Yamaha-DVDS-30-Service-Manual电路原理图.pdf
《Yamaha-DVDS-30-Service-Manual电路原理图.pdf》由会员分享,可在线阅读,更多相关《Yamaha-DVDS-30-Service-Manual电路原理图.pdf(45页珍藏版)》请在收音机爱好者资料库上搜索。
1、IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore
2、not been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any s
3、ervice required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or estab
4、lish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitab
5、le and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated
6、by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. 100972 P.O.Box 1, Hamamatsu, Japan 2005 All rights reserved. This manual is c
7、opyrighted by YAMAHA and may not be copied or redistributed either in print or electronically without permission. SERVICE MANUAL DVD HOME THEATER SOUND SYSTEM DVX-S30 DVD PLAYER DVD-S30 DVD-S30 The DVX-S30 consists of the DVD-S30, the AVC-S30 and the NX-P30. This service manual is for the DVD-S30. F
8、or the AVC-S30 (including AVC-35 and NX-P30) service manual, please refer to the following publication number: AVC-S30 / AVC-S35 / NX-P30 100971 DVX-S30DVD-S30、AVC-S30及NX-P30構成。 DVD-S30用。 AVC-S30用 (AVC-S35、NX-P30含) 下記参照。 AVC-S30 / AVC-S35 / NX-P30 100971 MAINTENANCE FLOW CHART .1720 .2124 IC DATA .2
9、526 DISPLAY DATA .27 BLOCK DIAGRAM.29 PRINTED CIRCUIT BOARD .3034 SCHEMATIC DIAGRAM.3537 PARTS LIST.3945 REMOTE CONTROL .46 I CONTENTS TO SERVICE PERSONNEL .25 PREVENTION OF ELECTROSTATIC DISCHARGE .5 LOCALE MANAGEMENT INFORMATION .5 SYSTEM COMPOSITION .6 FRONT PANELS.7 REAR PANELS.78 REMOTE CONTROL
10、 PANELS .9 SPECIFICATIONS / 参考仕様.1011 INTERNAL VIEW .11 TRADE MODE / .12 DISASSEMBLY PROCEDURES / 分解手順.1316 05.09 RadioFans.CN 收音机爱 好者资料库 DVD-S30 2 DVD-S30 WALL OUTLET EQUIPMENT UNDER TEST AC LEAKAGE TESTER OR EQUIVALENT INSULATING TABLE WARNING: CHEMICAL CONTENT NOTICE! The solder used in the produ
11、ction of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive h
12、arm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or comp
13、onents located inside the enclosure of this product, wash your hands before handling food. Side A Side B SMT REFLOW Process MI FLOW Process Solder Dip Among some types of lead free solder currently available, it is recommended to use one of the following types for the repair work. Sn + Ag + Cu (tin
14、+ silver + copper) Sn + Cu (tin + copper) Sn + Zn + Bi (tin + zinc + bismuth) Caution: 1. As the melting point temperature of the lead free solder is about 30C to 40C (50F to 70F) higher than that of the lead solder, be sure to use a soldering iron suitable to each solder. 2. If lead solder must be
15、used, be sure to remove lead free solder from each terminal section of the parts to be replaced and from the area around it completely before soldering, or make sure that the lead free solder and lead solder melt together fully. 無鉛種類、修理時 下記無鉛使用推奨。 Sn+Ag+Cu (錫+銀+銅) Sn+Cu (錫+銅) Sn+Zn+Bi (錫+亜鉛+) 注意: 1.
16、 無鉛融点温度通常鉛入比30 40程度高、 合使用。 2. 鉛入使得場合、交 換部品端子部周辺部無鉛取 除、無鉛鉛入十分 溶状態付。 About Lead Free Solder / 無鉛 The P.C.B.s installed in this unit are soldered using the following solder. 本機搭載基板付使用 下記通。 AV P.C.B. OPERATION P.C.B. Side A / A 面 Lead Free Solder / 無鉛 Lead Free Solder / 無鉛 Side B / B面 Lead Free Solder /
17、 無鉛 Lead Free Solder / 無鉛 I TO SERVICE PERSONNEL 1. Critical Components Information Components having special characteristics are marked Z and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has
18、 been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohms shunted by 0.15F. GLeakage current must not exceed 0.5mA. GBe sure to test for leakage with the AC plug in both polarities.
19、 RadioFans.CN 收音机爱 好者资料库 DVD-S30 3 DVD-S30 WARNING: Laser Safety This product contains a laser beam component. This component may emit invisible, as well as visible radiation, which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must be used durin
20、g servicing of the unit. 1) When testing and/or repairing any component within the product, keep your eyes and skin more than 30 cm away from the laser pick-up unit at all times. Do not stare at the laser beam at any time. 2) Do not attempt to readjust, disassemble or repair the laser pick-up, unles
21、s noted elsewhere in this manual. 3) CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Laser Diode Properties Type:Semiconductor laser GaAlAs Wave length:650 nm (DVD) 780 nm (VCD/CD) Output Power:7 mW (DV
22、D) 10 mW (VCD/CD) Beam divergence:60 degree 半導体 GaAlAs 波長650 nm (DVD) 780 nm (VCD/CD) 出力7 mW (DVD) 10 mW (VCD/CD) 広60 度 2) The laser power level can be adjusted with the VR on the pick-up PWB, however, this level has been set by the factory prior to shipping from the factory. Do not adjust this lase
23、r level control unless instruction is provided elsewhere in this manual. Adjustment of this control can increase the laser emission level from the device. 警告:安全対策 本機光線放射部品搭載。 部品放射光線目損傷起。 光線目及肌保護、 本機 修理作業中下記注意厳守。 ) 時修理時、 目及肌光 30c以上離。 場合 光線見。 ) 光再調整及分解。 ) 上指定以外制御、 調整、 手順光線照射結果招恐 。 ) 光基板上VR 調整可能、工場出荷前調
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Yamaha DVDS 30 Service Manual 电路 原理图