Gemini-BPM1-abc-sm维修电路原理图.pdf
《Gemini-BPM1-abc-sm维修电路原理图.pdf》由会员分享,可在线阅读,更多相关《Gemini-BPM1-abc-sm维修电路原理图.pdf(11页珍藏版)》请在收音机爱好者资料库上搜索。
1、Page 1SERVICE MANUALBPM-1PROFESSIONAL AUTOMATIC BEAT COUNTERCONTENTS:Connections & Operations:.Page 2-3Specifications:.Page 3Parts Lists:.Page 3-4PCBs:.Page 5-6Schematics:.Page 7Gemini Sound Products Corp.120 Clover Place P.O. Box 6928Edison, NJ 08818-6928732-738-9003 (Phone) 732-738-9006 (Fax)Radio
2、Fans.CN 收音机爱 好者资料库Page 21718212019211235445687789111010111213141615RadioFans.CN 收音机爱 好者资料库Page 3Connections1. Make sure that the POWER (13) switch is in the off position. ThePOWER LED (14) will be off. This unit comes supplied with a 15 voltAC adaptor. Plug the adaptor into the rear panel power jack
3、. Then plugthe adaptor into a proper power source.2. Use the 4 stereo PHONO/LINE (2, 5, 8, 11) inputs on the rear panel toconnect to the output of your sources. The PH1/LN1 (12) switchenables you to set the CHANNEL 1 (11) input sensitivity to Phono orLine. The PH2/LN2 (9) switch enables you to set t
4、he CHANNEL 2 (8)input sensitivity to Phono or Line. The PH3/LN3 (6) switch enables youto set the CHANNEL 3 (5) input sensitivity to Phono or Line. The PH4/LN4 (3) switch enables you to set the CHANNEL 4 (2) input sensitivityto Phono or Line. Note: When using turntables, dont forget to connectthe gro
5、und wire from your tuntable to the ground screw of your mixer.3. The BPM-1 is supplied with 4 sets of OUTPUT (1, 4, 7, 10) jacks. If youare using a turntable and have the input set to phono, thecorresponding output must be connected to phono inputs on yourmixer. If you have the input set to line, th
6、e corresponding output mustbe connected to line inputs on your mixer. Use the CHANNEL 1OUTPUT (10) jacks to connect to the appropriate inputs on your mixer.Use the CHANNEL 2 OUTPUT (7) jacks to connect to the appropriateinputs on your mixer. Use the CHANNEL 3 OUTPUT (4) jacks toconnect to the approp
7、riate inputs on your mixer. Use the CHANNEL 4OUTPUT (1) jacks to connect to the appropriate inputs on your mixer.Operation1. POWER ON: Once you have made all the equipment connections, pressPOWER (13). The power will turn on and the POWER LED (14) willglow RED. When you turn on the BPM-1, the unit w
8、ill run through aninitialization period in which the BPM DISPLAYS (17, 19) and the BEATOFFSET INDICATORS (18) will flash. When the flashing stops, the unitis ready for use.2. The ASSIGN (16, 21) buttons allow you to select which channel will bedisplayed on each side of the BPM-1. Press the ASSIGN (1
9、6) button toselect channel 1, 2, 3 or 4 to be displayed on the left BPM DISPLAY(17). The ASSIGN LED (15) will indicate the channel you selected.Press the ASSIGN (21) button to select channel 1, 2, 3 or 4 to bedisplayed on the right BPM DISPLAY (19). The ASSIGN LED (20) willindicate the channel you s
10、elected.3. BPM DISPLAY: There are BPM DISPLAYS (17, 19) for each side of theBPM-1. They update approximately every 2.5 seconds and digitallydisplay the Beats Per Minute allowing you to match the beats visually.BPM DISPLAY (17) reflects the Beats Per Minute of the channelassigned to the left side of
11、the unit, and BPM DISPLAY (19) reflectsthe Beats Per Minute of the channel assigned to the right side of theunit.NONONONONOTETETETETE: A - - reading will appear on the BPM DISPLAY if thetrack has unclear beats. The - - reading will also appear ifthere is no signal present.4. The BEAT OFFSET INDICATO
12、RS (18) light when the tracks of the twochannels assigned to the crossfader are within 11 BPMs of each otherand display how aligned the beats of the two channels are. When theRED LEDs light, the beats are not aligned. When the YELLOW LEDslight, the beats are almost aligned. When the GREEN LED lights
13、, thebeats are aligned perfectly.NONONONONOTETETETETE: If the difference between the two channels beatsexceed 11 BPM, the BEAT OFFSET INDICATORS will notlight.SUGGESTION: You can use the BPM DISPLAYS to determine whichtracks have similar or the same Beats Per Minute. When mixing two trackswith simil
14、ar Beats Per Minute, you can use one sources pitch control toalign the Beats Per Minute with the other sources BPM. The BPMDISPLAYS and the BEAT OFFSET INDICATORS update every 2.5seconds and will reflect the change in BPM and indicate when the beatsare aligned.NONONONONOTETETETETE: Beat mixing is a
15、skill that requires practice. Notevery track has a strong beat, and beat mixing works bestwith tracks that have clear and strong beats.SpecificationsINPUTS:Phono.3 mV 3 MOhmLine.150 mV 3 MOhmOUTPUTS:Input/Output Resistance.0.1 OhmGENERAL:BPM Range.60 - 180 BPMPower Adapter.115V/15V AC 500 mA230V/15V
16、 AC 500 mADimensions.19”w x 1.75”h x 3”d (483 x 44 x 78 mm)Weight.3 lbs (1.5 kg)DescriptionPart #Cabinet Parts and Packing123456789101112131415Item #Parts Lists031-032021-461002-571003-732003-372049-190196-061255-131157-962110-166121-003A110-172A111-044A111-046A131-057CASECHASSISKNOB PUSHHOLDER LED
17、(3 6.5mm)PLATE DISPLAY (SMALL)CLIP WIRESERIAL NO. LABELGIFT BOXOWNERS MANUALBAND-HEAD TAPPING SCREW (TWIN)BAND-HEAD TAPPING SCREW/TW-EBAND-HEAD TAPPING SCREW (TWIN)BAND-HEAD TAPPING SCREW ( “NUT” )BAND-HEAD TAPPING SCREWNUT/WASHER262-239262-240PRINTED CIRCUIT BOARD BPM1-1PRINTED CIRCUIT BOARD BPM1-2
18、DescriptionPart #Printed Circuit BoardsItem #12Page 4074-155074-157INTEGRATED CIRCUIT M66313FPINTEGRATED CIRCUIT SC87C51CCN40IC5IC1DesignatorsDescriptionPart #ICsItem #12Parts Lists - Meter PCB079-027079-003161-169081-027RECTIFIER DIODE 1N4002 (1N4003,1N4004)SILICON DIODE 1N41484P RCA JACKSLIDE SWIT
19、CH 2P2C PH/LND18D8-10, D12-14J1-4SW1-4DesignatorsDescriptionPart #Electrical PartsItem #1234074-011074-074INTEGRATED CIRCUIT UPC324INTEGRATED CIRCUIT NJM7805FAIC2, IC3, IC4, IC8IC7DesignatorsDescriptionPart #ICsItem #12Parts Lists - Main PCB080-102080-003080-062080-063082-041052-018LED NUMERIC DISPL
20、AYLIGHT EMITTING DIODE (RED) 3LIGHT EMITTING DIODE (YELLOW) 3LED (GREEN) 3TACT SWITCHCERAMIC RESONATOR 12 MHzA, BD1-2, D6-7, D20-27, D30D3, D5D4SWA, SWBXT1DesignatorsDescriptionPart #Electrical PartsItem #123456Page 1SERVICE MANUALBPM-1PROFESSIONAL AUTOMATIC BEAT COUNTERCONTENTS:Connections & Operat
21、ions:.Page 2-3Specifications:.Page 3Parts Lists:.Page 3-4PCBs:.Page 5-6Schematics:.Page 7Gemini Sound Products Corp.120 Clover Place P.O. Box 6928Edison, NJ 08818-6928732-738-9003 (Phone) 732-738-9006 (Fax)Page 21718212019211235445687789111010111213141615Page 3Connections1. Make sure that the POWER
22、(13) switch is in the off position. ThePOWER LED (14) will be off. This unit comes supplied with a 15 voltAC adaptor. Plug the adaptor into the rear panel power jack. Then plugthe adaptor into a proper power source.2. Use the 4 stereo PHONO/LINE (2, 5, 8, 11) inputs on the rear panel toconnect to th
23、e output of your sources. The PH1/LN1 (12) switchenables you to set the CHANNEL 1 (11) input sensitivity to Phono orLine. The PH2/LN2 (9) switch enables you to set the CHANNEL 2 (8)input sensitivity to Phono or Line. The PH3/LN3 (6) switch enables youto set the CHANNEL 3 (5) input sensitivity to Pho
24、no or Line. The PH4/LN4 (3) switch enables you to set the CHANNEL 4 (2) input sensitivityto Phono or Line. Note: When using turntables, dont forget to connectthe ground wire from your tuntable to the ground screw of your mixer.3. The BPM-1 is supplied with 4 sets of OUTPUT (1, 4, 7, 10) jacks. If yo
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Gemini BPM1 abc sm 维修 电路 原理图