NAD-T752-avr-si2 维修电路原理图.pdf
《NAD-T752-avr-si2 维修电路原理图.pdf》由会员分享,可在线阅读,更多相关《NAD-T752-avr-si2 维修电路原理图.pdf(3页珍藏版)》请在收音机爱好者资料库上搜索。
1、 Service Information T752Circuit ChangePROBLEM: Muted audio with certain dvd players using the coaxial/opticalinputs .CAUSE: The incoming digital signal isnt recognized as a valid signal.Certain DVD players set the “v” bit incorrectly.SOLUTION: Upgrade software so the receiver will recognise the inc
2、omingsignal. Follow the instructions below for upgrading.Determine software version.1. Turn on the unit and then select an input (eg. DVD) .2. Now press the AUDIO and VIDEO buttons at the same time for 1-2seconds.3. The version of software will appear in the display like, 1.04 A6 or 1.04 A7.4. The A
3、6 or A7 designation determines which microprocessor to use.5. The current software in the microprocessors are 1.06 A6 or 1.06 A7.6. The receiver will not turn on if you try using A6 microprocessors for unitswhich use A7 software.Replacing the microprocessor (see attached photo)1. Remove the top cove
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NAD-T752-avr-si2 维修电路原理图 NAD T752 avr si2 维修 电路 原理图