HarmanKardon-HS210.230-hcs-sm维修电路原理图.pdf
harman/kardon Service Manual HS 2X0/230 (HS 210 system and HS 280 system) 2 x 65W 2.1 RECEIVER / HOME CINEMA SYSTEMS CONTENTS ELECTRICAL PARTS LIST 13 SEMICONDUCTOR PINOUTS 19 PCB DRAWINGS 42 BLOCK DIAGRAM 52 WIRING DIAGRAM 53 REVISION HISTORY 54 SCHEMATIC DIAGRAMS 56-73 FEATURES 2 ACESSORIES 3 FRONT AND REAR PANELS 4 REMOTE CONTROL 8 TROUBLESHOOTING GUIDE 9 BASIC SPECIFICATIONS 10 EXPLODED VIEW AND PARTS 11 PACKAGE LISTS AND PARTS 12 NOTE: The HS 210 and HS 280 systems DVD/amplifier units are identical, named “HS 2X0” on the rear panel, but featuring NO NAME-STICKER on the front panel. The only difference is the loudspeakers included in the system box. HS 210 comes with a HKTS 30 system in 2.1 configuration HS 280 comes with a HKTS 60 system in 2.1 configuration. Please refer to the HKTS 20+30+60 service manual for information on the speakers. Released EU2010 Harman Consumer Group, Inc. Rev 2, 01/2011 8500 Balboa Boulevard Northridge, California 91329 RadioFans.CN Introduction Thank you for choosing the Harman Kardon HS 2X0SO/230! In the years since Harman Kardon invented the high-fidelity receiver, we have taken to heart this philosophy: Bring the joy of home entertainment to as many people as possible, adding performance and ease-of-use features that enhance the experience. With the introduction of the HS series of home-entertainment systems, Harman Kardon offers a complete home-entertainment solution with a wealth of listening and viewing options in one sleek component. Each HS series system also includes a 5.1-channel or 2.1-channel loudspeaker system, a system remote control and all the cables and accessories you need to enjoy movies and music in your own home, when you use them with your television or video display. To get the maximum enjoyment from your new HS system, we urge you to read this manual thoroughly and refer back to it as you become more familiar with your new systems features and their operation. If you have any questions about this product, its installation or its operation, please contact your retailer or custom installer, or visit our Web site at . HS 2X0SO/230 Two-Channel DVD Receiver Audio Section 65 watts x 2 continuous power at 6 ohms (both channels driven), 20Hz 20kHz, <0.5% THD (total harmonic distortion) Audio Modes Dolby Digital Dolby Virtual Speaker Stereo Analog-Audio Inputs FM tuner (internal) DVD player (internal) Two left/right (L/R) line input connectors L/R input via SCART Analog-Audio Outputs Headphone output Subwoofer output One L/R line output connector Digital Audio Inputs Two coaxial Two optical Two USB 2.0 ports Digital Audio Outputs One coaxial Video Inputs DVD player (internal) Video Outputs One HDMI (High-Definition Multimedia Interface) version 1.2 One S-Video One composite video S-Video and composite video via SCART Speaker Outputs Front left and front right Control Inputs/Outputs Subwoofer trigger output Infrared (IR) remote control input Infrared (IR) remote control output Ease of Use On-screen menu system Dot-matrix front-panel information display Learning remote control (also controls your TV and a video component) DVD Player Features Region 2 coding Plays five-inch (12cm) and 3-inch (8cm) discs Video formats supported: DVD, DVD-R, DVD-RW, DVD+R/RW, VCD, SVCD Audio formats supported: Dolby Digital, CD, CD-R/RW, MP3, WMA (v7-v8) Still-image formats supported: JPEG Video upscaling to 720p and 1080p (HDMI output only) Progressive-scan video output (HDMI only) MP3 bit rates: 32kbps 320kbps WMA bit rates: 16kbps 192kbps JPEG resolution supported: Five megapixels, 5MB file size Still-image rotation in 90-degree increments Fast Play rates: 2x, 4x, 8x, 16x, 32x Slow Play rates: 1x, 2x, 4x, 8x Random Play Repeat Play: One group/title, one track/chapter, one folder, one disc Disc recognition for up to 100 discs Playback control for VCDs Aspect-ratio adjustment SAT TS60 Satellite Speakers (for HS 280) One 1 (25mm) CMMD Lite dome video-shielded tweeter Two 3 (75mm) flat-diaphragm, video-shielded, midrange drivers 20 150 watts recommended power SAT TS11 Satellite Speakers (for HS 210) One 1/2 (12mm) dome, video-shielded tweeter Dual 3 (75mm) drivers, video-shielded, midrange 10 120 watts recommended power HKTS200SUB Subwoofer 8 (200mm) woofer in a sealed enclosure 200 watts RMS amplifier power Automatic turn-on and turn-off Please register your product on our Web site at . Note: Youll need the products serial number. At the same time, you can choose to be notified about our new products and/or special promotions. 4 4 NOTE: The built-in DVD player is designed and manufactured for compatibility with Region Management Information that is encoded on most DVDs. This player is designed only for playback of discs with Region Code 2 information or discs that do not contain Region Code information. If there is any other Region Code on a disc, it will not play in the HS 2X0SO/230. 1 2 RadioFans.CN Supplied Accessories (for HS 280) The following accessory items are supplied with the HS 280 system. If any of these items are missing, please contact Harman Kardon Customer Service via . System remote control HDMI cable SCART cable FM wire antenna Two speaker Two five-meter (16.4-foot) wall-mount brackets speaker cables One combination LFE 2 TS-60 Satellites (low-frequency effects) and trigger cable for connection to the subwoofer Supplied Accessories (for HS 210) The following accessory items are supplied with the HS 210 system. If any of these items are missing, please contact Harman Kardon Customer Service via . System remote control HDMI cable SCART cable FM wire antenna 2 TS-11 satellite speakers Two five-meter (16.4-foot) speaker cables 5 Two wall-mount brackets One combination LFE (low-frequency effects) and trigger cable for connection to the subwoofer RadioFans.CN 6 Receiver Front-Panel Controls Phones Volume EjectStandby PRO LOGIC II VIRTUAL SPEAKER DOLBY DIGITAL DOLBY DIGITAL Information Display Disc SlotVolume ControlUSB Port Headphone Jack Eject Button Standby Button Power Indicator TOP FRONTSIDE Disc Slot: Insert a compatible disc into the slot. The HS 2X0SO/230s disc player will accept five-inch (12cm) and three-inch (8cm) discs. Information Display: Various messages appear on this display in response to commands. In addition, a variety of indicators will light at various times to show the current source, settings or other aspects of the HS 2X0SO/230s status as described throughout this manual. See Receiver Information Display, on page 7, for details. Volume Control: Rotate the disc clockwise to raise the volume; rotate counterclockwise to lower the volume. The volume level will appear on the Information Display and on the on-screen menu (if the menu is enabled, see Preferences Volume Bar, on page 20). Eject Button (on top of unit): Press this button to eject a disc from the HS 2X0SO/230s built-in DVD player. Before pressing this button, make sure that no objects are blocking the disc slot. NOTE: If you do not remove the ejected disc within 20 seconds, it will automatically re-load back into the DVD player for protection. Standby Button (on top of unit): This button turns the HS 2X0SO/230 on for playback or leaves it in the Standby mode for quick turn-on using this button or the remote control. Power Indicator: This LED (light-emitting diode) surrounds the Standby switch. When the HS 2X0SO/230 is plugged into AC power, the LED turns red to indicate that the HS 2X0SO/230 is in Standby mode (ready to be turned on). When you turn the HS 2X0SO/230 on (by the Standby switch or the remote control), the LED turns white. Phones (headphones) Jack (on side of unit): Insert the 3.5mm stereo mini-connector from a set of headphones into this jack. NOTE: When a plug is inserted into the Phones jack, the HS 2X0SO/230s speaker outputs automatically mute; the HDMI audio output, coaxial output and line output remain active. USB 2.0 Port (on side of unit): Gently insert a flash drive, card reader, digital camera or other USB device, or a USB Standard-A cable connected to a USB device, to this port. IMPORTANT: DO NOT connect a PC or other USB host/controller to this port, or you may damage both the HS 2X0SO/230 and your other device. Orient the other devices plug so it fits all the way into the HS 2X0SO/230s USB connector. You may insert or remove the device at any time there is no installation or ejection procedure. The HS 2X0SO/230 can play MP3 and Windows Media Audio WMA audio files that are stored on the device. The HS 2X0SO/230 can also display JPEG-format still-image files. harman/kardonHS 2X0/230 Service Manual Page 4 of 73 7 Receiver Information Display Source Indicators: Indicate which source is currently playing. Disc Type Indicators: Indicate the type of disc that is currently playing. Random Play Indicator: Indicates that the disc player is in the Random Play mode. Dolby Digital Indicator: Indicates that the soundtrack of the currently-playing disc is Dolby Digital-encoded. Progressive Scan Indicator: Indicates that the disc player is outputting a progressive-scan video signal. Repeat Play Indicators: Indicate that the disc player is in one of the Repeat Play modes: Rep. = repeat all; Rep. 1 = repeat track; AB = A/B repeat. Video Output Indicators: Indicate which type of video output is currently active. Angle Indicator: Indicates when alternative viewing angles are available on the currently-playing DVD. Video Format Indicators: Indicate which video format is currently playing. VCD Playback Control Indicator: Indicates that the playback-control function is turned on when the HS 2X0SO/230 is playing a VCD. Playback Mode Indicators: Indicate the current disc playback mode: Indicates normal playback. Indicates that the disc is in the forward fast-search mode. The video display will indicate the selected speed. Indicates that the disc is paused. The video display will also indicate that the disc is paused. Indicates that the disc is in the reverse fast-search mode. The video display will indicate the selected speed. Title Indicators: Show the title number of a DVD that is playing. Chapter/Track Number Indicators: Show the current chapter when a DVD is playing; show the current track number when a CD is playing. Time Indicators: Show the running time when a DVD is playing; show elapsed time when a CD is playing. NOTE: The Title, Chapter/Track Number and Time Indicators will also display the radio station name when Radio is the selected input. When a DVD or CD is playing, the indicators will display various text mes- sages about the discs status. VCD Playback Control Indicator Playback Mode Indicators Disc Type Indicators Random Play Indicator Title Indicators Chapter/Track Number Indicators Time Indicators Source Indicators Dolby Digital Indicator Repeat Play Indicators Progressive Scan Indicator Video Output Indicators Angle Indicator Video Format Indicators harman/kardonHS 2X0/230 Service Manual Page 5 of 73 8 MODEL: HS 2X0SO/230 Speaker Outputs Coaxial Digital Inputs Optical Digital Inputs Subwoofer Output Coaxial Digital Output AC Power Input Sub Trigger Output Line Outputs Line 2 Inputs SCART Connection FM Antenna Connection Line 1 Inputs Ethernet Port USB Port HDMI Output Composite Video Output S-video Output Remote Control Input/Output Receiver Rear-Panel Connections See the Connections section, on page 14, for detailed information about making connections. AC Power Input: After you have made and confirmed all other connections, plug the supplied AC power cord into this input and into an unswitched AC outlet. Speaker Outputs: Use the speaker wires supplied with the SAT TS60 speakers to connect the satellite speakers to the proper terminals. Be sure to connect the positive (+, colored red) connector on the speaker to the positive (+, colored red and white) connector on the HS 2X0SO/230, and the negative ( , colored black) connectors on the speakers to the negative (, colored black) connectors on the HS 2X0SO/230. See Connecting the Satellite Speakers, on page 14, for more information about making connections. Coaxial Digital Inputs: Connect the coaxial digital output of an audio-only source component here. The signal may be a Dolby Digital bitstream or a standard PCM digital audio bitstream. NOTE: Use only one type of digital connection for each source component. Optical Digital Inputs: Connect the optical digital output of an audio-only source component here. The signal may be a Dolby Digital bitstream or a standard PCM digital audio bitstream. NOTE: Use only one type of digital connection for each source component. Coaxial Digital Output: Connect this output to the coaxial digital input of a digital recording device such as a CD-R or MiniDisc recorder. Sub Trigger Output: Use the black mini-cable connector of the supplied combination LFE and trigger cable to connect this jack to the HKTS200SUB subwoofers External Trigger Input. See Connecting the Subwoofer, on page15, for more details about making connections. Whenever the HS 2X0SO/230 is turned on, it will send a trigger signal that will turn the subwoofers amplifier on. Turning the HS 2X0SO/230 off removes the trigger signal, and the subwoofers amplifier will turn off. (This change will occur even when the subwoofers Power On Mode switch see page 9 is in the Auto position.) Subwoofer Output: Use the LFE (purple) connector of the supplied combination LFE and trigger cable to connect this jack to the HKTS200SUB subwoofers Line-Level In LFE jack. See Connecting the Subwoofer, on page 15, for more details about making connections. Ethernet Port: Connect this port to your local area network (LAN) using a CAT 5 RJ45 network cable. See Connecting to a Local Area Network (LAN), on page 17, for details. Line Outputs: Use the Line Outputs to connect to an audio-only re- corder, such as a CD-R recorder or tape deck. USB 2.0 Port: Gently insert a flash drive, card reader, digital camera or other USB device, or a USB Standard-A cable connected to a USB device, to this port. IMPORTANT: DO NOT connect a PC or other USB host/controller to this port, or you may damage both the HS 2X0SO/230 and the other device. Orient the devices plug so it fits all the way into the HS 2X0SO/230s USB connector. You may insert or remove the device at any time there is no installation or ejection procedure. The HS 2X0SO/230 can display JPEG-format still-image files stored on the device and can also play MP3 and Windows Media Audio (WMA) files and MPEG4 and AVI video files that are stored on the device. Line 1 Input/Line 2 Inputs: Use these inputs to connect to an audio-o
