Fostex-VC8-adat-sm维修电路原理图.pdf
《Fostex-VC8-adat-sm维修电路原理图.pdf》由会员分享,可在线阅读,更多相关《Fostex-VC8-adat-sm维修电路原理图.pdf(20页珍藏版)》请在收音机爱好者资料库上搜索。
1、Service Manual Model VC-8 ADAT/ANALOG Converter RadioFans.CN 收音机爱 好者资料库 SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. POUR VITER LES CHOCS LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
2、 BORNE CORRE- SPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND. CAUTION: ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte- nance (servicing) instructions in the literature accompanying the appliance. The lig
3、htening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclo- sure that may be of sufficient magnitude to constitute a risk of electric shock to persons. “WARNING” “TO REDUCE THE RISK O
4、F FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.” CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1.Read instructions - All the safety and operating instructions
5、 should be read before the appliance is operated. 2.Retain instructions - The safety and operating instructions should be retained for future reference. 3.Heed warnings - All warnings on the appliance and in the oper- ating instructions should be adhered to. 4.Follow instructions - All operating and
6、 use instructions should be followed. 5.Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like. 6.Carts and Stands - The appliance should be used only with a cart or
7、 stand that is recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 7.Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling o
8、nly as recommended by the manufacturer. 8.Ventilation - The appliance should be situated so that its lo- cation or position does not interfere with its proper ventila- tion. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventila- tion ope
9、nings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 9.Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other ap- pliances (including amplifiers) that
10、produce heat. 10.Power Sources - The appliance should be connected to a power supply only of the type described in the operating in- structions or as marked on the appliance. 11.Grounding or Polarization - The precautions that should be taken so that the grounding or polarization means of an appli-
11、ance is not defeated. 12.Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
12、13.Cleaning - The appliance should be cleaned only as recom- mended by the manufacturer. 14.Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 15.Object and Liquid Entry - Care should be taken so that objects do not fall a
13、nd liquids are not spilled into the enclosure through openings. 16.Damage requiring Service - The appliance should be serviced by qualified service personnel when: A.The power supply cord or the plug has been damaged; or B.Objects have fallen, or liquid has been spilled into the appliance; or C.The
14、appliance has been exposed to rain; or D.The appliance does not appear to operate normally or exhibits a marked changed in performance; or E.The appliance has been dropped, or the enclosure damaged. 17Servicing - The user should not attempt to service the appli- ance beyond that described in the ope
15、rating instructions. All other servicing should be referred to qualified service personnel. RadioFans.CN 收音机爱 好者资料库 VC-8 3 TABLE OF CONTENTS NOTES * Parts List and circuit diagrams are given in this manual to assist the service technician in maintaining the Model VC-8. * The following accessories ar
16、e supplied with VC-8 as the standard accessories. Owners manual, VC-8, MLT: 8288444000 AC adaptor AD-12A: 8270727003 (for USA/CND) : 8270727006 (for EUR) : 8270727007 (for UK) : 8270727010 (for JPN) * Following is the packing material for the Model VC-8. PACK, SIDE, L, DE-1: 8228454000 PACK, SIDE, R
17、, DE-1: 8228455000 CARTON, INNER, VC-8: 8228727000 CARTON, OUTER, VC-8: 8228906000 1. SPECIFICATIONS.4 2. CONTROLS, INDICATORS AND CONNECTORS.5 3. EXPLODED VIEW.6 4. PARTS LIST.8 5. PCB PATTERN DRAWING.10 6. CIRCUIT DIAGRAMS .12 CAUTION Parts marked with this sign are safety critical components. The
18、y must always be replaced with identical components. Refer to the Fostex Parts List and ensure exact replacement. RadioFans.CN 收音机爱 好者资料库 VC-8 4 1. SPECIFICATIONS (Specification Unit : 0 dBV = 1 Vrms) INPUT 18 ConnectorRCA pin jack Input Impedance20k or more Input Level-10dBV OUTPUT 18 ConnectorRCA
19、pin jack Load Impedance10k or more Output Level-10dBV DATA IN/OUT ConnectorSquare shape optical FormatIEC60958 (S/P DIF) ALESIS Proprietary Multi Channel Optical Interface WORD IN ConnectorBNC type Input ImpedanceTerminate switch ON: 75 Terminate switch OFF : Hi impedance Input LevelHi Level : 3.55V
20、 Lo Level : 01V DIGITAL SECTION Quantization20-bit linear AD Converter20 bit 64 times over sampling modulation DA Converter20 bit 128times over sampling modulation Sampling FrequencyINT mode: 44.1kHz OPTICAL/WORD mode : 3248kHz CHARACTERISTICS Overall Frequency Responce+1, -2dB (20Hz20kHz) Dynamic R
21、ange (overall)90dB or more T.H.D.0.008% or less (at 1kHz,+2dB) Channel Separation80dB or more (at 1kHz) S/N (overall)90dB or more Phase Difference between Channel20 or less Click NoisePower ON/OFF : -20dBV or less GENERAL Dimensions220 (W) x 43 (H) x 200 (D) mm Weight1.0kg (Excluding accessories) Po
22、wer SupplyDC12V, 600mA, Exclusive AC Adaptor (AD-12A) * Specifications and appearance are subjects to change without notice for product improvement. * Adat and the marks are trademarks of Alesis Corporation. RadioFans.CN 收音机爱 好者资料库 VC-8 5 2. CONTROLS, INDICATORS AND CONNECTORS 1.WORD IN terminate sw
23、itch 2.LOCKED LED 3.CLOCK select switch 4.ANALOG INPUT MODE switch 5.DIGITAL MODE select switch 6.POWER switch 7.POWER LED 8.DC IN jack Center: Plus + 9.ANALOG INPUT connectors 18 RCA 10.ANALOG OUTPUT connectors 18 RCA 11.WORD IN connector BNC 12.DIGITAL INPUT connectors Square shape optical 13.DIGI
24、TAL OUTPUT connectors Square shape optical 75 OFFON ANALOG INPUT MODECLOCKDIGITAL MODE ADAT/ANALOG CONVERTER POWER WORD 1-41-81-2ONSTBYINT(44.1k)OPTICAL LOCKED S/P DIFADAT OPTICAL 5432167 AD-12A ONLY IN OUT WORD INDIGITAL OUTIN54321 54321 ANALOG 76 768 8 12V DC IN OPTICAL 89 10 111312 RadioFans.CN 收
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Fostex VC8 adat sm 维修 电路 原理图