Yamaha-NXP150-hts-sm 维修电路原理图.pdf
《Yamaha-NXP150-hts-sm 维修电路原理图.pdf》由会员分享,可在线阅读,更多相关《Yamaha-NXP150-hts-sm 维修电路原理图.pdf(100页珍藏版)》请在收音机爱好者资料库上搜索。
1、SERVICE MANUALThis manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are alreadyknown and understood by the users, and have therefore not b
2、een restated.WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personalinjury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,we advise all YAMAHA product owners that any service r
3、equired should be performed by an authorized YAMAHARetailer or the appointed service representative.IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification orrecognition of any applicable technical capabilities, or establish a prin
4、ciple-agent relationship of any form.The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and servicedepartments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable andspecifi
5、cations are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact thedistributors Service Division.WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may haveaccumulated by grounding your
6、self to the ground buss in the unit (heavy gauge black wires connect to this buss).IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.IMPORTANT NOTICE100917SERVICE MANUALDVR-S150/NX-P150HOME THEATER SOUND SYSTEM DVX-S150The DVX-S1
7、50 is composed of the DVR-S150 and the NX-P150.DVX-S150 DVR-S150NX-P150 構成。DVR-S150 SELF DIAGNOSIS FUNCTION (DIAG) /DVR-S150自己診断機能() . . . . . . . . . .2243DVR-S150 D-AMP MODULE TROUBLESHOOTING /DVR-S150 D-故障診断 . . . . . . . .44DVR-S150 AMP ADJUSTMENT /DVR-S150部調整 . . . . . . . . . . . . . . . . . .
8、 . . . . .44DISPLAY DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45IC DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4656DVR-S150 BLOCK DIAGRAM . . . . . . . . . . . . . .5759DVR-S150 PRINTED CIRCUIT BOARD . . . . . . .6068NX-SW150 PRINTED CIRCUIT BOARD . . . .
9、. . . . .69DVR-S150 SCHEMATIC DIAGRAM . . . . . . . . . .7079NX-SW150 SCHEMATIC DIAGRAM . . . . . . . . . . . .80PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8199REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . .100I CONTENTSTO SERVICE PERSONNEL . . . . . . . . . .
10、 . . . . . . . .24PREVENTION OF ELECTRO STATIC DISCHARGE . . . . . .4LOCALE MANAGEMENT INFORMATION . . . . . . . .5SYSTEM COMPOSITION / 構成 . . . . . . . . . . .5FRONT PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . .67REMOTE CONTROL PANELS . . . . . . . . . . . . . . . . . .7REAR PANELS .
11、 . . . . . . . . . . . . . . . . . . . . . . . . . . .89SPECIFICATIONS / 参考仕様 . . . . . . . . . . . . . . . .1012INTERNAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . .13DVR-S150 DISASSEMBLY PROCEDURES /DVR-S150分解手順 . . . . . . . . . . . . . . . . . . . . . . . .1418NX-SW150 DISASSEMBL
12、Y PROCEDURES /NX-SW150分解手順 . . . . . . . . . . . . . . . . . . . . . . .1920DVR-S150 TRAY LOCK MODE /DVR-S150 . . . . . . . . . . . . . . . . .21DVR-S150NX-P150 04.08RadioFans.CN 收音机爱 好者资料库DVR-S150/NX-P1502DVR-S150NX-P150I TO SERVICE PERSONNEL1. Critical Components InformationComponents having speci
13、al characteristics are marked Zand must be replaced with parts having specifications equalto those originally installed.2. Leakage Current Measurement (For 120V Models Only)When service has been completed, it is imperative to verifythat all exposed conductive surfaces are properly insulatedfrom supp
14、ly circuits.GMeter impedance should be equivalent to 1500 ohm shuntedby 0.15F.AC LEAKAGETESTER OREQUIVALENTEQUIPMENTUNDER TESTINSULATINGTABLEWALLOUTLETGLeakage current must not exceed 0.5mA.GBe sure to test for leakage with the AC plug in bothpolarities.WARNING: CHEMICAL CONTENT NOTICE!The solder us
15、ed in the production of this product contains LEAD. In addition, other electrical/electronic and/orplastic (where applicable) components may also contain traces of chemicals found by the California Health andWelfare Agency (and possibly other entities) to cause cancer and/or birth defects or other r
16、eproductive harm.DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FORANY REASON WHATSOEVER!Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumesor expose eyes to solder/flux vapor!If you come in contact with solder
17、 or components located inside the enclosure of this product, wash your handsbefore handling food.About lead-free solder / 無鉛Among some types of lead-free solder currently available, itis recommended to use one of the following types for therepair work. Sn + Ag + Cu (tin + silver + copper) Sn + Cu (t
18、in + copper) Sn + Zn + Bi (tin + zinc + bismuth)Caution:1. As the melting point temperature of the lead-free solderis about 30C to 40C (50F to 70F) higher than that ofthe lead solder, be sure to use a soldering iron suitable toeach solder.無鉛種類、修理時下記無鉛使用推奨。Sn+Ag+Cu (錫+ 銀+銅)Sn+Cu (錫+ 銅)Sn+Zn+Bi (錫+ 亜鉛
19、+)注意:1. 無鉛融点温度通常鉛入比3040 程度高、合使用。The P.C.B.s installed in this unit are soldered using the fol-lowing solder.本機搭載基板付使用下記通。SI DE A / A面SI DE B / B面DI GI TAL P. C. B.Lead Free Solder / 無鉛Lead Free Solder / 無鉛MAI N P. C. B.Lead Free Solder / 無鉛SUB P. C. B.Lead Free Solder / 無鉛Side ASide BSMT REFLOW Proc
20、essMI FLOW ProcessSolder DipRadioFans.CN 收音机爱 好者资料库DVR-S150/NX-P150DVR-S150NX-P1503WARNING: Laser SafetyThis product contains a laser beam component. Thiscomponent may emit invisible, as well as visible radiation,which may cause eye damage. To protect your eyesand skin from laser radiation, the foll
21、owing precautionsmust be used during servicing of the unit.1) When testing and/or repairing any component within theproduct, keep your eyes and skin more than 30 cmaway from the laser pick-up unit at all times. Do notstare at the laser beam at any time.2) Do not attempt to readjust, disassemble or r
22、epair thelaser pick-up, unless noted elsewhere in this manual.3) CAUTION : Use of controls, adjustments orperformance of procedures other than those specifiedherein may result in hazardous radiation exposure.Laser Emitting conditions:1) When the Top Cover is removed, and the STANDBY/ON SW is turned
23、to the ON position, the lasercomponent will emit a beam for several seconds todetect if a disc is present. During this time (5-10 sec.)the laser may radiate through the lens of the laser pick-up unit. Do not attempt any servicing during this period!If no disc is detected, the laser will stop emittin
24、g thebeam. When a disc is loaded, you will not be exposedto any laser emissions.2) The laser power level can be adjusted with the VR onthe pick-up PWB, however, this level has been set bythe factory prior to shipping from the factory. Do notadjust this laser level control unless instruction isprovid
25、ed elsewhere in this manual. Adjustment of thiscontrol can increase the laser emission level from thedevice.警告:安全対策本機光線放射部品搭載。部品放射光線目損傷起。光線目及肌保護、本機修理作業中下記注意厳守。) 時修理時、 目及肌光30c以上離。 場合光線見。) 光再調整及分解。) 上指定以外制御、 調整、手順光線照射結果招恐。放射条件) 取外STANDBY/ONON、検知510秒間、光光線放射。 間、 修理。検知、 光線放射停止。 場合、 遮光線修理担当者届。) 光基板上VR調整可能
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Yamaha-NXP150-hts-sm 维修电路原理图 Yamaha NXP150 hts sm 维修 电路 原理图