Yamaha-CRX330-cs-sm 维修电路原理图.pdf

《Yamaha-CRX330-cs-sm 维修电路原理图.pdf》由会员分享，可在线阅读，更多相关《Yamaha-CRX330-cs-sm 维修电路原理图.pdf（81页珍藏版）》请在收音机爱好者资料库上搜索。

1、CRX-330/NS-BP110/NS-BP100The MCR-330 consists of the CRX-330 and NS-BP110.The MCR-230 consists of the CRX-330 and NS-BP100.MCR-330 、CRX-330、NS-BP110 構成。MCR-230 、CRX-330、NS-BP100 構成。1 0 11 2 6SERVICE MANUALIMPORTANT NOTICEThis manual has been provided for the use of authorized YAMAHA Retailers and th

2、eir service personnel.It has been assumed that basic service procedures inherent to the industry, and more specifi cally YAMAHA Products, are already known and understood by the users, and have therefore not been restated.WARNING: Failure to follow appropriate service and safety procedures when serv

3、icing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specifi ed. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service r

4、epresentative.IMPORTANT: The presentation or sale of this manual to any individual or fi rm does not constitute authorization, certifi cation or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.The data provided is believed to be accurate

5、and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifi cations are subject to change without notice or obligation to retrofi t. Should

6、 any discrepancy appear to exist, please contact the distributors Service Division.WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to thi

7、s buss).IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. CONTENTSTO SERVICE PERSONNEL .24PREVENTION OF ELECTROSTATIC DISCHARGE .5SYSTEM COMPOSITION / 構成 .6FRONT PANELS .7REAR PANELS .810REMOTE CONTROL PANELS .11SPECIFICATIONS

8、/ 参考仕様 .1213INTERNAL VIEW .14DISASSEMBLY PROCEDURES / 分解手順 .1517UPDATING FIRMWARE / 書込 .1823SELF-DIAGNOSTIC FUNCTION / （自己診断機能） .2438DISPLAY DATA .39IC DATA .4046PIN CONNECTION DIAGRAMS .4748BLOCK DIAGRAM .49PRINTED CIRCUIT BOARDS .5055SCHEMATIC DIAGRAMS .5761REPLACEMENT PARTS LIST .6379REMOTE CONTR

9、OL .80animate 08.12P.O.Box 1, Hamamatsu, JapanCopyright 2008 All rights reserved.This manual is copyrighted by YAMAHA and may not be copied orredistributed either in print or electronically without permission.CD RECEIVER / SPEAKERSCRX-330/ NS-BP110/NS-BP100For U, T, K, A, G, L, V and J modelsThis se

10、rvice manual is for the CRX-330/NS-BP110/NS-BP100 (U, T, K, A, G, L, V and J models).For service manual of the CRX-330/NS-BP110 (B model), please refer to the following publication number:CRX-330/NS-BP110 (B model):101137MICRO COMPONENT SYSTEMMCR-330/MCR-230RadioFans.CN 收音机爱 好者资料库2CRX-330/NS-BP110/N

11、S-BP100CRX-330/NS-BP110/NS-BP100This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm.DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHATSOEVER!Avoid prolonged, unprotected contact

12、between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor!If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.1. Critical Components InformationComponents having special

13、 characteristics are marked and must be replaced with parts having specifications equal to those originally installed.2. Leakage Current Measurement (For 120V Models Only)When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supp

14、ly circuits. Meter impedance should be equivalent to 1500 ohms shunted by 0.15 F.本機搭載基板付接合部無鉛付。無鉛種類、修理時下記無鉛使用推奨。 Sn+Ag+Cu（錫 + 銀 + 銅） Sn+Cu（錫 + 銅） Sn+Zn+Bi（錫 + 亜鉛 + ）注意：無鉛融点温度通常鉛入比 30 40程度高、 合使用。All of the P.C.B.s installed in this unit and solder joints are soldered using the lead free solder.Among

15、some types of lead free solder currently available, it is recommended to use one of the following types for the repair work. Sn + Ag + Cu (tin + silver + copper) Sn + Cu (tin + copper) Sn + Zn + Bi (tin + zinc + bismuth)Caution:As the melting point temperature of the lead free solder is about 30C to

16、 40C (50F to 70F) higher than that of the lead solder, be sure to use a soldering iron suitable to each solder. TO SERVICE PERSONNEL Leakage current must not exceed 0.5mA. Be sure to test for leakage with the AC plug in both polari-ties.WALLOUTLETEQUIPMENTUNDER TESTAC LEAKAGETESTER OREQUIVALENTINSUL

17、ATINGTABLEWARNING: CHEMICAL CONTENT NOTICE!About lead free solder / 無鉛For U model“CAUTION”“F1: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 4A, 125V FUSE.”For C modelCAUTIONF1: REPLACE WITH SAME TYPE 4A, 125V FUSE.ATTENTIONF1: UTILISER UN FUSIBLE DE RECHANGE DE MME TYPE

18、 DE 4A, 125V.RadioFans.CN 收音机爱 好者资料库3CRX-330/NS-BP110/NS-BP100CRX-330/NS-BP110/NS-BP100CAUTIONDanger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type.WARNING: Lithium batteries注意正電池交換爆発起。同一型名同等品以外電池絶対交換。WARNING: Lithium batteries are dangerous because the

19、y can be exploded by improper handling. Observe the following precautions when handling or replacing lithium batteries. Leave lithium battery replacement to qualified service personnel. Always replace with batteries of the same type. When installing on the PC board by soldering, solder using the con

20、nection terminals provided on the battery cells. Never solder directly to the cells. Perform the soldering as quickly as possible. Never reverse the battery polarities when installing. Do not short the batteries. Do not attempt to recharge these batteries. Do not disassemble the batteries. Never hea

21、t batteries or throw them into fire.ADVARSEL!Lithiumbatteri Eksplosionsfare ved fejlagtig hndtering.Udskiftning m kun ske med batteri af samme fabrikat og type. Levr det brugte batteri tilbage til leverandren.VARNINGExplosionsfara vid felaktigt batteribyte. Anvnd samma batterityp eller an ekvivalent

22、 typ som rekommenderas av apparattillverkaren. Kassera anvnt batteri enligt fabrikan-tens instruktion.VAROITUSParisto voi rjht, jos se on virheellisesti asennettu.Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hvit kytetty peristo valmistajan ohjeiden mu-kaisesti.WARNING: Laser

23、SafetyThis product contains a laser beam component. This component may emit invisible, as well as visible radiation, which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must be used during servicing of the unit.1) When testing and/or repairing an

24、y component within the product, keep your eyes and skin more than 30 cm/1 feet away from the laser pick-up unit at all times. Do not stare at the laser beam at any time.2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere in this manual.3) CAUTION: Use of co

25、ntrols, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.Laser Emitting conditions:1) When the Top Cover is removed, and the STANDBY/ON SW is turned to the “ON” position, the laser component will emit a beam for several seconds to

26、detect if a disc is present. During this time (5-10 sec.) the laser may radiate through the lens of the laser pick-up unit. Do not attempt any servicing during this period!If no disc is detected, the laser will stop emitting the beam. When a disc is loaded, you will not be exposed to any laser emiss

27、ions.2) The laser power level can be adjusted with the VR on the pick-up PWB, however, this level has been set by the factory prior to shipping from the factory. Do not adjust this laser level control unless instruction is provided elsewhere in this manual. Adjustment of this control can increase th

28、e laser emission level from the device.Type: GaAlAsWave length: 780 nmLaser Output: max. 10 mWLaser Diode Properties4CRX-330/NS-BP110/NS-BP100CRX-330/NS-BP110/NS-BP100The primary side of the power supply carries live mains voltage when the player is connected to the mains even when the player is swi

29、tched off !This primary area is not shielded so it is possible to accidentally touch copper tracks and/or components when servicing the player.Service personnel have to take precautions to prevent touching this area or components in this area.Note:The screws on the DVD mechanism may never be touched

30、, removed or re-adjusted.Handle the DVD mechanism with care when the unit has to be exchanged!The DVD mechanism is very sensitive for dropping or giving shocks.Warning for power supply5CRX-330/NS-BP110/NS-BP100CRX-330/NS-BP110/NS-BP100Some semiconductor (solid state) devices can be damaged easily by

31、 static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip” components. The following techniques should be used to help reduce the incidence of com

32、ponent damage caused by electro static discharge (ESD).1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap,

33、which should be removed for potential shock reasons prior to applying power to the unit under test.2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.

34、3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.4. Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static (ESD protect-ed)” can generate electrical charge sufficient to damage ES devices.5. Do not use freon-propelled chemi

35、cals. These can generate electrical charges sufficient to damage ES devices.6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam

36、, aluminum foil or comparable conductive material).7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed.CAUTION: Be sure no power is applied to the ch

37、assis or circuit, and observe all other safety precautions.8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as brushing together of your fabric clothes or lifting of your foot from a carpeted floor can generate static electricity (ESD) suffi

38、cient to damage an ES device).Grounding for electrostatic breakdown prevention1. Human body grounding.Use the antistatic wrist strap to discharge the static electricity from your body.2. Work table grounding.Put a conductive material (sheet) or steel sheet on the area where the optical pickup is pla

39、ced and ground the sheet.Caution:The static electricity of your clothes will not be grounded through the wrist strap. So take care not to let your clothes touch the optical pickup. PREVENTION OF ELECTROSTATIC DISCHARGE1M-ohmsConductive material(sheet) or steel sheetAnti-static wrist strap6CRX-330/NS

40、-BP110/NS-BP100CRX-330/NS-BP110/NS-BP100 NS-BP110 NS-BP110MCR-330 NS-BP100 NS-BP100 CRX-330 CRX-330MCR-230The MCR-330 consists of the CRX-330 and NS-BP110.The MCR-230 consists of the CRX-330 and NS-BP100.MCR-330 、CRX-330、NS-BP110 構成。MCR-230 、CRX-330、NS-BP100 構成。 SYSTEM COMPOSITION / 構成7CRX-330/NS-BP

41、110/NS-BP100CRX-330/NS-BP110/NS-BP100 FRONT PANELSCRX-330NS-BP100NS-BP110Top viewFront view8CRX-330/NS-BP110/NS-BP100CRX-330/NS-BP110/NS-BP100 REAR PANELSU modelA modelT modelK modelCRX-330Bottom view9CRX-330/NS-BP110/NS-BP100CRX-330/NS-BP110/NS-BP100G modelL modelV modelJ model10CRX-330/NS-BP110/NS

42、-BP100CRX-330/NS-BP110/NS-BP100NS-BP100NS-BP110T modelU, K, A, G, L, V, J modelsT modelU, K, A, G, L, V, J models11CRX-330/NS-BP110/NS-BP100CRX-330/NS-BP110/NS-BP100U, T, K, A, G, L, V models REMOTE CONTROL PANELSJ model12CRX-330/NS-BP110/NS-BP100CRX-330/NS-BP110/NS-BP100 Audio Section / 部Minimum RM

43、S Output Power (Power Amp. Section) / 定格出力（部） (L/R drive, 1 kHz, 10 % THD, 6 ohms) .20 W + 20 WRated Output Voltage/Output Impedance / 出力電圧出力 SUBWOOFER . 2.0 V/47 k-ohmsHeadphone Jack Rated Output/Output Impedance / 出力出力 CD etc., 1 kHz, 150 mV . 0.6 V/32 ohmsFrequency Response / 再生周波数帯域 20 Hz to 20

44、kHz, CD etc. . 0 1.0 dBTotal Harmonic Distortion / 全高調波歪率 CD etc. to SP OUT, 1 kHz, 10 W/6 ohms .0.03 %Residual Noise / 残留 (IHF-A Network) .150 VTone Control Characteristics / 特性 BassBoost/Cut (50 Hz) . 14 dBTurnover frequency .350 HzTrebleBoost/Cut (20 kHz) . 14 dBTurnover frequency .3.5 kHz FM Sec

45、tion / FM 部Tuning Range / 受信周波数範囲 U model .87.5 to 107.9 MHzT, K, G, L, V models (step variable) .87.50 to 108.00 MHzA model .87.50 to 108.00 MHzJ model .76.00 to 90.00 MHzAntenna Input / 入力 . 75 ohms unbalanced General / 総合Power Supply / 電源電圧 U model .AC 120 V, 60 HzT model .AC 220 V, 50 HzK model

46、.AC 220 V, 60 HzA model .AC 240 V, 50 HzG model .AC 230 V, 50 HzL model .AC 220-240 V, 50/60 HzV model .AC 110-120 V, 60 HzJ model .AC 100 V, 50/60 HzPower Consumption / 消費電力 .25 WStandby Power Consumption (reference data) / 待機時消費電力 ( 参考値 )ECO MODE ON .1 W or lessMaximum Power Consumption / 最大消費電力 (

47、1 kHz, 6 ohms, 10 % THD) .20 WDimensions (W x H x D) / 寸法（幅 高 奥行） .180 x 117 x 303 mm (7-1/8 x 4-5/8 x 11-15/16)Weight / 質量 . 3.1 kg (6 lbs. 13 oz.)Finish / 仕上 Black color .U, T, K, A, G, L, V, J modelsSilver color .U, T, K, A, G, L, V, J modelsAccessories / 付属品Remote control .x 1Lithium battery (CR

48、2025) .x 1Indoor FM antenna (1.4 m) .x 1USB cap .x 1DOCK cover .x 1 SPECIFICATIONS / 参考仕様U .U.S.A. modelT.Chinese modelK .Korean modelA .Australian modelG .European modelL.Singapore modelV . Taiwan modelJ .Japanese modelCRX-330 Audio Section / 部Type / 形式 .2-way bass reflex speaker systemNon-magnetic

49、 shielding type 2 非防磁型Driver / Woofer .10 cm (4) cone typeTweeter .2.5 cm (1) balanced dome typeFrequency Response / 再生周波数帯域 .60 Hz to 50 kHz (-10dB)to 100 kHz (-30 dB) Impedance / .6 ohmsNominal Input / 許容入力 .30 WMaximum Input / 最大入力 .90 WSensitivity / 出力音圧 .84 dB / 2.83 V/mCrossover Frequency / 周波

50、数 .8 kHzInput Terminal / 入力端子 NS-BP110 .Screw/Banana typeNS-BP100 . Push typeDimensions (W x H x D) / 寸法（幅 高 奥行）NS-BP110 .123 x 192 x 296 mm (4-13/16 x 7-9/16 x 11-5/8)NS-BP100 .123 x 192 x 294 mm (4-13/16 x 7-9/16 x 11-9/16)Weight / 質量 NS-BP110 . 2.3 kg (5 lbs. 1 oz.)NS-BP100 . 2.1 kg (4 lbs. 10 oz