Yamaha-HTR2064-hts-sm 维修电路原理图.pdf
《Yamaha-HTR2064-hts-sm 维修电路原理图.pdf》由会员分享,可在线阅读,更多相关《Yamaha-HTR2064-hts-sm 维修电路原理图.pdf(96页珍藏版)》请在收音机爱好者资料库上搜索。
1、11.12Copyright 2011 All rights reserved.This manual is copyrighted by YAMAHA and may not be copied orredistributed either in print or electronically without permission.101 2 2 7SERVICE MANUALIMPORTANT NOTICEThis manual has been provided for the use of authorized YAMAHA Retailers and their service pe
2、rsonnel.It has been assumed that basic service procedures inherent to the industry, and more specifi cally YAMAHA Products, are already known and understood by the users, and have therefore not been restated.WARNING: Failure to follow appropriate service and safety procedures when servicing this pro
3、duct may result in personal injury, destruction of expensive components, and failure of the product to perform as specifi ed. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative.
4、IMPORTANT: The presentation or sale of this manual to any individual or fi rm does not constitute authorization, certifi cation or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.The data provided is believed to be accurate and applicable
5、 to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifi cations are subject to change without notice or obligation to retrofi t. Should any discrepan
6、cy appear to exist, please contact the distributors Service Division.WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).IMPORT
7、ANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. CONTENTSTO SERVICE PERSONNEL .2SYSTEM COMPOSITION .3FRONT PANELS .34REAR PANELS .57REMOTE CONTROL PANEL .8SPECIFICATIONS .814INTERNAL VIEW .15SERVICE PRECAUTIONS .15POWERAMPLIFIER IC
8、REPLACEMENT .1617DISASSEMBLY PROCEDURES .1820UPDATING FIRMWARE .2123SELF-DIAGNOSTIC FUNCTION .2446DISPLAY DATA .4748IC DATA .4960PIN CONNECTION DIAGRAMS .6162BLOCK DIAGRAM .63PRINTED CIRCUIT BOARDS .6476SCHEMATIC DIAGRAMS .7784REPLACEMENT PARTS LIST .8592REMOTE CONTROL .9394ADVANCED SETUP .95The YHT
9、-196 consists of the HTR-2064, NS-B20, NS-C20 and NS-SWP20.Note: When the following parts are replaced, the destination MUST be written to the back-up IC (EEPROM: IC222 on DIGITAL P.C.B.) to have proper operation. (For details, refer to No. 22 SOFT SWITCH menu of the self-diagnostic function.)DIGITA
10、L P.C.B.EEPROM: IC222 on DIGITAL P.C.B. When the power amplifier IC (IC 1 or IC 2 on MAIN P.C.B.) requires to be replaced, be sure to refer to “POWER AMPLIFIER IC REPLACEMENT” before its replacement.P.O.Bo 1, Hamamatsu, apanRECEIVER / SPEAKERSHTR-2064 /NS-B20/NS-C20/NS-SWP20HTR-2064/NS-B20/NS-C20/NS
11、-SWP20HOME THEATER PACKAGEYHT-196RadioFans.CN 收音机爱 好者资料库This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm.DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHATSOEVER!Avoid prolong
12、ed, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor!If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.1. Critical Components InformationC
13、omponents having special characteristics are marked and must be replaced with parts having specifications equal to those originally installed.2. Leakage Current Measurement (For 120V Models Only)When service has been completed, it is imperative to verify that all exposed conductive surfaces are prop
14、erly insulated from supply circuits. Meter impedance should be equivalent to 1500 ohms shunted by 0.15 F.All of the P.C.B.s installed in this unit and solder joints are soldered using the lead free solder.Among some types of lead free solder currently available, it is recommended to use one of the f
15、ollowing types for the repair work. Sn + Ag + Cu (tin + silver + copper) Sn + Cu (tin + copper) Sn + Zn + Bi (tin + zinc + bismuth)Caution:As the melting point temperature of the lead free solder is about 30C to 40C (50F to 70F) higher than that of the lead solder, be sure to use a soldering iron su
16、itable to each solder. TO SERVICE PERSONNEL Leakage current must not exceed 0.5mA. Be sure to test for leakage with the AC plug in both polarities.WARNING: CHEMICAL CONTENT NOTICE!About lead free solderFor U model“CAUTION”“F1501: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME
17、TYPE 6A, 125V FUSE.”For C modelCAUTIONF1501: REPLACE WITH SAME TYPE 6A, 125V FUSE.ATTENTIONF1501: UTILISER UN FUSIBLE DE RECHANGE DE MME TYPE DE 6A, 125V.WALLOUTLETEQUIPMENTUNDER TESTAC LEAKAGETESTER OREQUIVALENTINSULATINGTABLE2HTR-2064/NS-B20/NS-C20/NS-SWP20HTR-2064/NS-B20/NS-C20/NS-SWP20RadioFans.
18、CN 收音机爱 好者资料库 SYSTEM COMPOSITIONThe YHT-196 consists of the HTR-2064, NS-B20 x4, NS-C20 x1 and NS-SWP20 x1. FRONT PANELSTop view (U, C, R, A, B, G, F, L models)Front view (U, C, R, A, B, G, F, L models)NS-SWP20 x 1NS-C20 x 1NS-B20 x 4HTR-2064 x 1YHT-196HTR-20643HTR-2064/NS-B20/NS-C20/NS-SWP20HTR-206
19、4/NS-B20/NS-C20/NS-SWP20NS-B20NS-C20Front viewNS-SWP20Side viewNS-B20/NS-C20/NS-SWP204HTR-2064/NS-B20/NS-C20/NS-SWP20HTR-2064/NS-B20/NS-C20/NS-SWP20 REAR PANELSU, C modelsR modelA modelHTR-20645HTR-2064/NS-B20/NS-C20/NS-SWP20HTR-2064/NS-B20/NS-C20/NS-SWP20B, G, F modelsL model6HTR-2064/NS-B20/NS-C20
20、/NS-SWP20HTR-2064/NS-B20/NS-C20/NS-SWP20NS-C20NS-B20U modelNS-SWP20NS-B20/NS-C20/NS-SWP207HTR-2064/NS-B20/NS-C20/NS-SWP20HTR-2064/NS-B20/NS-C20/NS-SWP20 REMOTE CONTROL PANELRAV435(U, C, R, A, B, G, F, L models) SPECIFICATIONS Audio SectionRated Output Power (0.9 % THD, 6 ohms) 2 channel driven (U, C
21、 models)FRONT L/R (1 kHz) .80 W + 80 WCENTER (1 kHz) .80 WSURROUND L/R (1 kHz) .80 W + 80 WSUBWOOFER (50 Hz) .80 W 1 channel driven FRONT L/R (1 kHz) .100 W/chCENTER (1 kHz) .100 WSURROUND L/R (1 kHz) .100 W/chSUBWOOFER (50 Hz) .100 WMaximum Effective Output Power (1 channel driven, JEITA)(10 % THD,
22、 6 ohms) R, L modelsFRONT L/R (1 kHz) .135 W + 135 WCENTER (1 kHz) .135 WSURROUND L/R (1 kHz) .135 W + 135 WSUBWOOFER (50 Hz) .135 WDynamic Power Per Channel (1 channel driven, IHF)FRONT L/RU, C models6/4/2 ohms .130/160/180 WR, A, B, G, F, L models 6/4/2 ohms .105/130/150 WDynamic Headroom U, C mod
23、els6 ohms .0.23 dBInput Sensitivity/Input Impedance (1 kHz, 100 W / 6 ohms)AUDIO5, etc. . 200 mV / 47 k-ohmsMaximum Input Signal (1 kHz, 0.5 % THD, Effect on)AUDIO5, etc. .2.3 VOutput Level/Output ImpedanceSUBWOOFER (2 ch STEREO and FRONT speaker: Small) . 1 V / 1.2 k-ohmsHeadphone Jack Rated Output
24、/Impedance (1 kHz, 50 mV)AUDIO5, etc. input . 100 mV / 470 ohmsFrequency Response (10 Hz to 100 kHz)AUDIO5, etc. to FRONT L/R .0 / -3.0 dBTotal Harmonic Distortion (1 kHz, 50 W, 6 ohms)AUDIO5, etc. (straight) to FRONT speaker out .0.06 % or lessSignal to Noise Ratio (IHF-A Network)AUDIO5, etc. (STER
25、EO)Input shorted (250 mV) to speaker out . 98 dB or moreResidual Noise (IHF-A Network)FRONT L/R to speaker out .150 V or lessChannel SeparationAUDIO5, etc. (Input 5.1 k-ohms shorted, 1 kHz / 10 kHz) . 60 dB or more / 45 dB or moreVolume Control .MUTE / -80 dB to +16.5 dB / 0.5 dB stepHTR-20648HTR-20
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Yamaha-HTR2064-hts-sm 维修电路原理图 Yamaha HTR2064 hts sm 维修 电路 原理图