HarmanKardon-FL8380-cd-sm维修电路原理图.pdf

《HarmanKardon-FL8380-cd-sm维修电路原理图.pdf》由会员分享，可在线阅读，更多相关《HarmanKardon-FL8380-cd-sm维修电路原理图.pdf（72页珍藏版）》请在收音机爱好者资料库上搜索。

1、 harman/kardon Model FL8380 5 Disc Compact Disc Changer SERVICE MANUAL CONTENTS LASER BEAM SAFETY PRECAUTIONS .2 OTHER PRECAUTIONS . 3 SPECIFICATIONS . 4 FRONT PANEL CONTROLS. . . 6 REAR PANEL CONNECTIONS. 7 REMOTE CONTROL FUNCTIONS.8 INSTALLATION/CONNECTIONS.10 OPERATION. 11 BASIC TROUBLESHOOTING .

2、 . 13 TEST PROCEDURE. 14 CIRCUIT DESCRIPTION. . . 17 BLOCK DIAGRAM .21 GENERAL UNIT EXPLODED VIEW I, II . .22 TECH TIP HKTT2003-06 26 DETAILED TROUBLESHOOTING 27 SEMICONDUCTOR IDENTIFICATION. 33 PRINTED ClRCUlT BOARDS . . 59 ELECTRICAL PARTS LIST . 61 MECHANICAL PARTS LIST . 63 SCHEMATIC DIAGRAMS. 6

3、8 PACKAGE .72 harman/kardon, Inc. 250 Crossways Park Dr. Woodbury, New York 11797 Rev1 11/2003 RadioFans.CN 收音机爱 好者资料库LASER BEAM SAFETY PRECAUTIONSCLASS 1 LASER PRODUCTCAUTIONInvisible laser radiation when the unit is open.Do not stare into beam.CAUTION: USE OF ANY CONTROLS, ADJUSTMENT, ORPROCEDURES

4、 OTHER THAN THOSE SPECIFIED HEREINMAY RESULT IN HAZARDOUS RADIATION EXPOSURE.Do not look directly at the laser beamcoming from the pickup or allow it tostrike against your skin.This compact disc player uses a pickup that emits a laser beam. The laser beam is emitted from thelocation shown in the fig

5、ure. When checking the laser diode, be sure to keep your eyes at least 1 foot awayfrom the pickup lens when the diode is turned on. Do not look directly at the laser beam.CAUTION:Using controls and adjustment, or doing procedures other than those specified herein, may result inhazardous radiation ex

6、posure.2FL8380RadioFans.CN 收音机爱 好者资料库SAFETY PRECAUTIONSThis symbol is intended to alert the user tothe presence of uninsulated dangerousvoltage within the products enclosure thatmay be of sufficient magnitude to consti-tute a risk of electric shock to persons.This symbol is intended to alert the use

7、r tothe presence of important operating andmaintenance (servicing) instructions in theliterature accompanying the appliance.Caution:To prevent electric shock do not use this(polarized) plug with an extension cord, recep-tacle or other outlet unless the blades can befully inserted to prevent blade ex

8、posure.Attention: Pour prevenir les chocs electriques ne pasutiliser cetre fiche polarisee avec unprolongateur, une prise de courant ou une au-tre sortie de courant, sauf si les lames preventetre inserees a fond-sans en laisser aucunepartie a decouvert.HANDLING LASER PICKUPThe laser diode in the opt

9、ical system of this player can be damaged by electrostatic discharge fromyour clothes or your body. Proper electrostatic grounding for service personal is required during servicing.BEFORE REPAIRING THE COMPACT DISC PLAYERPreparationHuman Body Grounding:Many of the components used in this compact dis

10、c player, including the laser pickup, are sensitive toelectrostatic discharge. Service personal should be grounded with an electrostatic armband (1 Mohm).Caution:Static charge on clothing does not escape through a body grounding wrist band.Be careful not to contact the pickup or electrical component

11、s with your clothing.Workbench and Tool Grounding:A properly-grounded electroconductive plate (1Mohm) or metal sheet should be fitted to the workbenchsurface. Tools and instruments (such as soldering irons and scopes) should be grounded to prevent ACleakage.Note: Laser diodes are so susceptible to d

12、amage from static electricity that, even if a static discharge doesnot ruin a diode, it can shorten its life or cause it to work improperly.WARNINGTo prevent fire or shock hazard, do notexpose the unit to rain or moisture.3FL83804Technical SpecificationsSignal FormatSampling Frequency44.1kHzHDCD Pro

13、cessingBurr-Brown PCM1732D/A ConversionDual 18-Bit Oversampling8 TimesDiscrete Analog Output SectionError CorrectionCIRC SystemFrequency Response20Hz 20kHz +0, 1dBTotal Harmonic Distortion (THD)97dBSignal-to-Noise Ratio97dBChannel Separation80dBLine-Level Output1.0V RMSDigital OutputCoaxGeneralPower

14、 Requirement120V/60HzPower Consumption20 WattsDimensionsHeight5.1 (129mm)Width17.3 (440mm) Depth15.2 (386mm) Weight16.7 lbs (7.6kg)Depth measurement includes knobs and buttons.Height measurement includes feet and chassis.All features and specifications are subject to change without notice.Harman Kar

15、don is a registered trademark, and Power for the digital revolution is a trademark, of Harman Kardon, Inc., HDCD, High Definition Compatible Digitaland Pacific Microsonicsare either registered trademarks or trade-marks of Pacific Microsonics, Inc., in the United States and/or other countries. HDCD s

16、ystem manufactured under license fromPacific Microsonics, Inc.This product is covered by one or more of the following: In the USA: 5,479,168; 5,638,074; 5,640,161;5,808,574; 5,838,274; 5,854,600; 5,864,311; 5,872,531; and in Australia: 669114. Other patents pending.FL8380GENERAL INFORMATION 1. Power

17、 ConsumptionOperating 18W; Standby 5W 2. Power Super230V AC 50Hz or 120V AC60Hz 3. Dimensions440 x 130 x 386mm 4. Product OutlookRefer to attached diagram 5. Remote Unit harman/kardon remote code 6. Compliance Requirement i EMC EN55013, EN61000-3-2, EN61000-3-3, EN55022ii. CE (LVD EN60065) iii. NRTL

18、/C iv. HDCD 7. Disc Changer Mechanism5 disc carousel; Play 1 change 4 8. Sound ProcessorHDCD 9. CD Servo SystemDigital Servo, Auto AlignmentAUDIO SPECIFICATIONTypical LimitOutput Level 1KHz 0dB (no HDCD)1.0 Vrms+-1dBOutput Level 1KHz 0dB (HDCD output)2.0Vrms +- 2dBFrequency Response 20Hz20KHz refere

19、nce+0-1dB+0.5-1.5dBTHD 1KHz 0dB (30KHz Filter)0.01%0.05%THD 1KHz 0dB (no any filter)0.03%0.08%THD 20Hz20KHz 0dB (30KHz Filter)0.04%0.05%S/N 1KHz 0dB A-weighted (A Filter)97dB93dBDynamic Range95dB90dBChannel Separation 1KHz 0dB(30KHz Filter)85dB80dBChannel Balance+-0.5dB+-1.5dBDe-emphasis (5KHz,16KHz

20、)+-0.5dB+-1.5dBHeadphone output specification under 32 ohm loadMaximum Headphone Output Level 1KHz 0dB1.5Vp-p+-0.2VFrequency Response (2020KHz)+-1dB+-1.5dBTHD 2020KHz 0dB (30KHz Filter)0.1%0.2%FL8380561 Power Switch: Press this switch to applypower to the FL 8380.When the FL 8380 isfirst turned on b

21、y pressing this switch, theStatus Mode Indicator 2 will turn green,and the Information Display # will light.Press the switch again to turn the unit off; theStatus Mode Indicator 2 will turn amber,indicating that the unit is in a Standby mode.When the FL 8380 is connected to a switchedAC outlet, such

22、 as those found on the back ofmany audio products, it will return to theStandby mode when power is applied to theswitched outlet without any further press of theswitch.2 Status Mode Indicator: When the FL 8380 is in the On mode, this indicator willglow green.When the unit is off, the indicatorwill g

23、low amber, indicating that the unit is stillconnected to the AC main supply.3 Headphones Jack: Connect a set of stan-dard headphones to this jack for private listening.4 Headphones Level Control:Turn thisknob to increase or decrease the volume levelfor headphones connected to the FL 8380sHeadphones

24、Jack 3. Note that changing thislevel will not change the sound level for theunits main output, as that remains constant.5 CD Drawer: This drawer holds the discsthat will be played. Press the Open/Close but-ton 6 to open the drawer so that discs maybe inserted.6 Open/Close Button: Press this button t

25、oopen or close the disc drawer. DO NOT push thedrawer to close it or damage to the transportmechanism may result.7 Search Button: Press one side of this but-ton to search forward or the other sideof the button to search backwards through a disc to locate a particular portion ofthe disc being played.

26、8 Skip Button: Press one side of this buttonto move to the next track or the otherside of the button to move back to the previoustrack fifion the disc being played.9 Stop Button: Press this button to stop thedisc currently being played. (See page 11 formore information.) Play/Pause Button: Press thi

27、s button tostart the playback of a CD. If the CD drawer isopen, pressing this button will automaticallyclose the drawer. Press this button once duringplay to momentarily pause a disc.When thebutton is pressed again, the disc will resumeplay at the point it was paused.! Disc Skip Button: Press this b

28、utton tochange to the next disc. If a disc position isempty, the FL 8380 will automatically search forthe next position that contains a disc. Disc Select Buttons: Press one of thesebuttons to select the disc in a specific positionin the CD drawer.# Information Display: This display provides details

29、about the operation of the FL 8380.$ Remote Sensor: The sensor behind thiswindow receives commands from the remotecontrol. Keep this area clear if you wish to usethe FL 8380 with a remote control.Front Panel Controls23 45789)!#$61FL 8380PowerPhonesPhones LevelPLAY/PAUSE12345DISK SKIPSTOPSEARCHSKIP?1

30、 Power Switch2 Status Mode Indicator3 Headphones Jack4 Headphones Level Control5 CD Drawer6 Open/Close Button7 Search Button8 Skip Button9 Stop Button) Play/Pause Button! Disc Skip Button Disc Select Button# Information Display$ Remote SensorFL8380Rear Panel ConnectionsDIGITALOUTPUTAUDIOOUTPUTLEFTRI

31、GHTREMOTEINOUTSERIAL NO.AC INPUTAC 117V / 60Hz20WMODEL NO.: FL 8380HARMAN KARDONNORTHRIDGECALIFORNIA, U.S.A.MADE IN CHINAPRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J.APPLICABLE AT DATE MANUFACTURED: SHOCK HAZARD: DO NOT OPENWARNING: TO REDUCE THE RISK OF FIRE ORELECTRIC SHOCK, DO NOT EXPOSE

32、THIS APPLIANCETO RAIN OR MOISTURE.This device complies with part 1.5 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and, (2) this device must accept any interferencereceived, including interference that may causeundesired ope

33、ration.HDCD and High Definition Compatible Digitalare registered trademarks of Pacific Microsonics, Inc.AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIRCAUTIONCAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENCLASS 1 LASER PRODUCTLR46800CAN/CSA-C22.2 No. 1-98UL 1270? AC Power Cord: Connect this plug to anAC ou

34、tlet. If the outlet is switch-controlled, makecertain that the switch is in the ON position. Coaxial Digital Output: Connect this jack to the coaxial-digital input of a digitalaudio/video receiver or an external digital-to-analog converter for direct access to the digitalsignals of the FL 8380.DO NO

35、T connect this jackto the standard audio inputs of any device. Remote Control Output: Connect this jack to the input of another compatibleHarman Kardon remote controlled device tohave the remote sensor on the FL 8380 providesignals to other products. Remote Control Input: Connect the output of a rem

36、ote infrared sensor or theremote control output of another compatibleHarman Kardon product.This will enable theremote control system to operate even when thefront panel Remote Sensor $ is blocked. Itwill also allow use of the FL 8380 with optional,external control systems. Analog Audio Outputs: Conn

37、ect thesejacks to the analog CD audio inputs of yourreceiver, surround processor or preamplifier.7 AC Power Cord Coaxial Digital Output Remote Control Output Remote Control Input Analog Audio OutputsFL83808FL 8380SKIPSEARCHRANDOMPROGRAMTIMEINTROREPEAT+DISC NO.045632134521789CLEARTRACK NO.bcadefghijk

38、lmnnnnnnnonnnnnnDISCSKIPPOWEROFFONpa Disc-Select Buttonsb Numeric Buttonsc Clear Buttond Search Buttonse Skip Buttonsf Stop Buttong Play Buttonh Random Buttoni Pause Buttonj Program Buttonk Time Buttonl Intro Buttonm Repeat Buttonn Disc Skip Buttonso Power On Buttonp Power Off ButtonRemote Control F

39、unctionsFL83809Remote Control Functionsa Disc-Select Buttons: Press one of thesebuttons to select the disc in a specific positionin the CD drawer.b Numeric Buttons: Press these buttons toselect a specific track on a disc.The FL 8380will immediately go to the track and begin toplay it.These buttons a

40、re also used to entertrack numbers into the memory for prepro-grammed-play lists. (See page 13 for completeinformation on programming the FL 8380.)c Clear Button: Press this button toremove tracks from a programmed sequence.Each press of the button will remove one track,starting with the last track

41、programmed to play.(See page 13 for complete information on pro-gramming the FL 8380.)d Search Buttons: Press these buttons to search forward or backwards through a disc to locate a particular portion ofthe selection being played.e Skip Buttons: Press one of these buttonsto move to the next track or

42、 to move backto the previous track on the disc beingplayed.f Stop Button: Press this button to stop thedisc currently being played.g Play Button: Press this button to startthe playback of a CD. If the CD drawer is open,pressing this button will automatically close thedrawer.h Random Button: Press th

43、is button toplay all of the tracks on a disc in a randomorder. (See page 11 for more information.)i Pause Button: Press this button once tomomentarily pause a disc.When the button ispressed again, the disc will resume play from thepoint at which it was paused.j Program Button: This button is used to

44、program the playback of a disc in a particularorder. (See page 13 for complete instructions onprogramming the FL 8380.)k Time Button: In normal operation, thedisplay will show the running time of the trackbeing played. Press the button once to checkthe time remaining for the track in play. Pressthe

45、button again to view the total play timeremaining for the disc in play.l Intro Button: Press this button to put theFL 8380 into the Intro Scan mode.When youpress this button,the unit will play the first 10seconds of each track on the disc,and then moveto the next track.Press the button again to defe

46、atthe function and continue full play of the currenttrack.(See page 12 for more information.)m Repeat Button: Press this button once tocontinuously repeat the track currently beingplayed.Press it a second time to repeat the entiredisc.(See page 13 for more information.)n Disc Skip Buttons: Press the

47、se buttons tochange to the next disc.If a disc position is empty,the FL 8380 will automatically search for the nextposition that contains a disc.o Power On Button: When the FL 8380 isplugged into an active AC outlet,press this buttonto turn the unit on.The Status Mode Indicator2will turn green.If th

48、e unit is plugged into aswitched outlet,power must be applied to theswitched outlet in order for the Power On buttono to be effective.p Power Off Button: Press this button toturn the unit off;the Status Mode Indicator2will turn amber,indicating that the unit is in aStandby mode.FL83801 0To prevent p

49、ossible damage to your speakersand other components in your audio system, itis important that ALL components, including theFL 8380 and your receiver or preamp andamplifiers, are turned off and unplugged fromtheir AC power source when installing any newcomponent.Connecting the FL 8380 to your audio s

50、ystem issimple. Using standard RCA-to-RCA intercon-nect cords, connect the left and right AudioOutput jacks on the rear panel to the CDinput jacks on your receiver, surround processoror preamplifier.If your system includes an optional external digital-to-analog converter, or if you are using areceiv