NAD-T163-pre-tb维修电路原理图.pdf
-
资源ID：97415
资源大小：410.79KB
全文页数：2页
- 资源格式： PDF
下载积分：8积分
会员登录下载
三方登录下载：
|
友情提示
2、PDF文件下载后，可能会被浏览器默认打开，此种情况可以点击浏览器菜单，保存网页到桌面，就可以正常下载了。
3、本站不支持迅雷下载，请使用电脑自带的IE浏览器，或者360浏览器、谷歌浏览器下载即可。
4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩，下载后原文更清晰。
5、试题试卷类文档，如果标题没有明确说明有答案则都视为没有答案，请知晓。
|
NAD-T163-pre-tb维修电路原理图.pdf
Page 1 of 2 Technical BulletinT163 Product:A/V Tuner Preamplifier Software Technical Bulletin: T163-S2004-01 Date:Aug. 24/04Subject: Software Upgrade Procedure Note: Previous T.B.s required: K K K K YES K K K K NO DESCRIPTION: Procedure for upgrading the firmware in a T163 unit via PC software. The T163 has the capability of being upgraded through the serial port using a personal computer. The software is compatible with Windows 95, 98, ME, NT4, 2000, and XP. Locate the RS-232 port shown here on the rear panel of the unit. See page 2 for instructions. Contact: NAD Electronics International 633 Granite Court Pickering, ON Canada L1K 3K1 Voice: 905-831-0799 FAX 905-837-6357 RadioFans.CN 收音机爱 好者资料库 Page 2 of 2 Technical BulletinT163 Product:A/V Tuner Preamplifier Software Technical Bulletin: T163-S2004-01 1. Use a RS-232 (serial) cable to connect your PC to the back of the unit to be upgraded. It does not matter which COM port of your PC that you attach it to. 2. Turn the unit on. 3. Run the upgrade program on your PC. 4. Click on the button on the software. 5. The software will auto-detect the unit and the COM port that its on. If this stage fails, please ensure that that the serial cable is attached properly to both the PC and the unit, and that the unit is powered on. 6. Please do not shut off power to the unit during the upgrade process, unless instructed to by the program. 7. Follow directions as per the program. Note that depending on the type of micro-controller inside the unit, you may have to turn the unit off and then back on by using the power switch at the back, at certain times, as instructed to by the program. 8. Once the unit has been upgraded successfully, please power the unit off using the power switch at the back. 9. In order to ensure that the unit operates properly, please do a reset of the unit. First turn the power to ON (not STANDBY). The unit is reset by holding down VIDEO and TONE DEFEAT buttons simultaneously for North American (AH) units, VIDEO and TONE CONTROL for European (C) units. 10. On the software, you may click on the button to re-start the upgrade process for another unit, as per your needs. Contact: NAD Electronics International 633 Granite Court Pickering, ON Canada L1K 3K1 Voice: 905-831-0799 FAX 905-837-6357 RadioFans.CN 收音机爱 好者资料库
