reaches the musical location you wish to make your cu

6、e or start point. The cue point is now programmed. Press CUE (15) to return to the cue point. Press PLAY/PAUSE and the unit starts from the pre-programmed spot. CUE: With the unit in the Play mode (PLAY/PAUSE LED is green) and after the cue point has been programmed, pressing CUE (15) will cause the

7、 CD player to enter the PAUSE mode (green PLAY/PAUSE LED blinks) at the programmed cue point (the CUE LED glows yellow). Holding down the cue button changes the function to PREVIEW and starts the CD from the programmed cue point. Releasing the CUE button will return the CD laser to the preset cue po

8、int. LOOP: After a cue point is programmed, pressing LOOP (11) while in the PLAY mode (CUE LED blinks yellow) repeats the section between the cue point and the point where the LOOP button was pressed. Press EXIT/RETURN or PAUSE/PLAY to EXIT Loop repeat. EXIT/RETURN: Press loop EXIT/RETURN (12) to re

9、turn to the beginning of the previously saved loop from normal play. SINGLE-AUTO CUE/CONTINUOUS: Pressing SINGLE-AUTO CUE/ CONTINUOUS (5) activates the AUTO CUE FUNCTION. The Auto Cue causes the CD to pause at the recorded beginning of the next track and allows you to segue into the next song with n

10、o “dead” air. Pressing SINGLE-AUTO CUE/CONTINUOUS a second time will activate the CONTINUOUS function. This causes the CD to repeat play continuously until SINGLE-AUTO CUE/CONTINUOUS is pressed a third time to deactivate the CONTINUOUS function. PITCH CONTROL: Pushing PITCH CONTROL (17) activates th

11、e PITCH section of the unit (PITCH LED glows red). The pitch of the CD will change according to the position of the PITCH SLIDE (14). PITCH BEND BUTTONS: Pushing the PITCH BEND (18) buttons will automatically raise the pitch up to +4% or lower the pitch down to -4% from the existing setting. Releasi

12、ng the buttons returns pitch to the original setting. Use this function to match the pitch bend when mixing from one song to another. DIGITAL OUTPUT JACK: Connecting any type of DAT, MD, HARD DRIVE, or other such items which accept digital signals to the BNC (20) output connector on the rear panel o

13、f your CDX allows you to record a digital signal from CD. OPERATING INSTRUCTIONS: 1. Make sure that the VOLTAGE SELECTOR (19) switch, found on the rear panel, is set for the proper voltage. Plug the unit in and press the POWER (1) switch. The unit is ON. Pushing POWER a second time turns the unit OF

14、F. 2. Press OPEN/CLOSE (3) and place a CD in the DISC TRAY (2). Press OPEN/CLOSE again. The tray will close. 3. Push TRACK SKIP (13) to select the track you wish to play. 4. Press PLAY/PAUSE (16) and the unit will instantly play. RadioFans.CN (5) FLY CUE & CUE INSTRUCTIONS: The FLY CUE function lets

15、 you set cues “on the fly” with the press of a button. Press FLY CUE when the disc reaches the musical location you wish to make your cue or start point. The cue point is now programmed. Press CUE to return to the cue point. Press PLAY/PAUSE and the unit instantly starts from this pre-programmed spo

16、t. AND/OR: 1. To pre-program a cue point (the spot on a CD at which you want play to start) select the proper track and push PLAY/PAUSE so the unit enters the PLAY mode (PLAY/PAUSE LED glows green). When the CD reaches the approximate musical spot you wish to make your cue, push PLAY/PAUSE so the un

17、it enters the PAUSE mode (PLAY/PAUSE LED blinks). Move the SEARCH JOG WHEEL forward or in reverse until the precise spot at which you want CD play to begin is located. Push PLAY/PAUSE. The cue point is now programmed. Press CUE to return to this pre-programmed cue point at any time. Push PLAY/PAUSE

18、and the unit will instantly play from the pre-selected spot. 2. To fine tune your pre-programmed cue point, push PLAY/PAUSE so the unit enters the PLAY mode. Push the CUE button and the CD will return to the cue point you programmed in step #1 and begin play from that point. If you decide this cue o

19、r starting point is okay, leave the unit alone until you are ready to play. 3. If, however, the selected spot is not exactly where you want it, push the CUE button while the CD is playing and the disc will return to the pre-programmed cue point. Locate the exact spot on the CD at which you want play

20、 to start by turning the SEARCH JOG WHEEL. Push PLAY/PAUSE to pre- program this new cue point. Press the CUE button to pause play at the new cue point. Push PLAY/PAUSE at any time and the unit will play from the pre-selected spot. TROUBLESHOOTING: If a disk will not play, check to see that it was lo

21、aded correctly (label side up) and that the CD unit is on a flat, level, stable surface. Check disc for dirt, scratches, spills, etc. If the disc spins but there is no sound, check the cable connections. If they are okay, check your amplifier or receiver. If the CD skips, check it for dirt, oil or s

22、cratches. Do not assume that the CD player or laser is defective. Many CDs are recorded “out of spec” and skip on most or all CD players. Before sending the unit to an authorized Gemini service technician, insert a disc that plays properly in another unit. CDX-602 ROBO START INSTRUCTIONS: IN SINGLE-

23、AUTO CUE MODE: Use ROBO START (25) in SINGLE-AUTO CUE MODE (5) to alternate play between the CDX-602s two CD players (one track from one side, then one from the other). In SINGLE-AUTO CUE MODE play starts immediately with no blank or “dead” space. ROBO START causes one side of the CD player to play

24、when the other side is paused. 1. Engage SINGLE-AUTO CUE MODE with the SINGLE-AUTO CUE/ CONTINUOUS button. 2. Press the ROBO START (25) button to activate ROBO START. Play will alternate between the two CD players. At the end of a track, the playing side pauses and the other CD deck plays a track. A

25、t the end of this track, the playing side pauses and the first CD deck resumes play. IN CONTINUOUS MODE OR DURING NORMAL PLAY: If you use the ROBO START function without SINGLE-AUTO CUE MODE (in CONTINUOUS MODE or during normal play), CD deck play does not alternate automatically. PAUSE must be pres

26、sed on the playing deck for the second deck to play. 1. During normal play, set a cue point on the second CD deck. 2. Press the ROBO START button to activate ROBO START. 3. Press PLAY/PAUSE BUTTON on the playing side to start play from the cue point on the other CD deck. NOTE: Pausing play in the mi

27、ddle of a track causes the other CD deck to play. When the new track ends, play resumes on the first CD player from the point at which it was paused. SPECIFICATIONS CDX-601/CDX-602: GENERAL: Type.Compact Disc Player Disc Type.Standard Compact discs (12 cm & 8 cm) Time Display.Track Elapsed, Track Re

28、main, or Total remain Variable Pitch. 12% Slider with Resume Switch Pitch Bend. 16% Maximum Instant Start.Within 0.03 seconds Track Selection.1 to 99 Tracks Installation.19 each Dimensions.19” x 3.5” x 10” Weight Per Unit.9.5 lbs. AUDIO SECTION: Quantization.1 Bit Linear/Channel, 3 Beam Laser Oversa

29、mpling Rate.8 Times Sampling Frequency.44.1 kHz Frequency Response.20 Hz to 20 kHz Digital Output.IEC958 Total Harmonic Distortion.Less Than 0.05% Signal to Noise Ratio.104 dB Dynamic Range.98 dB Channel Separation.90 dB (1 KHz) Output Level.1.9 Volts R.M.S. Power Supply.AC 115/230V, 60/50 Hz RadioF

30、ans.CN CDX-602（NEW）（）（MAIN UNIT） PARTS LIST (MODEL NO.) (ORIGINAL MODEL) ITEM PART NUMBER REV.QtyENGLISH NAME 1012-014A1PANEL CONTROL 2031-0401TOP COVER 3032-0961BOTTOM COVER 4021-6041SUB PANEL 5041-4791HEAT SINK 6041-4802HEAT SINK -C 7022-8602MOUNTING BRACKET 8022-0522HOLDER TRANSFORMER 9 10003-737

31、2DESK DOOR 11002-5731KNOB PUSH (DA) 12003-7431PUSE KEY INLAY (DA) 13002-5761KNOB PUSH KEY ASSY (C) 14003-7392PR OTECTOR INLAY 15003-7111 HOLDER LED 3 (7mm) 16047-4946PCB SUPPORT 17148-3161NAME PLATE (SMALL) 18049-2158PAD FOOT 19 20153-2131POLYFORM 21196-1073SERIAL NO:LABEL 22255-1801GIFT BOX 23157-9

32、791OWNERS MANUAL 24156-0891WARRANTY CARD 25190-0621SILICA GEL 26099-1671A LABEL 27099-1681J LABEL 28099-1691V LABEL 29099-0141LABEL MADE IN TAIWAN 30099-2141LABEL MADE IN CHINA 35099-2701LABEL FDA 36159-2336DOUBLE LABEL 37003-5812SPACER (EVA) 38160-0081PE BAG 85100mm 39160-0091PE BAG 230300mm 40160-

33、0441PE BAG 160250mm 41160-0521PE BAG 650 x650mm 42 43121-002A16BAND-HEAD TAPPING SCREW 44111-046A14BAND-HEAD TAPPING SCREW 45 46101-043A3FLAT-HEAD MACHINE SCREW 47110-172A6BAND-HEAD TAPPING SCREW/TWIN SCREW 48110-174A2BAND-HEAD TAPPING SCREW 49111-0301PAN-HEAD TAPPING SCREW 50111-044A4BAND-HEAD TAPP

34、ING SCREW 51111-0576FLAT-HEAD TAPPING SCREW RadioFans.CN CDX-602（NEW）（）（MAIN UNIT） PARTS LIST (MODEL NO.) (ORIGINAL MODEL) ITEM PART NUMBER REV.QtyENGLISH NAME 52 53131-0813NUT/WASHER 3mm 54143-0072SPRING WASHER 55 56170-336MASTER CARTON 57 58 59 60 1262-3932PRINTED CIRCUIT BOARD CDX802-1 2262-2911P

35、RINTED CIRCUIT BOARD CD01-4 3262-3941PRINTED CIRCUIT BOARD CDX802-2 4262-3952PRINTED CIRCUIT BOARD CDX802-3 5 6074-1812INTEGRATED CIRCUIT BA6218 7074-182A2INTEGRATED CIRCUIT BA6392FP (AT6392H) 8074-1842INTEGRATED CIRCUIT PCM1717E 9074-0741INTEGRATED CIRCUIT NJM7805FA 10074-1851INTEGRATED CIRCUIT NJM

36、79L05 11074-1862INTEGRATED CIRCUIT NJM317 12074-104S2INTEGRATED CIRCUIT NJM4558LD (M5218AL,BA15218N) 13074-1912INTEGRATED CIRCUIT CXA2550N 14074-1922INTEGRATED CIRCUIT CXD3068Q 15074-183B2INTEGRATED CIRCUIT P87C557E8 (P83C557E4) 16 17076-1372TRANSISTOR 2SA954(L) OR 2SA817(Y) 18076-1042TRANSISTOR 2SA

37、1048 OR 2SA1317 19076-0954TRANSISTOR 2SC2878 20076-0022SILICON TRANSISTORS 2SC945 (Q)(P) 21076-003SILICON TRANSISTORS OR 2SC1815 (Y)(GR) 22 23079-0278RECTIFIER DIODE 1N4002 (1N4003,1N4004) 24079-00310SILICON DIODE 1N4148 25080-1181 LIGHT EMITTING DIODE (RED) 3 26001-062A2CD PLAYER LOADER 27058-0212C

38、RYSTAL OSCILLATOR 16.9344MHz 28058-0222CRYSTAL OSCILLATOR 16MHz 29 30092-0592BNC CONNECTOR 31161-17322P RCA JACK 32092-1051AC INLET 33100-0691FUSE 20mm UL 1A AC250V 34 35147-0286 CHOKE COIL 3.3H 36 37059-2291POWER TRANSFORMER EI-5730 115/230V IN 8.3V 0 8.3V 850mA,11.7V 0 11.7V 900mA 38059-2361CHOKE

39、EE25.4 24mH 39059-2371FERRIT BEAD 14289H RadioFans.CN CDX-602（NEW）（）（MAIN UNIT） PARTS LIST (MODEL NO.) (ORIGINAL MODEL) ITEM PART NUMBER REV.QtyENGLISH NAME 40 41093-3701AC CORD 18AWG3C VW-1 42093-3711AC CORD 220V VDE 43093-372N1AC CORD 230V BS 45 46 47081-0231SLIDE SWITCH 2P2C UL 48082-042F2TACT SW

40、ITCH 49083-065F1POWER SWITCH UL 50 51091-45628P DIN MINI CONNECTOR WITH WIRE 1200mm 52092-14728P DIN MINI JACK 53091-4732(RCA TYPE) CONNECTOR CORD 1M 54 55050-029T2 ELECTROLYTIC CAPACITOR 5 10/16V 56050-049T3 ELECTROLYTIC CAPACITOR 6 100/16V 57050-146T2 ELECTROLYTIC CAPACITOR 6 220/16V 58050-0701 EL

41、ECTROLYTIC CAPACITOR 10 470/16V 59050-2051 ELECTROLYTIC CAPACITOR 1832 6800/25V 60050-1941 ELECTROLYTIC CAPACITOR 16 4700/16V 61050-0821 ELECTROLYTIC CAPACITOR 13 2200/16V 62 63050-112T2 ELECTROLYTIC CAPACITOR MINI 48 4.7/16V 64050-115T18 ELECTROLYTIC CAPACITOR MINI 48 10/16V 65050-111T2 ELECTROLYTI

42、C CAPACITOR MINI 48 22/16V 66050-113T4 ELECTROLYTIC CAPACITOR MINI 48 1/16V 67 68050-166T4 ELECTROLYTIC CAPACITOR MINI 57 47/16V 69050-174T38 ELECTROLYTIC CAPACITOR MINI 58 100/10V 70050-135T2 ELECTROLYTIC CAPACITOR MINI 68 100/16V 71 72055-0622 METAL FILM CAPACITORS 0.1/275VAC 73 74051-002T2CERAMIC

43、 CAPACITOR 2P/50V 75051-020T4CERAMIC CAPACITOR 27P/50V 76051-026T14CERAMIC CAPACITOR 47P/50V 77051-030T2CERAMIC CAPACITOR 68P/50V 78051-032T2CERAMIC CAPACITOR 82P/50V 79 80051-042T2CERAMIC CAPACITOR 220P/50V 81051-046T4CERAMIC CAPACITOR 330P/50V 82051-050T4CERAMIC CAPACITOR 470P/50V 83051-101T4 CERA

44、MIC CAPACITOR 0.0022/50V 84051-1561 CERAMIC CAPACITOR UL 0.0047/400V 85 86054-001T6 POLYESTER CAPACITOR 0.001/50V 87054-003T4 POLYESTER CAPACITOR 0.0015/50V 88054-006T4 POLYESTER CAPACITOR 0.0027/50V 89054-011T2 POLYESTER CAPACITOR 0.0068/50V RadioFans.CN CDX-602（NEW）（）（MAIN UNIT） PARTS LIST (MODEL

45、NO.) (ORIGINAL MODEL) ITEM PART NUMBER REV.QtyENGLISH NAME 90054-013T8 POLYESTER CAPACITOR 0.01/50V 91054-015T2 POLYESTER CAPACITOR 0.015/50V 92054-017T2 POLYESTER CAPACITOR 0.022/50V 93054-022T2 POLYESTER CAPACITOR 0.047/50V 94054-026T47 POLYESTER CAPACITOR 0.1/50V 95054-032T4 POLYESTER CAPACITOR 0.33/50V 96 97073-5042 RESISTOR NETWORKS 6P 5R 10K 98073-5052 RESISTOR NETWORKS 6P 5R 4.7K 99073-5082 RESISTOR NETWORKS 6P 5R 47K 100 101066-5184 1/8 W CARBO