RCA-RP7954A-pr-sm 维修电路原理图.pdf
《RCA-RP7954A-pr-sm 维修电路原理图.pdf》由会员分享,可在线阅读,更多相关《RCA-RP7954A-pr-sm 维修电路原理图.pdf(7页珍藏版)》请在收音机爱好者资料库上搜索。
1、RP7954AFEB/99RP7954AAudio/CommunicationLatin America After Sales Indianapolis IN 46290 U.S.A.SERVICE DATA INDEXUSE ISOLATION TRANSFORMER WHEN SERVICINGSAFETY NOTICEComponents having special safety characteristics are identified by a ( ) on schematics and on the parts list in this Service Data and it
2、s bulletins.Before servicing this instrument, it is important that the service technician read and follow the Safety Precautions in the Basic Service Data.RP7954ABasic Service DataFirst Edition - First PrintingCopyright 1999 - Thomson Consumer Electronics, Inc.Printed in U.S.A. - Trademark(s)fi Regi
3、stered - Marca(s) Registrada(s)PageNumberExploded View.1-6Replacement Parts .1-3Safety Precautions .1-2Schematic .1-7CAUTION: Modification or repair of this unit by unauthorized persons is a direct violation of FCC Rules Part 68.216 and couldresult in risk of electric shock. You are urged to contact
4、 a qualified factory authorized service facility for repairs.RadioFans.CN 收音机爱 好者资料库SAFETY PRECAUTIONS1. Before returning the instrument to the customer, always make asafety check of the entire instrument, including, but not limited to, thefollowing items:a. Be sure that no built-in protective devic
5、es are defective and/orhave been defeated during servicing. (1) Protective shields areprovided on this instrument to protect both the technician and thecustomer. Correctly replace all missing protective shields, includingany removed for servicing convenience. (2) When reassemblingthe instrument, be
6、sure to put back in place all protective devices,including, but not limited to, nonmetallic control knobs, insulatingfishpapers, adjustment and compartment covers/shields, andisolation resistor/capacitor networks. Do not operate thisinstrument or permit it to be operated without all protectivedevice
7、s correctly installed and functioning. Servicers whodefeat safety features or fail to perform safety checks may beliable for any resulting damage, and may expose themselvesand others to possible injury.b. Be sure that there are no cabinet openings through which an adultor child might be able to inse
8、rt their fingers and contact ahazardous voltage. Such openings include, but are not limited to,(1) excessively wide cabinet ventilation slots, and (2) improperlyfitted and/or incorrectly secured cabinet covers.c. Leakage Cold Check - With the instrument AC plug removedfrom any AC source, connect an
9、electrical jumper across the twoAC plug prongs. Place the instrument AC switch in the onposition. Connect one lead of an ohmmeter to the AC plug prongstied together and touch the other ohmmeter lead in turn to eachpush button/customer control, exposed metal screws, metallizedoverlays and to each cab
10、le connector. If the measured resistanceis less than 1.0 megohm or greater than 5.2 megohm an abnormalityexists that must be corrected before the instrument is returned tothe customer. Repeat this test with the AC switch in the offposition.d. Leakage Current Hot CheckOn completely assembled instrume
11、nt, plug the AC line corddirectly into a 120V AC outlet. (Do not use an isolation transformerduring this test.) Use a leakage current tester or a metering systemthat complies with American National Standards Institute (ANSI)C101.1 Leakage Current for Appliances and UnderwritersLaboratories (UL) 1492
12、 (Section 67). Measure for current from aknown earth ground (metal waterpipe, conduit, etc.) to all exposedmetal or conductive parts of the instrument (antenna connections,handle bracket, metal cabinet, screwheads, metallic overlays,push-buttons, control shafts, etc.), especially any exposed metalpa
13、rts that offer an electrical return path to the chassis. Any currentmeasured must not exceed 0.5 milliamp. Reverse the instrumentpower cord plug in the outlet and repeat the test.ANY MEASUREMENTS NOT WITHIN THE LIMITSSPECIFIED HEREIN INDICATE A POTENTIAL SHOCKHAZARD THAT MUST BE ELIMINATED BEFORERET
14、URNING THE INSTRUMENT TO THE CUSTOMEROR BEFORE CONNECTING TO ANTENNA ORACCESSORIES.e. Interconnected Equipment AC Leakage TestAvoid shock hazards. The instrument, accessory, or cable(s) towhich this instrument is connected should have the applicablesections of the leakage resistance cold check and t
15、he leakagecurrent hot check performed. Do not connect this instrument to anantenna, cable or accessory that exhibits excessive leakage currents.2. Read and comply with all caution and safety-related notes on or insidethe instrument cabinet, and on the chassis.3. Design Alteration Warning - Do not al
16、ter or add to the mechanical orelectrical design of this instrument. Design alterations and additions,including, but not limited to, circuit modifications and the addition ofitems such as auxiliary audio output connections, cables and accessories,etc., might alter the safety characteristics of this
17、instrument and createa hazard to the user. Any design alterations or additions will void themanufacturers warranty and will make you, the servicer responsiblefor personal injury or property damage resulting therefrom.4. Observe original lead dress. Take extra care to assure correct lead dressin the
18、following areas: (a) near sharp edges, (b) near thermally hot parts- be sure that leads and components do not touch thermally hot parts,and (c) the AC supply. Always inspect in all areas for pinched, out-of-place, or frayed wiring. Do not change spacing between componentsand the printed-circuit boar
19、d. Check AC power cord for damage.5. Components, parts and/or wiring that appear to have overheated or areotherwise damaged should be replaced with components, parts orwiring that meet original specifications. Additionally, determine thecause of overheating and/or damage and, if necessary, take corr
20、ectiveaction to remove any potential safety hazard.6. PRODUCT SAFETY NOTICE - Many electrical and mechanicalparts have special safety-related characteristics, some of which areoften not evident from visual inspection, nor can the protection theygive be obtained by replacing them with components rate
21、d for highervoltage, wattage, etc. Parts that have special safety characteristics areidentified in this service data by a (|) on schematics and in the parts list.Use of a substitute replacement that does not have the same safetycharacteristics as the recommended replacement part in this servicedata
22、parts list might create shock, fire and/or other hazards. ProductSafety is under review continuously and new instructions are issuedwhenever appropriate. For the latest information, always consult theappropriate current service literature.1-2RadioFans.CN 收音机爱 好者资料库RP7954A EXPLODED VIEWPage 1-6RP7954
23、A EXPLODED VIEWBEFORE REPLACING PARTS, READ THE FOLLOWING:REPLACEMENT PARTSWarranty Status of Assemblies and Parts - All assemblies and components shown in this part list are eligible for warranty exchange or replacement except those with a dot shown to the left of the Description. Assemblies and co
24、mponents with a dot to the left of the Description are NOT eligible for warranty exchange or replacement.Warranty replacement of cabinet parts requires the approval of a Thomson Consumer Electronics Field Service Manager.Warranty Status and Specifications of assemblies and components are subject to
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- RCA-RP7954A-pr-sm 维修电路原理图 RCA RP7954A pr sm 维修 电路 原理图