Yamaha-CDRHD-3100-Service-Manual电路原理图.pdf

《Yamaha-CDRHD-3100-Service-Manual电路原理图.pdf》由会员分享，可在线阅读，更多相关《Yamaha-CDRHD-3100-Service-Manual电路原理图.pdf（70页珍藏版）》请在收音机爱好者资料库上搜索。

1、There are two types of CDR-HD1300; one equipped with a hard disc drive and the other without it depending on market areas. CDR-HD1300E is equipped with a hard disc drive. CDR-HD1300/CDR-HD1300E CDR-HD1300販売地域 搭載、搭載 。 CDR-HD1300E搭載 。 100813 P.O.Box 1, Hamamatsu, Japan I CONTENTS TO SERVICE PERSONNEL

2、. 23 PREVENTION OF ELECTRO STATIC DISCHARGE . 4 FRONT PANELS. 5 REAR PANELS . 56 REMOTE CONTROL PANELS. 7 SPECIFICATIONS. 7 INTERNAL VIEW . 8 DISASSEMBLY PROCEDURE / 分解手順 . 915 SERVICE CHECK PROCEDURES / 手順 . 1619 INSPECTIONS / 検査. 2025 FIRMWARE UPDATE / 更新 . 2627 FORMATTING THE HDD / HDD . 27 Enter

3、ing ID to main P.C.B. / PCBID書込 . 2829 DISPLAY DATA . 3031 IC DATA . 3239 BLOCK DIAGRAM. 40 PRINTED CIRCUIT BOARD . 4144 SCHEMATIC DIAGRAM . 4549 PARTS LIST. 5067 REMOTE CONTROL. 68 Parts List for Carbon Resistors . 69 SERVICE MANUAL HDD/CD RECORDER CDR-HD1300/CDR-HD1300E IMPORTANT NOTICE This manua

4、l has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated. WARNING:

5、Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be p

6、erformed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent rela

7、tionship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are s

8、ubject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to th

9、e ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. RadioFans.CN 收音机爱 好者资料库 Copyright 2002 YAMAHA CORPORATION This manual is copyrighted by YAMAHA and may n

10、ot be copied or redistributed either in print or electronically without permission. Copyright 2002 YAMAHA CORPORATION This manual is copyrighted by YAMAHA and may not be copied or redistributed either in print or electronically without permission. CDR-HD1300/CDR-HD1300E 2 CDR-HD1300/CDR-HD1300E WALL

11、 OUTLET EQUIPMENT UNDER TEST AC LEAKAGE TESTER OR EQUIVALENT INSULATING TABLE I TO SERVICE PERSONNEL 1. Critical Components Information Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current

12、 Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohm shunted by 0.15F. GLeakage current must not exceed 0.5mA. GBe sure to te

13、st for leakage with the AC plug in both polarities. THE COMPACT DISC RECORDER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/ele

14、ctronic and /or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS

15、 IN YOUR MOUTH FOR ANY REA- SON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hand

16、s before handling food. WARNING: Laser Safety This product contains a laser beam component. This component may emit invisible, as well as visible radiation, which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must be used during servicing of the

17、unit. 1) When testing and/or repairing any component within the product, keep your eyes and skin more than 30 cm away from the laser pick-up unit at all times. Do not stare at the laser beam at any time. 2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere i

18、n this manual. 3) CAUTION: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Laser Emitting conditions: 1. This device is a Class IIIb laser device. Class IIIb means With the protective case removed, exposure to th

19、e light output from the laser, either directly or reflected by a mirror, can cause harm to the eyes, but there is no danger to the eyes from exposure to dispersed reflected laser light. (Generally 0.5 W or less) 2. Always wear eyeglasses designed for protection against laser light. 3. Always wear gl

20、oves. 4. Have no reflective objects anywhere near this device. 5. Figure A shows from where in this device the laser is emitted. 6. When switching on the power to the device for the first time, always measure the laser power with a laser power meter and check that the power is no greater than the nu

21、mber of Watts in the specifications. 7. Never look directly at the laser light while the laser is emitting light. 8. Do not allow the laser light to shine directly on your skin while the laser is emitting light. RadioFans.CN 收音机爱 好者资料库 CDR-HD1300/CDR-HD1300E 3 CDR-HD1300/CDR-HD1300E CLASS 1 LASER PR

22、ODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPART PRODUIT LASER DE CLASSE 1 LINE IN LINE OUTINOUT DIGITAL RECCOAXIALOPTICALCOAXIALOPTICAL RS232C VIDEO VIDEO OUT S VIDEO ANALOG PLAY R L R L 43 CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPART PR

23、ODUIT LASER DE CLASSE 1 U model CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPART PRODUIT LASER DE CLASSE 1 LINE IN LINE OUTINOUT DIGITAL RECCOAXIALOPTICALCOAXIALOPTICAL RS232C VIDEO VIDEO OUT S VIDEO ANALOG PLAY R L R L 43 CLASS 1 LASER PRODUCT LASER KLASSE 1 PRO

24、DUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPART PRODUIT LASER DE CLASSE 1 B, G models VARO!:AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA N K Y M T T M L L E L A S E R - STEILYLLE. L KATSO STEESEEN. VARNING!: OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD. BETRAKTA EJ STRLEN

25、. Laser Radiation Point Fig. A CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. PROTECTION OF EYES FROM LASER BEAM DURING SERVICING This set employs a laser. Therefore, be sure to carefully follow the in

26、structions below when servicing. 1. Laser Diode Properties Material: GaAlAs Wavelength: 780-787 nm Emission Duration: Pulse Laser Output: Read mode 0.7mW (Continuous) Write mode max. 38mW (for 166ns, Min. Cycle 86.6ns) This output is the value measured at the lens of the Laser Pickup Unit. 2. When c

27、hecking the laser diode emission, keep your eyes more than 30 cm away from the objective lens. CDR-HD1300/CDR-HD1300E 4 CDR-HD1300/CDR-HD1300E I PREVENTION OF ELECTRO STATIC DISCHARGE Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are c

28、alled Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component damage caused by electro static discharge (E

29、SD). 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reason

30、s prior to applying power to the unit under test. 2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly. 3. Use only a grounded-tip soldering iron to sol

31、der or unsolder ES devices. 4. Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static (ESD protected)” can generate electrical charge sufficient to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges suf

32、ficient to damage ES devices. 6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive mater

33、ial). 7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. CAUTION: Be sure no power is applied to the chassis or circuit, and observe all other safe

34、ty precautions. 8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient to damage an ES device). Grou

35、nding for electrostatic breakdown prevention 1. Human body grounding: Use an anti static wrist strap to discharge the static electricity from your body. 2. Work table grounding: Put a grounded conductive material (sheet) or iron sheet on the area where the optical pickup is placed. Caution: The stat

36、ic electricity of your clothes will not be grounded through the wrist strap. So take care not to let your clothes touch the optical pickup. 1M Conductive material (sheet) or steel sheet Anti-static wrist strip CDR-HD1300/CDR-HD1300E 5 CDR-HD1300/CDR-HD1300E CDR-HD1300E I FRONT PANELS CDR-HD1300 I RE

37、AR PANELS CDR-HD1300 (U model) CDR-HD1300/CDR-HD1300E 6 CDR-HD1300/CDR-HD1300E CDR-HD1300 (A model) CDR-HD1300 (B, G models) CDR-HD1300 (J model) CDR-HD1300E (B, G models) CDR-HD1300/CDR-HD1300E 7 CDR-HD1300/CDR-HD1300E I REMOTE CONTROL PANEL 435 (17-1/8) 100 (3-15/16) 15.5 (5/8) 115.5 (4-9/16) 11.5

38、 (7/16) 8.3 (5/16) 394.7 (15-1/2) 414.5 (16-5/16) Unit : mm (inch) 単位: mm （） I SPECIFICATIONS / 参考仕様 GENERAL / 一般仕様 Model / . HDD / CD recorder Application disks / 対応. CDs, CD-Rs for AUDIO, CD- RWs for AUDIO HDD capacity / HDD容量 . 40GB (CDR-HD1300E) and up to 137GB by replacing Power supply / 電源電圧 U

39、 model .AC 120 V 60 Hz A model .AC 240 V 50 Hz B, G models .AC 230 V 50 Hz J model. AC 100 V 50/60 Hz Power consumption / 消費電力 U, A, B, G models . 37 W J model. 32 W Standby power consumption / 待機電力 . 0 W Operating temperature / 動作温度 . + 5 C to + 35 C Max. dimensions / 最大寸法 (W x H x D) . 435 x 115.5

40、 x 414.5 mm (17-1/8 x 4-9/16 x 16-5/16) (include legs, terminals and knobs) Weight / 質量 CDR-HD1300 with no HDD . 7.8 kg (17 lbs. 3 oz.) CDR-HD1300E with HDD . 8.4 kg (18 lbs. 8 oz.) Panel color / 色 Gold Color . G, J models Black Color . U, A, B, G models AUDIO PERFORMANCE / 性能 Output level / 出力 (1kH

41、z 0dB) . 2 0.5 Vrms Frequency characteristics / 周波数特性 (EIAJ) 5Hz to 20kHz. 0.5 dB Playback signal to noise ratio / 再生SN比 (EIAJ) .105 dB or more DIMENSIONS Playback dynamic range / 再生 (EIAJ) .99 dB or more Playback THD + noise / 再生歪率+雑音 (EIAJ) .0.004 % or less Recording signal to noise ratio / 録音SN比

42、(EIAJ) .92 dB or more Recording dynamic range / 録音 (EIAJ) .92 dB or more Recording THD + noise / 録音歪率+雑音 (EIAJ) .0.006 % or less INPUT/OUTPUT / 入出力仕様 LINE OUTPUT / 出力 Output level . 2 Vrms Output resistance .990 ohms LINE INPUT / 入力 Input sensitivity . 500 mVrms Input impedance . 24 k-ohms (REC LEVEL Max.) DIGITAL OUTPUT / 出力 Coaxial output level .