AIWA HS JL505 电路图 维修原理图.pdf

《AIWA HS JL505 电路图 维修原理图.pdf》由会员分享，可在线阅读，更多相关《AIWA HS JL505 电路图 维修原理图.pdf（19页珍藏版）》请在收音机爱好者资料库上搜索。

1、 PRINTING THE ELECTRONIC DOCUMENT The PDF of this service manual is not designed to be printed from cover to cover. The pages vary in size, and must therefore be printed in sections based on page dimensions. NON-SCHEMATIC PAGES Data that does NOT INCLUDE schematic diagrams are formatted to 8.5 x 11

2、inches and can be printed on standard letter-size and/or A4-sized paper. SCHEMATIC DIAGRAMS The schematic diagram pages are provided in two ways, full size and tiled. The full-sized schematic diagrams are formatted on paper sizes between 8.5” x 11” and 18” x 30” depending upon each individual diagra

3、m size. Those diagrams that are LARGER than 11” x 17” in full-size mode have been tiled for your convience and can be printed on standard 11” x 17” (tabloid-size) paper, and reassembled. TO PRINT FULL SIZE SCHEMATIC DIAGRAMS If you have access to a large paper plotter or printer capable of outputtin

4、g the full-sized diagrams, output as follows: 1) Note the page size(s) of the schematics you want to output as indicated in the middle window at the bottom of the viewing screen. 2) Go to the File menu and select Print Set-up. Choose the printer name and driver for your large format printer. Con fi

5、rm that the printer settings are set to output the indicated page size or larger. 3) Close the Print Set Up screen and return to the File menu. Select “Print.” Input the page number of the schematic(s) you want to print in the print range window. Choose OK. TO PRINT TILED VERSION OF SCHEMATICS Schem

6、atic pages that are larger than 11” x 17” full-size are provided in a 11” x 17” printable tiled format near the end of the document. These can be printed to tabloid-sized paper and assembled to full-size for easy viewing. If you have access to a printer capable of outputting the tabloid size (11” x

7、17”) paper, then output the tiled version of the diagram as follows: 1) Note the page number(s) of the schematics you want to output as indicated in the middle window at the bottom of the viewing screen. 2) Go to the File menu and select Print Set-up. Choose the printer name and driver for your prin

8、ter. Con fi rm that the plotter settings are set to output 11” x 17”, or tabloid size paper in landscape ( ) mode. 3) Close the Print Set Up screen and return to the File menu. Select “Print.” Input the page number of the schematic(s) you want to print in the print range window. Choose OK. TO PRINT

9、SPECIFIC SECTIONS OF A SCHEMATIC To print just a particular section of a PDF, rather than a full page, access the Graphics Select tool in the Acrobat Reader tool bar. 1) To view the Graphics Select Tool, press and HOLD the mouse button over the Text Select Tool which looks like: This tool will expan

10、d to reveal to additional tools. Choose the Graphics Select tool by placing the cursor over the button on of the far right that looks like: 2) After selecting the Graphics Select Tool, place your cursor in the document window and the cursor will change to a plus (+) symbol. Click and drag the cursor

11、 over the area you want to print. When you release the mouse button, a marquee (or dotted lined box) will be displayed outlining the area you selected. 3) With the marquee in place, go to the fi le menu and select the “Print.” option. When the print window appears, choose the option under the section called “Print Range” which says “Selected Graphic”. Select OK and the output will print only the area that you outlined with the marquee. T