NAD-T752-avr-sur 维修电路原理图.pdf
《NAD-T752-avr-sur 维修电路原理图.pdf》由会员分享,可在线阅读,更多相关《NAD-T752-avr-sur 维修电路原理图.pdf(2页珍藏版)》请在收音机爱好者资料库上搜索。
1、 Service Information T752 Software Upgrade (Revised) Determine software version. 1. Turn on the unit and then select an input (eg. DVD) 2. Now press the AUDIO and VIDEO buttons at the same time for 1-2 seconds. 3. The version of software will appear in the display eg. 1.06 A7 or 1.19. See note below
2、 if upgrading from 1.06 or earlier. 4. The current software in the microprocessors are 1.22 A7. Replacing the microprocessor (see attached photo) 1. Remove the top cover. 2. The front panel is easily removed .The top of the front panel is held in place with four screws on top and five on bottom. 3.
3、Once the screws are removed pull the front panel forward and unplug the ribbon cable on your right side and the four pin connector as well. 4. Unplug the three pin and eight pin cables on the left side. 5. The microprocessor can now be removed. 6. Locate U201 and if required U202, see diagrams for r
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NAD-T752-avr-sur 维修电路原理图 NAD T752 avr sur 维修 电路 原理图