Bose-Companion3S2-mss-sm维修电路原理图.pdf
《Bose-Companion3S2-mss-sm维修电路原理图.pdf》由会员分享,可在线阅读,更多相关《Bose-Companion3S2-mss-sm维修电路原理图.pdf(36页珍藏版)》请在收音机爱好者资料库上搜索。
1、Companion 3 Series II MultimediaSpeaker System2007 Bose CorporationService ManualReference Number 297700-SM Rev. 05Electronic copy onlyThe Companion 3 series II multimedia speaker system is a stereo system designed to be used as a computersound system. It can be used with any analog audio source. It
2、 has a bass module with a 6.5 inch dual voicecoil woofer in a slot ported design. The two satellite speakers connect to the bass module and are mountedto speaker stands. The speakers can be placed on a desk or other surface when removed from the stands. Awired remote control pod is used to control v
3、olume and mute/un-mute functions. The system also has asecond input and a stereo headphone output on the control pod.Product DescriptionRadioFans.CN 收音机爱 好者资料库2WarrantyThe Bose Companion 3 series II MultiMedia Speaker System is covered by a 1-year, transferablelimited warranty.Caution: The Companion
4、 3 series II MultiMedia Speaker System contains no user serviceable parts.To prevent warranty infractions, refer servicing to warranty service centers or factory service.Proprietary InformationTHIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF BOSECORPORATION WHICH IS BEING FURNISHED ONLY FOR THE PUR
5、POSE OFSERVICING THE IDENTIFIED BOSE PRODUCT BY AN AUTHORIZED BOSESERVICE CENTER OR OWNER OF THE BOSE PRODUCT, AND SHALL NOTBE REPRODUCED OR USED FOR ANY OTHER PURPOSE.ContentsSafety Information.3Electrostatic Discharge Sensitive (ESDS) Device Handling.3Specifications.4Part List Notes .5Figure 1. Ba
6、ss Module Assembly Exploded View.56Bass Module Assembly Parts List .6Figure 2. Amplifier Module Assembly Exploded View.7Amplifier Module Assembly Parts list.7Figure 3. Packing Exploded Veiw .8Packing Parts List .8Electrical Parts List . 9-19Main PCB Assembly Parts List. 9-17Power Supply PCB Assembly
7、 Parts List . 18-19Disassembly Procedures . 20-22Test Procedures . 23-25Theory of Operation . 26-28Revision History .29RadioFans.CN 收音机爱 好者资料库3Safety Information1. Parts that have special safety characteristics are identified by the symbol on the schematicsor by special notes on the parts list. Use
8、only replacement parts that have critical characteristicsrecommended by the manufacturer.2. Make leakage current or resistance measurements to determine that exposed parts are acceptablyinsulated from the supply circuit before returning the unit to the customer. Use the following checks toperform th
9、ese measurements:A. Leakage Current Hot Check- With the unit completely reassembled, plug the AC line cord directlyinto a 120V AC outlet. (Do not use an isolation transformer during this test). Use a leakage currenttester or a metering system that complies with the American National Standards Instit
10、ute (ANSI)C101.1 “Leakage Current for Appliances” and the Underwriters Laboratories (UL) 6500/IEC 60056paragraph 9.1.1. With the unit AC switch first in the ON position and then in the OFF position, mea-sure from a known earth ground (metal waterpipe, conduit, etc.) to all exposed metal parts of the
11、 unit(antennas, handle bracket, metal cabinet, screwheads, metallic overlays, control shafts, etc.) espe-cially any exposed metal parts that offer an electrical return path to the chassis. Any current measuredmust not exceed 0.5 milliamp. Reverse the unit power cord plug in the AC outlet and repeat
12、the test.ANY MEASUREMENTS NOT WITHIN THE LIMITS SPECIFIED HEREIN INDICATE A POTENTIALSHOCK HAZARD THAT MUST BE ELIMINATED BEFORE RETURNING THE UNIT TO THE CUS-TOMER.B. Insulation Resistance Test Cold Check- (1) Unplug the power supply and connect a jumper wirebetween the two prongs of the plug. (2)
13、Turn on the power switch of the unit. (3) Measure the resis-tance with an ohmmeter between the jumpered AC plug and each exposed metallic cabinet part onthe unit. When testing 3 wire products, the resistance measured to the product enclosure should bebetween 2 and infinite MOhms. Also, the resistanc
14、e measured to exposed input/output connectorsshould be between 4 and infinite MOhms. When testing 2 wire products, the resistance measured toexposed input/output connectors should be between 4 and infinite MOhms. If it is not within the limitsspecified, there is the possibility of a shock hazard, an
15、d the unit must be repaired and recheckedbefore it is returned to the customer.Electrostatic Discharge Sensitive (ESDS)Device HandlingThis unit contains ESDS devices. We recommend the following precautions when repairing, replacingor transporting ESDS devices:Perform work at an electrically grounded
16、 work station.Wear wrist straps that connect to the station or heel straps that connect to conductive floor mats.Avoid touching the leads or contacts of ESDS devices or PC boards even if properly grounded.Handle boards by the edges only.Transport or store ESDS devices in ESD protective bags, bins, o
17、r totes. Do not insert unprotecteddevices into materials such as plastic, polystyrene foam, clear plastic bags, bubble wrap or plastictrays.4SpecificationsMechanical Dimensions: Bass Module: 8 5/8 “ H x 7 1/8” W x 14” D (21.8 x 18 x 35.56 cm) Satellite Speaker: (no stand) 2 1/2” H x 2 3/4” W x 2 3/8
18、” D (6.14 x 6.86 x 6.03 cm) Control Pod: 2 1/2 “ D x 1 1/8” H (6.35 x 2.79 cm) Weight: Bass Module: 14.65 lbs (6.64 kg) unpacked Satellite Speaker: .75 lbs (0.34 kg) each Packaged System: 20.15 lbs (9.13 kg) packed Finish: Bass Module: Scratch-resistant, satin-finish vinyl Satellites: Painted polyme
19、r finish Bass Box: Slot ported Bass Box Port Tuning: 45 Hz Electrical Power Rating: USA/Canada: 115 VAC 50/60 Hz Japan: 100 VAC 50/60 Hz Euro: 230 VAC 50/60 Hz Nominal System Bandwidth: 40 Hz to 15 kHz Maximum SPL: 100 dB (A weighted) pink noise signal Output: Bass: 60 Watts Satellites: 18 Watts per
20、 channel 5Part List Notes1. This part is not normally available from Customer Service. Approval from the Field Service Manageris required before ordering.2. The individual parts on the PCBs are listed in the Electrical Part list.3. This part is critical for safety purposes. Failure to use a substitu
21、te replacement with the samesafety characteristics as the recommended replacement part might create shock, fire and/or otherhazards.4. The part number listed is an assembly part number. The individual parts of the assembly might notbe available separately.5. This part is referenced for informational
22、 purposes only. It is not stocked as a repair part. Refer tothe next higher assembly for a replacement part.6Figure 1. Bass Module Assembly Exploded View1 12 23 34 48 86 65 57 7X3X5Bass Module Assembly Exploded View *Capacitor C7 on the new power supply board may need to be replaced, see Service Bul
23、letin 271885-B4 Item Description Part Number Qty. Note 1 BASS MODULE, ASSY, US/CANADA, 120V (Electrofoil Logo) BASS MODULE, ASSY, EURO, 230V (Electrofoil Logo) BASS MODULE, ASSY, JAPAN, 100V (Electrofoil Logo) BASS MODULE, ASSY, US/CANADA, 120V (Padprint Logo) BASS MODULE, ASSY, EURO, 230V (Padprint
24、 Logo) BASS MODULE, ASSY, JAPAN, 100V (Padprint Logo) (Complete bass module package, includes Amp Mod Assy) *300905-001 *300905-003 *300905-002 *303939-112 *303939-122 *303939-132 1112 CLEAT, ABS 271817-001 1 5 3 SCREW, 4 x 1, THDF, FLHD, 82 DEG, PH 274151-16 3 4 CLIP, SPRING, KNOB 262542 1 5 KNOB,
25、VOL CNTL, BLK 271860-001 1 6 LABEL, I/O, US/CANADA, 120V LABEL, I/O, JAPAN, 100V LABEL, I/O, EURO, 230V 300954-001 300954-002 300954-003 17 SCREW, TF, 4 x 3/4, PAN, PH, BLK 273556-12 5 8 MOD ASSY, AMP, 120V MOD ASSY, AMP, 220V, EURO MOD ASSY, AMP, 100V JAPAN *307876-011 *307876-033 *307876-022 1113-
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Bose Companion3S2 mss sm 维修 电路 原理图