HarmanKardon-HS100MK1-hts-sm维修电路原理图.pdf

harman kardon Model HS100HS100 INTEGRATED HOME THEATER SYSTEM DVD/ DVD-Audio/DVDR/RW/CD/CDR/VCD/SVCD Player 5 X 35W 5.1 CHANNEL A/V RECEIVER Service Manual - Contents - SERVICING PRECAUTIONS.2 ESD PRECAUTIONS.4 SPECIFICATIONS.5 PACKAGING/ACCESSORIES.6 FRONT PANEL CONTROLS.7 INFORMATION DISPLAY.8 REAR PANEL CONNECTIONS.9 REMOTE CONTROL.10 INSTALLATION/CONNECTIONS.12 SYSTEM SETUP.14 BASIC OPERATION.19 BASIC TROUBLESHOOTING GUIDE/RESET.20 OVERALL EXPLODED VIEW.21 BLOCK DIAGRAM.22 HS100 ELECTRICAL PARTS LIST.23 HS100 MECHANICAL PARTS LIST.31 PCB DRAWINGS.33 SEMICONDUCTOR PINOUTS.43 SCHEMATICS.53 harman/kardon, Inc. 250 Crossways Park Dr. Woodbury, New York 11797 Rev 1 6/2007 RadioFans.CN SERVICING PRECAUTIONS NOTES REGARDING HANDLING OF THE PICK-UP 1. Notes for transport and storage 1) The pick-up should always be left in its conductive bag until immediately prior to use. 2) The pick-up should never be subjected to external pressure or impact. 2. Repair notes 1) The pick-up incorporates a strong magnet, and so should never be brought close to magnetic materials. 2) The pick-up should always be handled correctly and carefully, taking care to avoid external pressure and impact. If it is subjected to strong pressure or impact, the result may be an operational malfunction and/or damage to the printed-circuit board. 3) Each and every pick-up is already individually adjusted to a high degree of precision, and for that reason the adjustment point and installation screws should absolutely never be touched. 4) Laser beams may damage the eyes! Absolutely never permit laser beams to enter the eyes! Also NEVER switch ON the power to the laser output part (lens, etc.) of the pick-up if it is damaged. 5) Cleaning the lens surface If there is dust on the lens surface, the dust should be cleaned away by using an air bush (such as used for camera lens). The lens is held by a delicate spring. When cleaning the lens surface, therefore, a cot- ton swab should be used, taking care not to distort this. 6) Never attempt to disassemble the pick-up. Spring by excess pressure. If the lens is extremely dirty, apply isopropyl alcohol to the cotton swab. (Do not use any other liquid cleaners, because they will damage the lens.) Take care not to use too much of this alcohol on the swab, and do not allow the alcohol to get inside the pick-up. Storage in conductive bag NEVER look directly at the laser beam, and dont let contact fingers or other exposed skin. Magnet How to hold the pick-up Conductive Sheet Cotton swab Pressure Pressure Drop impact HS100 HS100 Integrated Home Theater System harman/kardon RadioFans.CN NOTES REGARDING COMPACT DISC PLAYER REPAIRS 1. Preparations 1) Compact disc players incorporate a great many ICs as well as the pick-up (laser diode). These compo- nents are sensitive to, and easily affected by, static electricity. If such static electricity is high voltage, components can be damaged, and for that reason components should be handled with care. 2) The pick-up is composed of many optical components and other high-precision components. Care must be taken, therefore, to avoid repair or storage where the temperature of humidity is high, where strong magnetism is present, or where there is excessive dust. 2. Notes for repair 1) Before replacing a component part, first disconnect the power supply lead wire from the unit 2) All equipment, measuring instruments and tools must be grounded. 3) The workbench should be covered with a conductive sheet and grounded. When removing the laser pick-up from its conductive bag, do not place the pick-up on the bag. (This is because there is the possibility of damage by static electricity.) 4) To prevent AC leakage, the metal part of the soldering iron should be grounded. 5) Workers should be grounded by an armband (1M) 6) Care should be taken not to permit the laser pick-up to come in contact with clothing, in order to prevent static electricity changes in the clothing to escape from the armband. 7) The laser beam from the pick-up should NEVER be directly facing the eyes or bare skin. Resistor (1 Mohm) Conductive Sheet Resistor (1 Mohm) Armband HS100 HS100 Integrated Home Theater System harman/kardon RadioFans.CN ESD PRECAUTIONS Electrostatically Sensitive Devices (ESD) Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components com- monly are called Electrostatically Sensitive Devices (ESD). Examples of typical ESD devices are integrated cir- cuits and some field-effect transistors and semiconductor chip components. The following techniques should be used to help reduce the incidence of component damage caused by static electricity. 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging wrist strap device, which should be removed for potential shock reasons prior to applying power to the unit under test. 2. After removing an electrical assembly equipped with ESD devices, place the assembly on a conductive sur- face such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly. 3. Use only a grounded-tip soldering iron to solder or unsolder ESD devices. 4. Use only an anti-static solder removal device. Some solder removal devices not classified as anti-static can generate electrical charges sufficient to damage ESD devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ESD devices. 6. Do not remove a replacement ESD device from its protective package until immediately before you are ready to install it. (Most replacement ESD devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive materials). 7. Immediately before removing the protective material from the leads of a replacement ESD device, touch the protective material to the chassis or circuit assembly into which the device will by installed. CAUTION : BE SURE NO POWER IS APPLIED TO THE CHASSIS OR CIRCUIT, AND OBSERVE ALL OTHER SAFETY PRECAUTIONS. 8. Minimize bodily motions when handing unpackaged replacement ESD devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can gen- erate static electricity sufficient to damage an ESD device). 4 H HS S100 100 Integrated Home Theater System harman/kardon SPECIFICATIONS 33 DVD Player Pickup:Semiconductor laser, wavelength 650nm Video signal system:NTSC Video signal horizontal resolution:480 lines (DVD) Video signal-to-noise ratio:60dB (DVD) Audio frequency response:DVD (PCM): 20Hz 22kHz (1dB) (Stereo) CD (PCM): 20Hz 20kHz (1dB) Audio signal-to-noise ratio:80dB (PCM) Total harmonic distortion:85dB (EIAJ, 2kHz) CD: 85dB (EIAJ) FM Tuner System:PLL quartz-locked digital synthesizer system Tuning range:87.50 108.00MHz Antenna terminals:75 Ohms, unbalanced Intermediate frequency:10.7MHz AM Tuner Section Frequency range:520 1720kHz Signal-to-noise ratio:45dB Usable sensitivity:Loop 500V Distortion:1kHz, 50% Mod 0.8% Selectivity:10kHz, 30dB Video Outputs Component video output:Y: 1 Vp-p/75 ohms, sync negative polarity Pr: 0.7 Vp-p/75 ohms Pb: 0.7 Vp-p/75 ohms Composite video output:1 Vp-p/75 ohms S-video output:Y: 1 Vp-p/75 ohms C: NTSC 0.286 Vp-p/75 ohms Audio Section Amplifer power:35 watts per channel, 20Hz 20kHz, <0.5% THD into 6 ohms Line output:1 Vrms, 1 kilohm General Power requirements:AC 120V, 50Hz Power consumption:3W Standby, 380W Maximum Dimensions (HxWxD):2-11/16 x 17-15/16 x 2-3/16 Weight:10.6 lb HS 100 SPECIFICATIONS Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis. All features and specifications are subject to change without notice. Harman Kardon and Power for the Digital Revolution are registered trademarks of Harman International Industries, Incorporated. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories, registered in the United States and/or other countries.All rights reserved. DTS is a trademark of DTS, Inc. * Windows MediaAudio (WMA) is a proprietary file format developed by Microsoft. Microsoft,Windows and Windows Media are registered trademarks of Microsoft Corporation in the United States and/or other countries. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Supplied Accessories The following accessory items are supplied with the HS 100 controller. If any of these items are missing, please contact Harman Kardon customer service at . A system remote control An AM loop antenna An FM wire antenna Three AAA batteries AC power cord HS 100 SPECIFICATIONS 5 H HS S100 100 Integrated Home Theater System harman/kardon 1 2 3 4 5 6 8 9 10 11 7 12 2 13 No. Part No. DescriptionQty. 101.00.BZ.X.W.E232Carton box HS100 EU version1 01.00.BZ.X.W.E231Carton box HS100 US version1 2Barcord label1 301.00.YS.SM1.E261Owner manual HS100 US version1 01.00.YS.SM1.E262Owner manual HS100 EU version1 4 Plastic bag for manual 25*35cm 1 501.00.YS.FY3.345Safety instruction manual HS100 EU 1 01.00.YS.FY3.346Warning card HS100 US version1 01.00.YS.FY3.347Guarantee card HS100 US version1 601.47.CNT.CTX.042AM antenna AM- 300- AWM1 701.47.CNT.CTX.037FM antenna FM- 0751 01.47.CNT.CTX.038FM antennab FM- TV- 75- A1 801.47.CNT.LJX.5.012SCART cable1 901.47.CNT.ACX.E052AC power cord EU version1 01.47.CNT.ACX.E053AC power cord US version1 10 01.00.RC.100Remote control HS100 1 11 Plastic bag for RC 9*27.5cm 1 12 01.14.DX.B.0007battery 7# battery3 13 Plastic bag for battery 6*9c1 14 accessories box 1 15accessories Polyfoam2 01.00.BZ.F.P.E100Polyfoam HS100- left1 01.00.BZ.F.P.E101Polyfoam HS100- right1 16Main unit1 17 Plastic bag for unit 54.5*60cm 1 15 15 17 18 16 15 PDF created with pdfFactory trial version 6 HS100 HS100 Integrated Home Theater System harman/kardon FRONT-PANEL CONTROLSFRONT-PANEL CONTROLS FRONT-PANEL CONTROLS 5 5 8 ?1 A9 23456 7 B JPEG MP3 VCD DVD WMA GROUP PLAYER RADIO AUX DIGITAL IN CD TITLE DVD-AUDIO TRACK 5.1ch CHAP PROGRAND HOUR REP PBC 1 ALL V.OFF A-B MIN P.SCAN SEC TEST NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product at . ?Power On/Off (Standby): When the HS 100 is connected to AC power, the ring around this button will glow amber, indicating that the unit is in Standby and is ready to be turned on. Press this button (or the Power On Button 0 on the remote control) to turn the unit on.When the unit is on, the amber illumination around the button turns blue and the lighting surround- ing the Volume Control A will turn blue. 1Open/Close: Press this button to open or close the Disc Tray. 2Skip (Previous): Press this button to move backward through the music tracks on a CD or the chapters on a DVD. 3Skip (Next): Press to move forward through the music tracks on a CD or the chapters on a DVD. 4Play/Pause: Press to initiate playback or to momentarily pause playback.To resume playback, press the button again. If a DVD is playing, action will freeze and a still picture will be displayed when the button is pressed. 5Stop: Press this button once to place the disc in the Resume mode, which means that playback will stop; but as long as the tray is not opened, DVD play- back will continue from the same point on the disc when the Play button is pressed again. Resume will also work if the unit was turned off.When this button is pressed twice, playback of the disc will restart at the beginning of the disc. 6Source: Press this button repeatedly to scroll through the available audio and video sources. 7Headphone Jack: This jack may be used to listen to the systems output through a pair of headphones with a standard 3.5mm stereo mini plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use. 8Information Display: This display delivers mes- sages and status indications to help you operate the HS 100 controller. 9 Remote Sensor: The infrared sensor that receives commands from the remote control is behind the front-panel lens in this area.To ensure proper operation of the HS 100, it is important that this area is not blocked or covered. AVolume Control: Turn this knob clockwise to increase the volume, counterclockwise to decrease the volume. If the HS 100 is muted, adjusting the volume control will automatically release the unit from the silenced condition. B Disc Drawer: This drawer holds the discs played in the HS 100. Be certain to properly seat all discs carefully in the recess in the drawer tray. Do not press down on the drawer when it is open, as this will damage the player. ?Power On/Off (Standby) 1Open/Close 2Skip (Previous) 3Skip (Next) 4Play/Pause 5Stop 6Source 7Headphone Jack 8Information Display 9Remote Sensor AVolume Control BDisc Drawer 7 H HS S100 100 Integrated Home Theater System harman/kardon FRONT-PANEL DISPLAY 6 FRONT-PANEL DISPLAY JPEG MP3 VCD DVD WMA GROUP PLAYER RADIO AUX DIGITAL IN CD TITLE DVD-AUDIO TRACK 5.1ch CHAP PROGRAND HOUR REP PBC 1 ALLA-B MIN P.SCAN SEC TEST N A MOL BC DEIKGFHJ NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product at . A Disc Type Indicators B Program Indicator C Random Indicator D VCD Playback Control Indicator E Repeat Indicators F Time Indicators G A-B Repeat Indicator H Angle Indicator I Progressive Scan Indicator J Parental Lock Indicator K Test Indicator L Source Indicators M Playback-Mode Indicators N Title Indicators O Chapter/Track Number Indicators ADisc Type Indicators: The CD, DVD or DVD-Audio indicator will light to show the type of disc currently being played. B Program Indicator: This indicator lights when the programming functions are in use. C Random Indicator: This indicator lights when the unit is in the Random Play mode. D VCD Playback Control Indicator: This indicator lights when the playback control function is turned on with V