Yamaha-DVXS-150-Service-Manual电路原理图.pdf
《Yamaha-DVXS-150-Service-Manual电路原理图.pdf》由会员分享,可在线阅读,更多相关《Yamaha-DVXS-150-Service-Manual电路原理图.pdf(100页珍藏版)》请在收音机爱好者资料库上搜索。
1、SERVICE MANUAL This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore no
2、t been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any ser
3、vice required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establi
4、sh a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
5、 and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by
6、 grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. IMPORTANT NOTICE 100917 SERVICE MANUAL DVR-S150/NX-P150 HOME THEATER SOUND SYST
7、EM DVX-S150 The DVX-S150 is composed of the DVR-S150 and the NX-P150. DVX-S150 DVR-S150NX-P150 構成。 DVR-S150 SELF DIAGNOSIS FUNCTION (DIAG) / DVR-S150自己診断機能() . . . . . . . . . .2243 DVR-S150 D-AMP MODULE TROUBLESHOOTING / DVR-S150 D-故障診断 . . . . . . . .44 DVR-S150 AMP ADJUSTMENT / DVR-S150部調整 . . .
8、. . . . . . . . . . . . . . . . . . . .44 DISPLAY DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 IC DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4656 DVR-S150 BLOCK DIAGRAM . . . . . . . . . . . . . .5759 DVR-S150 PRINTED CIRCUIT BOARD . . . . . . .6068 NX-SW
9、150 PRINTED CIRCUIT BOARD . . . . . . . . .69 DVR-S150 SCHEMATIC DIAGRAM . . . . . . . . . .7079 NX-SW150 SCHEMATIC DIAGRAM . . . . . . . . . . . .80 PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8199 REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . .100 I CONTENTS
10、TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . .24 PREVENTION OF ELECTRO STATIC DISCHARGE . . . . . .4 LOCALE MANAGEMENT INFORMATION . . . . . . . .5 SYSTEM COMPOSITION / 構成 . . . . . . . . . . .5 FRONT PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . .67 REMOTE CONTROL PANELS . .
11、. . . . . . . . . . . . . . . .7 REAR PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 SPECIFICATIONS / 参考仕様 . . . . . . . . . . . . . . . .1012 INTERNAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 DVR-S150 DISASSEMBLY PROCEDURES / DVR-S150分解手順 . . . . . . . . . .
12、. . . . . . . . . . . . . .1418 NX-SW150 DISASSEMBLY PROCEDURES / NX-SW150分解手順 . . . . . . . . . . . . . . . . . . . . . . .1920 DVR-S150 TRAY LOCK MODE / DVR-S150 . . . . . . . . . . . . . . . . .21 DVR-S150 NX-P150 04.08 RadioFans.CN 收音机爱 好者资料库 DVR-S150/NX-P150 2 DVR-S150 NX-P150 I TO SERVICE PERS
13、ONNEL 1. Critical Components Information Components having special characteristics are marked Z and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify
14、 that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohm shunted by 0.15F. AC LEAKAGE TESTER OR EQUIVALENT EQUIPMENT UNDER TEST INSULATING TABLE WALL OUTLET GLeakage current must not exceed 0.5mA. GBe sure to test for leakag
15、e with the AC plug in both polarities. WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welf
16、are Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do no
17、t inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food. About lead-free solder / 無鉛 Among some types of lead-free solder currently available, it is recommended to u
18、se one of the following types for the repair work. Sn + Ag + Cu (tin + silver + copper) Sn + Cu (tin + copper) Sn + Zn + Bi (tin + zinc + bismuth) Caution: 1. As the melting point temperature of the lead-free solder is about 30C to 40C (50F to 70F) higher than that of the lead solder, be sure to use
19、 a soldering iron suitable to each solder. 無鉛種類、修理時 下記無鉛使用推奨。 Sn+Ag+Cu (錫+ 銀+銅) Sn+Cu (錫+ 銅) Sn+Zn+Bi (錫+ 亜鉛+) 注意: 1. 無鉛融点温度通常鉛入比30 40 程度高、 合使用。 The P.C.B.s installed in this unit are soldered using the fol- lowing solder. 本機搭載基板付使用 下記通。 SI DE A / A面SI DE B / B面 DI GI TAL P. C. B.Lead Free Solder /
20、無鉛Lead Free Solder / 無鉛 MAI N P. C. B.Lead Free Solder / 無鉛 SUB P. C. B.Lead Free Solder / 無鉛 Side A Side B SMT REFLOW Process MI FLOW Process Solder Dip RadioFans.CN 收音机爱 好者资料库 DVR-S150/NX-P150 DVR-S150 NX-P150 3 WARNING: Laser Safety This product contains a laser beam component. This component may
21、 emit invisible, as well as visible radiation, which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must be used during servicing of the unit. 1) When testing and/or repairing any component within the product, keep your eyes and skin more than 30
22、cm away from the laser pick-up unit at all times. Do not stare at the laser beam at any time. 2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere in this manual. 3) CAUTION : Use of controls, adjustments or performance of procedures other than those specifi
23、ed herein may result in hazardous radiation exposure. Laser Emitting conditions: 1) When the Top Cover is removed, and the STANDBY/ ON SW is turned to the ON position, the laser component will emit a beam for several seconds to detect if a disc is present. During this time (5-10 sec.) the laser may
24、radiate through the lens of the laser pick- up unit. Do not attempt any servicing during this period! If no disc is detected, the laser will stop emitting the beam. When a disc is loaded, you will not be exposed to any laser emissions. 2) The laser power level can be adjusted with the VR on the pick
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Yamaha DVXS 150 Service Manual 电路 原理图