Denon-AVRX1100W-avr-sm维修电路图 手册.pdf

《Denon-AVRX1100W-avr-sm维修电路图 手册.pdf》由会员分享，可在线阅读，更多相关《Denon-AVRX1100W-avr-sm维修电路图 手册.pdf（171页珍藏版）》请在收音机爱好者资料库上搜索。

1、MODELJPE3E2EKEAE1E1CE1K AVR-X1100WPPPPP AVR-S700WP INTEGRATED NETWORK AV RECEIVER Ver. 3 Please use this service manual with referring to the operating instructions without fail. Some illustrations using in this service manual are slightly different from the actual set. For purposes of improvement,

2、specifications and design are subject to change without notice. Please refer to the MODIFICATION NOTICE.e SERVICE MANUAL e D supports TMDS logic level. 48 TXC+ HDMI output Diferential Clock Output. Diferential clock output at the TMDS clock rate; supports TMDS logic level. 49 TXGND Ground TXAVDD Gro

3、und. 50 TX0 HDMI output Diferential Output Channel 0 Complement. Diferential output of the red data at 10 the pixel clock rate; supports TMDS logic level. 51 TX0+ HDMI output Diferential Output Channel 0 True. Diferential output of the red data at 10 the pixel clock rate; supports TMDS logic level.

4、52 TXGND Ground TXAVDD Ground. 53 TX1 HDMI output Diferential Output Channel 1 Complement. Diferential output of the red data at 10 the pixel clock rate; supports TMDS logic level. 54 TX1+ HDMI output Diferential Output Channel 1 True. Diferential output of the red data at 10 the pixel clock rate; s

5、upports TMDS logic level. 55 TXAVDD Power 1.8 V Power Supply for TMDS Outputs. 123 RadioFans.CN Pin No. Mnemonic Type Description 13 RXC_2 HDMI input Digital Input Channel 2 Complement of Port C in the HDMI Interface. 14 RXC_2+ HDMI input Digital Input Channel 2 True of Port C in the HDMI Interface.

6、 15 HP_CTRLD Digital output Hot Plug Detect for Port D. 16 5V_DETD Digital input 5 V Detect Pin for Port D in the HDMI Interface. 17 DGND Ground DVDD Ground. 18 DVDD Power Digital Supply Voltage (1.8 V). 19 DDCD_SDA Digital I/O HDCP Slave Serial Data Port D. DDCD_SDA is a 3.3 V input/output that is

7、5 V tolerant. 20 DDCD_SCL Digital input HDCP Slave Serial Clock Port D. DDCD_SCL is a 3.3 V input that is 5 V tolerant. 21 CVDD Power Receiver Comparator Supply Voltage (1.8 V). 22 CGND Ground TVDD and CVDD Ground. 23 RXD_C HDMI input Digital Input Clock Complement of Port D in the HDMI Interface. 2

8、4 RXD_C+ HDMI input Digital Input Clock True of Port D in the HDMI Interface. 25 TVDD Power Receiver Terminator Supply Voltage (3.3 V). 26 RXD_0 HDMI input Digital Input Channel 0 Complement of Port D in the HDMI Interface. 27 RXD_0+ HDMI input Digital Input Channel 0 True of Port D in the HDMI Inte

9、rface. 28 CGND Ground TVDD and CVDD Ground. 29 RXD_1 HDMI input Digital Input Channel 1 Complement of Port D in the HDMI Interface. 30 RXD_1+ HDMI input Digital Input Channel 1 True of Port D in the HDMI Interface. 31 TVDD Power Receiver Terminator Supply Voltage (3.3 V). 32 RXD_2 HDMI input Digital

10、 Input Channel 2 Complement of Port D in the HDMI Interface. 33 RXD_2+ HDMI input Digital Input Channel 2 True of Port D in the HDMI Interface. 34 CVDD Power Receiver Comparator Supply Voltage (1.8 V). 35 CGND Ground TVDD and CVDD Ground. 36 TXPVDD Power 1.8 V Power Supply for Digital and I/O Power

11、Supply. This pin supplies power to the digital logic and I/Os. It should be fltered and as quiet as possible. 37 TXPLVDD Power 1.8 V Power Supply. 38 TXGND Ground TXPVDD Ground. 39 TXPGND Ground TXPLVDD Ground. 40 EXT_SWING Analog input This pin sets the internal reference currents. Place an 887 res

12、istor (1% tolerance) between this pin and ground. 41 HPD_ARC Analog input Hot Plug Detect Signal. This pin indicates to the interface whether the receiver is connected. It supports 1.8 V to 5 V CMOS logic levels. 42 ARC+ Analog input Audio Return Channel Input (5 V Tolerant). 43 TXDDC_SDA Digital I/

13、O Serial Port Data I/O to Receiver. This pin serves as the master to the DDC bus. It supports a 5 V CMOS logic level. 44 TXDDC_SCL Digital output Serial Port Data Clock to Receiver. This pin serves as the master clock for the DDC bus. It supports a 5 V CMOS logic level. 45 TXAVDD Power 1.8 V Power S

14、upply for TMDS Outputs. 46 TXGND Ground TXAVDD Ground. 47 TXC HDMI output Diferential Clock Output. Diferential clock output at the TMDS clock rate; supports TMDS logic level. 48 TXC+ HDMI output Diferential Clock Output. Diferential clock output at the TMDS clock rate; supports TMDS logic level. 49

15、 TXGND Ground TXAVDD Ground. 50 TX0 HDMI output Diferential Output Channel 0 Complement. Diferential output of the red data at 10 the pixel clock rate; supports TMDS logic level. 51 TX0+ HDMI output Diferential Output Channel 0 True. Diferential output of the red data at 10 the pixel clock rate; sup

16、ports TMDS logic level. 52 TXGND Ground TXAVDD Ground. 53 TX1 HDMI output Diferential Output Channel 1 Complement. Diferential output of the red data at 10 the pixel clock rate; supports TMDS logic level. 54 TX1+ HDMI output Diferential Output Channel 1 True. Diferential output of the red data at 10

17、 the pixel clock rate; supports TMDS logic level. 55 TXAVDD Power 1.8 V Power Supply for TMDS Outputs. 124 RadioFans.CN Pin No. Mnemonic Type Description 99 PGND Ground PVDD Ground. 100 PVDD Power PLL Supply Voltage (1.8 V). 101 XTAL Miscellaneous analog Input pin for 28.63636 MHz crystal or an exte

18、rnal 1.8 V 28.63636 MHz clock oscillator source to clock the ADV7623. 102 XTAL1 Miscellaneous analog Crystal Output Pin. This pin should be left foating if a clock oscillator is used. 103 PVDD Power PLL Supply Voltage (1.8 V). 104 PGND Ground PVDD Ground. 105 HP_CTRLA Digital output Hot Plug Detect

19、for Port A. 106 5V_DETA Digital input 5 V Detect Pin for Port A in the HDMI Interface. 107 RTERM Miscellaneous analog This pin sets the internal termination resistance. A 500 resistor between this pin and ground should be used. 108 DDCA_SDA Digital I/O HDCP Slave Serial Data Port A. DDCA_SDA is a 3.

20、3 V input/output that is 5 V tolerant. 109 DDCA_SCL Digital input HDCP Slave Serial Clock Port A. DDCA_SCL is a 3.3 V input that is 5 V tolerant. 110 CVDD Power Receiver Comparator Supply Voltage (1.8 V). 111 CGND Ground TVDD and CVDD Ground. 112 RXA_C HDMI input Digital Input Clock Complement of Po

21、rt A in the HDMI Interface. 113 RXA_C+ HDMI input Digital Input Clock True of Port A in the HDMI Interface. 114 TVDD Power Receiver Terminator Supply Voltage (3.3 V). 115 RXA_0 HDMI input Digital Input Channel 0 Complement of Port A in the HDMI Interface. 116 RXA_0+ HDMI input Digital Input Channel

22、0 True of Port A in the HDMI Interface. 117 CGND Ground TVDD and CVDD Ground. 118 RXA_1 HDMI input Digital Input Channel 1 Complement of Port A in the HDMI Interface. 119 RXA_1+ HDMI input Digital Input Channel 1 True of Port A in the HDMI Interface. 120 TVDD Power Receiver Terminator Supply Voltage

23、 (3.3 V). 121 RXA_2 HDMI input Digital Input Channel 2 Complement of Port A in the HDMI Interface. 122 RXA_2+ HDMI input Digital Input Channel 2 True of Port A in the HDMI Interface. 123 HP_CTRLB Digital output Hot Plug Detect for Port B. 124 5V_DETB Digital input 5 V Detect Pin for Port B in the HD

24、MI Interface. 125 DGND Ground DVDD Ground. 126 DVDD Power Digital Supply Voltage (1.8 V). 127 DDCB_SDA Digital I/O HDCP Slave Serial Data Port B. DDCB_SDA is a 3.3 V input/output that is 5 V tolerant. 128 DDCB_SCL Digital input HDCP Slave Serial Clock Port B. DDCB_SCL is a 3.3 V input that is 5 V to

25、lerant. 129 CVDD Power Receiver Comparator Supply Voltage (1.8 V). 130 CGND Ground TVDD and CVDD Ground. 131 RXB_C HDMI input Digital Input Clock Complement of Port B in the HDMI Interface. 132 RXB_C+ HDMI input Digital Input Clock True of Port B in the HDMI Interface. 133 TVDD Power Receiver Termin

26、ator Supply Voltage (3.3 V). 134 RXB_0 HDMI input Digital Input Channel 0 Complement of Port B in the HDMI Interface. 135 RXB_0+ HDMI input Digital Input Channel 0 True of Port B in the HDMI Interface. 136 CGND Ground TVDD and CVDD Ground. 137 RXB_1 HDMI input Digital Input Channel 1 Complement of P

27、ort B in the HDMI Interface. 138 RXB_1+ HDMI input Digital Input Channel 1 True of Port B in the HDMI Interface. 139 TVDD Power Receiver Terminator Supply Voltage (3.3 V). 140 RXB_2 HDMI input Digital Input Channel 2 Complement of Port B in the HDMI Interface. 141 RXB_2+ HDMI input Digital Input Cha

28、nnel 2 True of Port B in the HDMI Interface. 142 HP_CTRLC Digital output Hot Plug Detect for Port C. 143 5V_DETC Digital input 5 V Detect Pin for Port C in the HDMI Interface. 144 DDCC_SDA Digital I/O HDCP Slave Serial Data Port C. DDCC_SDA is a 3.3 V input/output that is 5 V tolerant. 125 RadioFans

29、.CN ADV7623 Block diagram CH0 CH1 CH2 VIDEO DATA DE VS HS AUDIO DATA VIDEO DATA DE VS HS AUDIO DATA VIDEO DATA DE VS HS AUDIO DATA VIDEO DATA DE VS HS AUDIO DATA XTAL XTAL1 RXA_C RXB_C RXC_C RXD_C RXA_0 RXA_1 RXA_2 VIDEO/AUDIO CLOCK GENERATION RX PLL CEC TXC TX0 TX1 TX2 5V DETECT COMPONENT PROCESSOR

30、 SCL SDATA ALSB CS I2C CONTROLLER PWRDN RESET GLOBAL CONTROLS DDCA_SDA DDCA_SCL DDCB_SDA DDCB_SCL DDCC_SDA DDCC_SCL DDCD_SDA DDCD_SCL AP0_IN AP1_IN AP2_IN AP3_IN AP4_IN AP5_IN SCLK_IN MCLK_IN AP0_OUT AP1_OUT AP2_OUT AP3_OUT AP4_OUT AP5_OUT SCLK_OUT MCLK_OUT ARC+ RX EDID/ REPEATER CONTROLLER RX HPD C

31、ONTROLLER EP_MISO EP_MOSI EP_CS EP_SCK SPI MASTER/ SLAVE EQUALIZER RXB_0 RXB_1 RXB_2 EQUALIZER SAMPLER SAMPLER RXC_0 RXC_1 RXC_2 EQUALIZERSAMPLER RXD_0 RXD_1 RXD_2 EQUALIZER CEC CONTROLLER EDID RAM SAMPLER HDMI RECEIVER PROCESSOR TRANSMITTER PACKET BUILDER HDCP ENCRYPTION ENGINE HDMI ENCODER SERIALI

32、ZER TMDS DRIVERS INT1 INT2 INT_TX INTERRUPT CONTROLLER TXDDC_SDA TXDDC_SCL TX EDID/HDCP CONTROLLER EDID/HDCP BUFFER HPD_ARC TX HPD CONTROLLER HDCP DECRYPTION ENGINE SYNC MEASUREMENT PACKET PROCESSOR INFOFRAME PACKET MEMORY AUDIO PROCESSOR ARC RECEIVER AUDIO CAPTURE HDCP KEYS TX PLL ADV7623 5V_DETA 5

33、V_DETB 5V_DETC 5V_DETD HP_CTRLA HP_CTRLB HP_CTRLC HP_CTRLD OSD 126 RadioFans.CN DIGITAL_HDMI_ADV7623 : IC722 MX25L3206EM2I-12G (except : E2) MX25L6406EM2I-12G (ONLY E2) SN74CBT3251PWR (DIGITAL_HDMI_ADV7623 : IC723) Block diagram CS#1 2 3 4 8 7 6 5 SO/SIO1 WP# GND VCC HOLD# SCLK SI/SIO0 SYMBOL CS# SI

34、/SIO0 SO/SIO1 SCLK WP# HOLD# VCC GND Chip Select Serial Data Input (for 1 x I/O)/ Serial Data Input AECQ100 Qualified and PPAP Capable. MC14094B 5 3STATE TEST CIRCUIT FOR tPHZ AND tPZH VSS FOR tPLZ AND tPZL VDD R1 OUTPUT 50 pF O.E. CLOCK ST DATA Figure 1. R1 = 1 k = tPHL, tPLH R1 = 10 k = tPHZ, tPZH

35、, tPLZ, tPZL REGISTER STAGE 1 BLOCK DIAGRAM LATCH 13-STATE BUFFER 1 15 2 SERIAL DATA IN OUTPUT ENABLE CLOCKCLOCKSTROBE CLOCK CLOCKCLOCK CLOCK STROBE STROBE STROBE VDD 4 5 6 7 14 13 12 11 10 9 Q1 Q2 QS Q3 Q4 Q5 Q6 Q7 Q8 QS 2 3 4 5 6 7 8 REGISTER STAGE 2 REGISTER STAGE 3 REGISTER STAGE 4 REGISTER STAG

36、E 5 REGISTER STAGE 6 REGISTER STAGE 7 REGISTER STAGE 8 LATCH 2 LATCH 3 LATCH 4 LATCH 5 LATCH 6 LATCH 7 LATCH 8 3-STATE BUFFER2 3-STATE BUFFER3 3-STATE BUFFER4 3-STATE BUFFER5 3-STATE BUFFER6 3-STATE BUFFER7 3-STATE BUFFER8 CLOCKCLOCKSTROBE STROBE CLOCK CLOCK CLOCK CLOCK CLOCK CLOCK STROBE STROBE CLO

37、CK STROBE 3 1 *Input Protection Diodes * * * * 133 RadioFans.CN R1EX24128BSASOI (DIGITAL_MCU : IC752) Block diagram Pin Function Descriptions SN74LVC244APWR (DIGITAL_MCU LEVEL CHG : IC761) Block diagram Orderable Part numbers Internal organization Package Shipping tape and reel Halogen free Inner wi

38、re ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Orderable Part numbers Internal organization Package Shipping tape and reel Halogen free Inner wire ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Orderable Part numbers Internal organization Package Shipping

39、 tape and reel Halogen free Inner wire ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? FEATURES DESCRIPTION/ORDERING INFORMATION 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 1OE 1A1 2Y4 1A2 2Y3 1A3 2Y2 1A4 2Y1 GND VCC 2OE 1Y1 2A4 1Y2 2A3 1Y3 2A2 1Y4 2A1 DB, DGV, DW, N, NS,

40、OR PW PACKAGE (TOP VIEW) SN74LVC244A OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS SCAS414XNOVEMBER 1992REVISED MARCH 2005 Operates From 1.65 V to 3.6 V Inputs Accept Voltages to 5.5 V Specified From 40C to 85C and 40C to 125C Max tpdof 5.9 ns at 3.3 V Typical VOLP(Output Ground Bounce) 2 V at VCC= 3.3 V

41、, TA= 25C Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC) IoffSupports Partial-Power-Down Mode Operation Latch-Up Performance Exceeds 250 mA Per JESD 17 ESD Protection Exceeds JESD 22 2000-V Human-Body Model (A114-A) 200-V Machine Model (A115-A) 1000-V Cha

42、rged-Device Model (C101) This octal buffer/line driver is operational at 1.5-V to 3.6-V VCC, but is designed specifically for 1.65-V to 3.6-V VCCoperation. ORDERING INFORMATION TAPACKAGE(1)ORDERABLE PART NUMBERTOP-SIDE MARKING QFN RGYReel of 1000SN74LVC244ARGYRLC244A 40C to 85CVFBGA GQNSN74LVC244AGQ

43、NR Reel of 1000LC244A VFBGA ZQN (Pb-Free)SN74LVC244AZQNR PDIP NTube of 20SN74LVC244ANSN74LVC244AN Tube of 25SN74LVC244ADW SOIC DWLVC244A Reel of 2000SN74LVC244ADWR SOP NSReel of 2000SN74LVC244ANSRLVC244A 40C to 125CSSOP DBReel of 2000SN74LVC244ADBRLC244A Tube of 70SN74LVC244APW TSSOP PWReel of 2000S

44、N74LVC244APWRLC244A Reel of 250SN74LVC244APWT TVSOP DGVReel of 2000SN74LVC244ADGVRLC244A (1)Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at Please be aware that an important notice concerning availability, standard warranty, and

45、use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Copyright 19922005, Texas Instruments Incorporated Products conform to specifications per the terms o

46、f the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. 1 218 1Y1 1OE 1A1 416 1Y21A2 614 1Y31A3 812 1Y41A4 19 119 2Y1 2OE 2A1 137 2Y22A2 155 2Y32A3 173 2Y42A4 Pin numbers shown are for the DB, DGV, DW, N, NS, PW, and RGY packages. Abso

47、lute Maximum Ratings(1) SN74LVC244A OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS SCAS414XNOVEMBER 1992REVISED MARCH 2005 LOGIC DIAGRAM (POSITIVE LOGIC) over operating free-air temperature range (unless otherwise noted) MINMAXUNIT VCCSupply voltage range0.56.5V VIInput voltage range(2)0.56.5V VOVoltage r

48、ange applied to any output in the high-impedance or power-off state(2)0.56.5V VOVoltage range applied to any output in the high or low state(2)(3)0.5VCC+ 0.5V IIKInput clamp currentVI 050mA IOKOutput clamp currentVO 050mA IOContinuous output current50mA Continuous current through VCCor GND100mA DB package(4)70 DGV package(4)92 DW package(4)58 GQN/ZQN pa