Gemini-PMX350-mix-sm维修电路原理图.pdf
《Gemini-PMX350-mix-sm维修电路原理图.pdf》由会员分享,可在线阅读,更多相关《Gemini-PMX350-mix-sm维修电路原理图.pdf(6页珍藏版)》请在收音机爱好者资料库上搜索。
1、Page 1SERVICE MANUALPMX-350Professional MixerGemini Sound Products Corp.120 Clover Place P.O. Box 6928Edison, NJ 08818-6928732-738-9003 (Phone) 732-738-9006 (Fax)CONTENTS:Connections & Operations:.Page 2-3Specifications:.Page 3Parts Lists:.Page 4PCBs:.Page 5Schematics.Page 6RadioFans.CN 收音机爱 好者资料库Pa
2、ge 22112365416978101311131213191714181920152621222123242725RadioFans.CN 收音机爱 好者资料库Page 3IntroductionCongratulations on purchasing a Gemini model PMX -350 mixer. This-state-of-the-art mixer includes the latest features and is backed by athree year warranty, excluding crossfader and channel slides. Pr
3、ior touse, we suggest that you carefully read all the instructions.Features2 Phono/Line Convertible, 1 Phono, 1 Line and 1 Mic inputGain controls for each channelRemovable CrossfaderCue SectionCautions1. All operating instructions should be read before using this equipment.2. To reduce the risk of e
4、lectrical shock, do not open the unit. There areNO USER REPLACEABLE PARTS INSIDE. Please refer servicing to aqualified service technician.3. Do not expose this unit to direct sunlight or to a heat source such as aradiator or stove.4. This unit should be cleaned only with a damp cloth. Avoid solvents
5、 orother cleaning detergents.5. When moving this equipment, it should be placed in its original cartonand packaging. This will reduce the risk of damage during transit.6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.7. DO NOT USE SPRAY CLEANERS OR LUBRICANTS ON CONTROLSOR SWITCHES.Connections1. Make
6、sure that the POWER (22) switch is in the off position.2. This unit comes supplied with a 15 volt AC adaptor. Plug the male pinof the adaptor into the rear panel POWER JACK (6). Then plug theadaptor into a proper power source.3. To connect the mixer to your amplifier, use the MASTER (1) jacks onthe
7、rear panel.4. The unit is equipped with one microphone input. The MIC JACK (15)is a 1/4 (6.35 mm) and is located on the front panel.5. On the rear panel are 2 stereo PHONO/LINE (3, 4) inputs, 1 stereoPHONO (5) input and 1 stereo LINE (2) input. The PHONO/LINESWITCHES (8, 9) enable you to set the (3,
8、 4) inputs to Phono or Line.The PHONO (5) input will accept turntable inputs only. A GROUND (7)screw for you to ground your turntables is located on the rear panel.The stereo LINE (2) input will accept any line level input such as a CDplayer or a cassette player.6. Headphones can be plugged into the
9、 front panel mountedHEADPHONE (26) jack.Operation1. POWER ON: Once you have made all the equipment connections toyour mixer, press the POWER (22) switch. The power will turn on andthe POWER LED (21) will glow RED.2. CHANNEL 1: The GAIN (12) control allows you to individually adjustthe gain of Channe
10、l 1. Switch (13) allows you to select PHONO 1 (5)or the LINE 1/PHONO 2 (4) inputs. CHANNEL SLIDE (14) controls theinput level of this channel.3. CHANNEL 2: The GAIN (23) control allows you to individually adjustthe gain of Channel 2. Switch (24) allows you to select the LINE 2/PHONO 3 (3) or the LIN
11、E 3 (2) input. The CHANNEL SLIDE (25)controls the input level of this channel.4. CROSSFADER SECTION: The CROSSFADER (20) allows the mixing ofone source into another. The left side of the CROSSFADER isCHANNEL 1 and the right side is CHANNEL 2. The CROSSFADER inyour unit is removable and, should the n
12、eed arise, can be easilyreplaced. Crossfader units are available in two varieties: part RF-45(which is identical to the crossfader supplied with this mixer) has a45 mm travel from side-to-side, while the PSF-45 is equipped with aspecial “curve” designed for scratch mixing.To install a new crossfader
13、:1. Unscrew the outside FADER plate screws (B). Do nottouch the INSIDE SCREWS (C).2. Carefully lift the fader and unplug the CABLE (D).3. Plug the new fader into the cable and place it back in themixer.4. Screw the fader to the mixer.5. TALKOVER SECTION: The purpose of the talkover section is to all
14、owthe program playing to be muted so that the mic can be heard abovethe music. When the TALKOVER (11) button is pushed, theTALKOVER INDICATOR (10) will glow and the volume of all sourcesexcept MIC are reduced by -16 dB. MIC (17) controls the level of thetalkover MIC.6. CUE SECTION: By connecting a s
15、et of headphones (26), you canmonitor either Channel 1 or Channel 2. Select Channel 1 by movingthe CUE SWITCH (19) to the left. Move to the right for Channel 2.Use the CUE (18) control to adjust the headphone volume withoutaffecting the overall mix.7. DISPLAY: The DISPLAY (16) indicates the MASTER o
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Gemini PMX350 mix sm 维修 电路 原理图