Yamaha-RXA-730-Service-Manual-Part-2电路原理图.pdf
《Yamaha-RXA-730-Service-Manual-Part-2电路原理图.pdf》由会员分享,可在线阅读,更多相关《Yamaha-RXA-730-Service-Manual-Part-2电路原理图.pdf(60页珍藏版)》请在收音机爱好者资料库上搜索。
1、T3. EXTERNAL EVENT This menu is used to display the history of key operation. * No matter how many times the same key is pressed, it will be stored only once as its history. * The key operation during the self-diagnostic function mode will not be stored. All history of key operation will be erased b
2、y pressing the “STRAIGHT” key. * Numeric values in the figure are given as reference only. T3-2 7 A - A A T3-6 7 A - 9 E T 3 - 1 7E -2A T 3 - 5 7A -DE T3-3 7 A - 9 C T3-7 7 A - 9 C T3-4 7 A - A A T3-8 7 A - A A T3-1. HISTORY 1 T3-5. HISTORY 5 T3-2. HISTORY 2 T3-6. HISTORY 6 T3-3. HISTORY 3 T3-7. HIS
3、TORY 7 T3-4. HISTORY 4 T3-8. HISTORY 8 61 RX-V675/HTR-6066/RX-A730/TSR-6750 RX-V675/HTR-6066/ RX-A730/TSR-6750 List of key operation Display Key name Key numberAD value 1AD value 2AD value 3 020577 89FFFFMAIN ZONE 020840 53FFFFZONE 2 020F77 8900 09FFMAIN ZONE + STRAIGHT (Advanced setup mode) 0211xxF
4、FFFHD Radio CDM mode (U model) 0212xxFFFFHD Radio SPLIT mode (U model) 03002D 3FFFFFSCENE 1 (BD/DVD) 03011C 2CFFFFSCENE 2 (TV) 03020A 1BFFFFSCENE 3 (NET) 030300 09FFFFSCENE 4 (RADIO) 0500FF9C ADFFPROGRAM 0501FF8A 9BFFPROGRAM 0526FF0 9FFSTRAIGHT 0529FFFF9C ADPURE DIRECT 0800FF0A 1BFFTONE CONTROL 0A00
5、FFFF2D 3FINFO 0C00FFFFD2 E3ZONE CONTROL 2C00FFFF8A 9BTUNING 2C01FFFF77 89TUNING 2C02FFFF65 76AM 2C03FFFF54 64FM 2C04FFFF00 09PRESET 2C05FFFF0A 1BPRESET 2C06FFFF40 53MEMORY 0101VOLUME knob () 0102VOLUME knob (+) 0103INPUT knob () (RX-A730) 0104INPUT knob (+) (RX-A730) 7Axxxx* For the details of the r
6、emote control key display, refer to 7Exxxx“REMOTE CONTROL” . 62 RX-V675/HTR-6066/RX-A730/TSR-6750 RX-V675/HTR-6066/ RX-A730/TSR-6750 T4. INTERNAL INFORMATION T4-1. DSP INFORMATION This menu is used to display the DSP information stored in memory as backup data before rebooting. The DSP information w
7、ill be erased by pressing the STRAIGHT “ key. T4-1 D S P : - - / - - / - - Decode format Channels Sampling frequency Decode formatChannelsSampling frequency DisplayDecode format 0Analog 1PCM 2Dolby Digital 3Dolby Digital EX 4DTS 5DTS 9624 6DTS ES Matrix 7DTS ES Discrete 8DTS 96 ES Matrix 9AAC 10DSD
8、11Multi PCM 12Dolby Digital Plus 13Dolby Digital Plus EX 14Dolby True HD 15Dolby True HD EX 16DTS Express 17DTS HD 18DTS HD Master Audio 19Digital 20MP3 21WMA 22FLAC 25“Unknown” DisplayChannels 0Dual Mono 11/0 22/0 33/0 42/1 53/1 62/2 73/2 82/3 93/3 102/4 113/4 12HD Multi channel 13“Unknown” Display
9、Sampling frequency kHz 032 144.1 248 364 488.2 596 6128 7176.4 8192 108 1111 1212 1316 1422.05 1524 16“Unknown” -: Not stored T4-2 B U E R R : - 2 5 5 T4-3 N R C : 0 T4-4 I N V A L I D I T E M T4-2. BU ERROR Not for service. T4-3. NRC (Net Restart Counter) Not for service. T4-4. INVALID ITEM Not for
10、 service. 63 RX-V675/HTR-6066/RX-A730/TSR-6750 RX-V675/HTR-6066/ RX-A730/TSR-6750 P1-1 D C : 5 0 P1. SYSTEM MONITOR This menu is used to display the A/D conversion value of the microprocessor which detects panel keys and protection functions by using the sub-menu. When “P1-8. KEY” sub-menu is select
11、ed, keys become inoperable due to detection of the values of all keys. However, it is possible to advance to the next menu by pressing the “SCENE RADIO” (forward) key or “SCENE NET” (reverse) key on the remote control. * Numeric values in the figure are given as reference only. P1-1. DC Power amplif
12、ier DC (DC voltage) output is detected. The voltage at 5 pin (DC_PRT) of IC78 is displayed. Normal value: 32 to 74 (Reference voltage: 3.3 V=255) * If DC becomes out of the normal value range, the protection function works to turn off the power. P1-2. PS Power supply voltage (PS) protection detectio
13、n. The voltage at 2 pin (PS1_PRT)/1 pin (PS2_PRT)/13 pin (PS3_PRT) of IC78 are displayed. Voltage detects PS1: ACBL, AC12, AC5, 7 PS2: -VP, +5T, 5V PS3: +5.5V Normal value PS1: 51 to 179 PS2: 92 to 147 (PURE DIRECT mode: 139 to 193) PS3: 132 to 168 (Reference voltage: 3.3 V=255) * If PS1, PS2 or PS3
14、 becomes out of the normal value range, the protection function works to turn off the power. P1-2 P S : 1 1 7 / 1 2 0 / 1 5 3 PS3 PS2 PS1 64 RX-V675/HTR-6066/RX-A730/TSR-6750 RX-V675/HTR-6066/ RX-A730/TSR-6750 P1-5 O U T L V L : 2 5 5 P1-5. OUTPUT LEVEL Output level of speaker output is detected. Th
15、e voltage at 4 pin (AMP_OLV) of IC78 is displayed. (Reference voltage: 3.3 V=255) P1-6 L M T C N T : 2 5 5 P1-6. LIMITER CONTROL Power limiter control is detected. The voltage at 4 pin (AMP_LMT) of IC83 is displayed. (Reference voltage: 3.3 V=255) P1-7 L 3 : 0 P1-7. L3 (J model) Not for service. P1-
16、4. INVALID ITEM Not for service. P1-4 I N V A L I D I T E M P1-3 T M a : 1 1 2 / 1 0 5 THM2 THM1 P1-3. THM Temperature of the heatsink (THM) is detected. The voltage at 12 pin (THM1) of IC78/1 pin (THM2) of IC76 are displayed. Normal value THM1: 42 to 255 THM2: 42 to 255 (U, C models) (Reference vol
17、tage: 3.3 V=255) * If THM1 or THM2 becomes out of the normal value range, the protection function works to turn off the power. 65 RX-V675/HTR-6066/RX-A730/TSR-6750 RX-V675/HTR-6066/ RX-A730/TSR-6750 KEY2 KEY1 P1-8. KEY Panel key is detected. When the A/D conversion value of the panel key becomes out
18、 of the specified range, normal operation will not be available. In that case, check the constant of voltage dividing resistor, solder condition, etc. Refer to table. * When “P1-8. KEY” menu is selected, keys become inoperable due to detection of the values of all keys. However, it is possible to ad
19、vance to the next menu by pressing the “SCENE RADIO” (forward) key or “SCENE NET” (reverse) key on the remote control. (Reference voltage: 3.3 V=255) P1-8 K Y : 2 5 5 / 2 5 5 DisplayKEY2 0 11 PURE DIRECT 12 32 TUNING 33 54 TUNING 122 144 PRESET 227 246 PROGRAM (RX-V675/HTR-6066/TSR-6750 models) 143
20、172 INPUT TUNING PRESET PROGRAM INPUT MAIN ZONE (power) TONE CONTROL (RX-V675/HTR-6066/TSR-6750 models) Pin No. I/O Port NameFunction NameRelated Power SupplyDetail of Function OFFON 155 IIO0_7/N_RTS6/N_CTS6/N_SS6/ AN15_7/P15_7 SVID_DETVID_PONIIS-video detect 156 IIO0_6/CLK6/AN15_6/P15_6HP_N_DETDSP_
21、PONOIHeadphone detection 157 IIO0_5/RXD6/SCL6/STXD6/AN15_5/ P15_5 -ACOONo used 158 IIO0_4/TXD6/SDA6/SRXD6/AN15_4/ P15_4 DC_TRG1PRYOOControl out 1 159 IIO0_3/N_RTS7/N_CTS7/AN15_3/ P15_3 DSP1_N_INTDSP_PONOIInterrupt from DSP1 (for DAU_N_INT distinction) 160 IIO0_2/RXD7/AN15_2/P15_2UART spareACOONo use
22、d, spare for UART 161 IIO0_1/CLK7/AN15_1/P15_1-ACOONo used 162 VSSVSS- 163 IIO0_0/TXD7/AN15_0/P15_0UART spareACOONo used, spare for UART 164 VCCVCC- 165 KI3/AN_7/P10_7+3.3S_PON+3.3S_PONOO+3.3S power supply 166 KI2/AN_6/P10_6AD2_COM+3.3S_PONOIAD selector 2 COM input 167 KI1/AN_5/P10_5AD1_COM+3.3S_PON
23、OIAD selector 1 COM input 168 KI0/AN_4/P10_4HSW_2CHIPACIIHDMI SW number distinction 169 AN_3/P10_3-ACOONo used 170 AN_2/P10_2KY_AD2ACOIKey 2 171 AN_1/P10_1KY_AD1ACOIKey 1 172 AVSSAVSS- 173 AN_0/P10_0 TUN_N_RSTPRYOOTuner reset HDR_N_RSTPRYOOHD radio reset 174 VREFVREF- 175 AVCCAVCC- 176 STXD4/SCL4/RX
24、D4/ADTRG/P9_7 TUN_SCLPRYOOTuner I2C clock HDR_MISOPRYOIHD radio reception data 91 RX-V675/HTR-6066/RX-A730/TSR-6750 RX-V675/HTR-6066/ RX-A730/TSR-6750 IC76, 78: SN74LV4051APWR (DIGITAL (1) P.C.B.) 8-channel analog multiplexers/demultiplexers Microprocessor extended port IC76 IC78 Y0 Y1 Y2 Y3 Y4 Y5 Y
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Yamaha RXA 730 Service Manual Part 电路 原理图