Yamaha-RXV-461-DAB-Service-Manual电路原理图.pdf
SERVICE MANUAL 101048 IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. I CONTENTS TO SERVICE PERSONNEL . 2 FRONT PANELS. 3 REAR PANELS . 45 REMOTE CONTROL PANELS. 6 SPECIFICATIONS. 79 INTERNAL VIEW . 10 DISASSEMBLY PROCEDURES . 1012 UPDATING FIRMWARE . 1314 SELF DIAGNOSIS FUNCTION (DIAG) . 1529 DISPLAY DATA . 3031 IC DATA . 3247 BLOCK DIAGRAMS . 4950 PIN CONNECTION DIAGRAMS. 51 PRINTED CIRCUIT BOARDS. 5266 SCHEMATIC DIAGRAMS. 6780 REPLACEMENT PARTS LIST . 8191 REMOTE CONTROL. 9293 Advanced setup . 94 P.O.Box 1, Hamamatsu, Japan 2007 All rights reserved. This manual is copyrighted by YAMAHA and may not be copied or redistributed either in print or electronically without permission. 07.07 RX-V461/HTR-6040/ RX-V461DAB This service manual is the RX-V461/HTR-6040/RX-V461DAB (T, B, G and E models). For the RX-V461/HTR-6040/DSP-AX461 (U, C, R, K, A, L and J models) service manual, please refer to the following service manual: RX-V461/HTR-6040/DSP-AX461 (U, C, R, K, A, L and J models): 101041 For T, B, G and E models AV RECEIVER RX-V461/HTR-6040/ RX-V461DAB RX-V461/HTR-6040/RX-V461DAB 2 RX-V461/HTR-6040/ RX-V461DAB WALL OUTLET EQUIPMENT UNDER TEST AC LEAKAGE TESTER OR EQUIVALENT INSULATING TABLE I TO SERVICE PERSONNEL 1. Critical Components Information Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohms shunted by 0.15F. GLeakage current must not exceed 0.5mA. GBe sure to test for leakage with the AC plug in both polarities. WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA- SON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food. All of the P.C.B.s installed in this unit and solder joints are soldered using the lead free solder. Among some types of lead free solder currently available, it is recommended to use one of the following types for the repair work. Sn + Ag + Cu (tin + silver + copper) Sn + Cu (tin + copper) Sn + Zn + Bi (tin + zinc + bismuth) Caution: As the melting point temperature of the lead free solder is about 30C to 40C (50F to 70F) higher than that of the lead solder, be sure to use a soldering iron suitable to each solder. About lead free solder 7 RX-V461/HTR-6040/RX-V461DAB I Audio Section Minimum RMS Output Power (Power Amp. Section) FRONT L/R, CENTER, SURROUND L/R 1 kHz, 0.9 % THD, 6 ohms . 100 W/ch Maximum Power (JEITA) FRONT L/R, CENTER, SURROUND L/R 1 kHz, 10 % THD, 6 ohms . 135 W/ch Dynamic Power Per Channel (IHF) 6/4/2 ohms . 105/130/150 W Input Sensitivity/Input Impedance (1 kHz, 100 W, 8 ohms) CD, etc. . 200 mV / 47 k-ohms MULTI CH INPUT FRONT L/R, CENTER, SURROUND L/R, SUBWOOFER . 200 mV / 47 k-ohms Maximum Input Signal (1 kHz, 0.5 % THD, Effect on) CD, etc. .2.0 V or more Output Level/Output Impedance REC OUT . 200 mV / 1.2 k-ohms SUBWOOFER (2 ch STEREO and FRONT SP: Small) . 4 V / 1.2 k-ohms Headphone Jack Rated Output/Impedance CD, etc. (1 kHz, 200 mV, 8 ohms) . 0.4 V / 470 ohms Frequency Response (10 Hz to 100 kHz) CD, etc. to FRONT L/R. 0 / -3.0 dB Total Harmonic Distortion (Direct stereo to FRONT L/R SP OUT) 1 kHz, 50 W, 6 ohms .0.06 % or less Signal to Noise Ratio (IHF-A Network) (Direct stereo to input shorted SP OUT) 200 mV.98 dB or more 250 mV.100 dB or more Residual Noise (IHF-A Network) FRONT L/R SP OUT . 150 V or less Channel Separation (Input 5.1 k-ohms shorted, 1 kHz / 10 kHz) CD, etc. . 60 dB or more / 45 dB or more Tone Control Characteristics BASS Boost/Cut . 10 dB (100 Hz) TREBLE Boost/Cut . 10 dB (20 kHz) Filter Characteristics FRONT, CENTER, SURROUND, SURROUND BACK small (H.P.F.) . fc=40/60/80/90/100/110/120/160/200 Hz, 12 dB/oct. SUBWOOFER (L.P.F.) . fc=40/60/80/90/100/110/120/160/200 Hz, 24 dB/oct. Multimedia (USB) Applications T, G, E models .Connections USB mass storage class device Playback Formats (USB device) T, G, E models . WAV (PCM format), MP3, WMA Supported USB Devices (FAT16 or FAT32 format) T, G, E models .USB memory device, Portable audio player I Video Section Video Signal Type (Gray Back) . PAL Composite Video Signal Level . 1 Vp-p / 75 ohms S-Video Signal Level Y . 1 Vp-p / 75 ohms C.0.286 Vp-p / 75 ohms Component Video Signal Level Y . 1 Vp-p / 75 ohms Pb/Pr .0.7 Vp-p / 75 ohms Video Maximum Input Level . 1.5 Vp-p or more Signal to Noise Ratio (IHF) .50 dB or more Monitor Out Frequency Response (VIDEO CONV. OFF) Component video signal .5 Hz to 60 MHz, -3 dB HDMI (HDMI 1.2a) T, G, E models . Type A (IN x 2, OUT x 1) I FM Section Tuning Range .87.50 to 108.00 MHz 50dB Quieting Sensitivity (IHF) (1 kHz, 100 % Mod.) Mono T, G, E models . 2.8 V (20.2 dBf) B model . 2.0 V (17.3 dBf) Signal to Noise Ratio (IHF) Mono T, G, E models . 73 dB B model . 76 dB Stereo . 70 dB Harmonic Distortion (1 kHz) Mono / Stereo T, G, E models . 0.5 % / 0.5 % B model . 0.2 % / 0.3 % Antenna Input .75 ohms unbalanced I AM Section Tuning Range . 531 to 1,611 kHz Sensitivity (B model) . 300 V/m Antenna Input . Loop antenna I DAB Section (B model) Tuning Range Band III . 174 to 240 MHz L-Band. 1,452 to 1,492 MHz Sensitivity Band III . -99 dBm L-Band. -95 dBm Selectivity (For adjacent channel) Band III / L-Band . 40 dB Signal to Noise Ratio . 97 dB Total Harmonic Distortion . 0.01 % Stereo Separation 1 kHz . 95 dB Frequency Response 20 Hz to 20 kHz .+0.5/-0.5 dB Antenna Input .75 ohms unbalanced I General Power Supply T model .AC 220 V, 50 Hz B, G, E models.AC 230 V, 50 Hz Power Consumption . 240 W Standby Power Consumption (reference data) . 0.8 W I SPECIFICATIONS DIMENSIONS Unit: mm (inch) Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Surround” are registered trademarks of DTS, Inc. “SILENT CINEMA” is a trademark of YAMAHA CORPORATION. AC Outlets 2 switched outlets T model . 100 W max. total G, E models . 50 W max. total 1 switched outlet B model . 50 W max. total Dimensions (W x H x D) . 435 x 151 x 317.6 mm (17-1/8 x 5-15/16 x 12-1/2) Weight . 8.1 kg (17 lbs. 14 oz.) Finish RX-V461 Gold color .T model Black color.G, E models Titanium color .G, E models HTR-6040 Gold color .T model Black color. G model Silver color .G, E models RX-V461DAB Black color. B model Titanium color . B model Accessories Remote control x 1, Batteries (R03, AAA, UM-4) x 2, Indoor FM an- tenna x 1, AM loop antenna x 1, Optimizer microphone x 1, DAB wire antenna x 1 (B model) *Specifications are subject to change without notice due to product improvements. T . Chinese modelB . British model G . European modelE . South European model “HDMI”, the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks or registered trademarks of HDMI Licensing LLC. 151 (5-15/16) 130 (5-1/8)274.9 (10-13/16) 21 (13/16) 21 (13/16) 21.7 (7/8) 317.6 (12-1/2) 435 (17-1/8) “iPod” is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. The “DAB Digital Radio” logo and the stylised “r” mark and Digital One Limited. This receiver supports DAB tuning. RX-V461/HTR-6040/RX-V461DAB 8 ProgramSelect (Default) SCENE TEMPLATE SOUND/SURROUND SELECT MENU Sound Field Parameters DVD Viewing DVD Movie Viewing DVD Live Viewing DVR Viewing Dis
