Yamaha-RXV-350-Service-Manual电路原理图.pdf
SERVICE MANUAL 100883 IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. P.O.Box 1, Hamamatsu, Japan I CONTENTS TO SERVICE PERSONNEL . 2 FRONT PANELS. 34 REAR PANELS . 48 REMOTE CONTROL PANELS. 8 SPECIFICATIONS. 911 INTERNAL VIEW . 12 DISASSEMBLY PROCEDURES . 1214 SELF DIAGNOSIS FUNCTION (DIAG) . 1531 CONFIRMATION OF IDLING CURRENT . 32 DISPLAY DATA . 3334 IC DATA . 3540 PRINTED CIRCUIT BOARD . 4148 PIN CONNECTION DIAGRAM . 4950 BLOCK DIAGRAM. 51 SCHEMATIC DIAGRAM . 5256 PARTS LIST. 5771 REMOTE CONTROL. 7273 AV RECEIVER RX-V350/HTR-5730 RX-V350/HTR-5730 RX-V350/HTR-5730 2 RX-V350/HTR-5730 WALL OUTLET EQUIPMENT UNDER TEST AC LEAKAGE TESTER OR EQUIVALENT INSULATING TABLE I TO SERVICE PERSONNEL 1. Critical Components Information Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohm shunted by 0.15F. GLeakage current must not exceed 0.5mA. GBe sure to test for leakage with the AC plug in both polarities. WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA- SON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food. “CAUTION” “F371: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 6A, 125V FUSE.” CAUTION F371: REPLACE WITH SAME TYPE 6A, 125V FUSE. ATTENTION F371: UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE DE 6A, 125V. The P.C.B.s installed in this unit are soldered using the following solder. About Lead Free Solder Among some types of lead free solder currently available, it is recommended to use one of the following types for the repair work. Sn + Ag + Cu (tin + silver + copper) Sn + Cu (tin + copper) Sn + Zn + Bi (tin + zinc + bismuth) Component SideFoil Side DSP P.C.B.Lead SolderLead Free Solder FUNCTION P.C.B.Lead Free Solder MAIN P.C.B.Lead Free Solder Caution: 1. As the melting point temperature of the lead free solder is about 30C to 40C (50F to 70F) higher than that of the lead solder, be sure to use a soldering iron suitable to each solder. 2. If lead solder must be used, be sure to remove lead free solder from each terminal section of the parts to be replaced and from the area around it completely before soldering, or make sure that the lead free solder and lead solder melt together fully. RX-V350/HTR-5730 3 RX-V350/HTR-5730 I FRONT PANELS RX-V350 (C, L, R, K models) RX-V350 (B, G, E models) HTR-5730 (U, C, A, L, R, T, K models) RX-V350/HTR-5730 4 RX-V350/HTR-5730 I REAR PANELS RX-V350 (B, G, E models) RX-V350 (C model) HTR-5730 (G, E models) RX-V350/HTR-5730 5 RX-V350/HTR-5730 RX-V350 (L model) RX-V350 (R model) RX-V350 (T model) RX-V350/HTR-5730 6 RX-V350/HTR-5730 HTR-5730 (U, C models) HTR-5730 (A model) RX-V350 (K model) RX-V350/HTR-5730 7 RX-V350/HTR-5730 HTR-5730 (G, E models) HTR-5730 (T models) HTR-5730 (R models) RX-V350/HTR-5730 8 RX-V350/HTR-5730 I REMOTE CONTROL PANELS RX-V350 (C, L, R, K models) HTR-5730 (U, C, A, R, T, K models) RX-V350 (B, G, E models) HTR-5730 (G, E models) HTR-5730 (K model) RX-V350/HTR-5730 9 RX-V350/HTR-5730 I SPECIFICATIONS I Audio Section Minimum RMS Output Power (Power Amp. Section) (1 kHz, 0.1 % THD, 6 ohms) FRONT L/R U, C models. 100 W + 100 W A, B, G, E, L, R, T, K models . 90 W + 90 W CENTER U, C models. 100 W A, B, G, E, L, R, T, K models . 90 W SURROUND L/R U, C models. 100 W + 100 W A, B, G, E, L, R, T, K models . 90 W + 90 W (1 kHz, 0.7 % THD, 6 ohms) FRONT L/R U, C models. 103 W + 103 W A, B, G, E, L, R, T, K models . 93 W + 93 W CENTER U, C models. 103 W A, B, G, E, L, R, T, K models . 93 W SURROUND L/R U, C models. 103 W + 103 W A, B, G, E, L, R, T, K models . 93 W + 93 W Maximum Power (EIAJ, 1 kHz, 10 % THD, 6 ohms) FRONT L/R R, T, K models. 110 W + 110 W CENTER R, T, K models. 110 W SURROUND L/R R, T, K models. 110 W + 110 W DIN Standard Output Power Per Channel B, G, E, L models (1 kHz, 0.7 % THD, 4 ohms) FRONT L/R . 105 W + 105 W CENTER. 105 W SURROUND L/R . 105 W + 105 W IEC Power B, G, E, L models 1 kHz, 0.1 % THD, 6 ohms . 90 W + 90 W Dynamic Power Per Channel (IHF) U, C models (6/4/2 ohms) .110/140/170 W A, B, G, E, L, R, T, K models (6/4/2 ohms) .105/135/165 W Dynamic Headroom U, C models 6 ohms. 0.41 dB Input Sensitivity / Input Impedance CD, etc. .200 mV / 47 k-ohms EXT. DECODER FRONT L/R, CENTER, SURROUND L/R, SUB WOOFER .200 mV / 47 k-ohms Maximum Input Signal Level (1 kHz, 0.5 % THD, Effect On) CD, etc. . 2.0 V or more Output Level / Output Impedance REC OUT .200 mV / 1.2 k-ohms SUB WOOFER (FRONT SP: Small). 4 V / 1.2 k-ohms Headphone Jack Rated Output / Impedance CD, etc. (1 kHz, 200 mV, 8 ohms) . 0.4 V / 470 ohms Frequency Response CD, etc. to FRONT L/R (10 Hz to 100 kHz) .0 / -3.0 dB Total Harmonic Distortion (1 kHz, 50 W, 6 ohms) CD, etc. (Effect Off) to FRONT L/R SP OUT. 0.06 % or less Signal to Noise Ratio (IHF-A network) CD, etc. (Input shorted, EFFECT OFF) to FRONT L/R SP OUT 250mV . 100 dB or more Residual Noise (IHF-A network) FRONT L/R SP OUT. 150 V or less Channel Separation (Vol -14 dB, Effect Off) CD, etc. (Input 5.1 k-ohms shorted, 1 kHz / 10 kHz) . 60 dB or more / 45 dB or more Tone Control Characteristics BASS Boost/Cut.10 dB (100Hz) TREBLE Boost/Cut. 10 dB (20 kHz) Filter Characteristics FRONT, SURROUND L/R SP Small (H.P.F.). 90 Hz / 12 dB oct. SUBWOOFER (L.P.F.) . 90 Hz / 18 dB oct. I Video Section Video Signal Type U, C, R, K models .NTSC A, B, G, E, L, T models .PAL Video Signal Level .1 Vp-p / 75 ohms Maximum Input Level . 1.5 Vp-p or more Signal to Noise Ratio . 50 dB or more Monitor Out Frequency Response Video Signal Level .5 Hz to 10 MHz, -3 dB I FM Section Tuning Range U, C models .87.5 to 107.9 MHz A, B, G, E, T, K models.87.50 to 108.00 MHz L, R models . 87.5 to 108.0 / 87.50 to 108.00 MHz 50dB Quieting Sensitivity (IHF) (1 kHz, 100 % Mod.) Mono .2.0 V (17.3 dBf) Stereo . 25 V (39.2 dBf) Usable Sensitivity (IHF) Mono .1.0 V (11.2 dBf) RX-V350/HTR-5730 10 RX-V350/HTR-5730 151 (5-15/16) 130 (5-1/8)274.9 (10-7/8) 21 (13/16) 18 (3/4) 21.7 (7/8) 314.6 (12-3/8) 435 (17-1/8) Unit : mm (inch) Selectivity at 400 kHz . 70 dB Signal to Noise Ratio (IHF) Mono / Stereo. 76 dB / 70 dB Harmonic Distortion (1 kHz) Mono/Stereo.0.2 % / 0.3 % Stereo Separation 1 kHz . 42 dB Frequency Response 20 Hz to 15 kHz. +0.5 / -2 dB Antenna Input .75 ohms unbalanced I AM Section Tuning Range U, C models .530 to 1,710 kHz A, B, G, E, T, K models. 531 to 1,611 kHz L, R models . 530 to 1,710 / 531 to 1,611 kHz Usable Sensitivity . 300 V/m Antenna .Loop Antenna I General Power Supply U, C models . AC 120 V, 60 Hz A model . AC 240 V, 50 Hz B, G, E models . AC 230 V, 50 Hz L, R models . AC 110-120/220-240 V, 50/60 Hz T model . AC 220 V, 50 Hz K model . AC 220 V, 60 Hz Power Consumption U, C models . 240 W / 320 VA A, B, G, E, L, R, T, K models . 240 W Standby Power Consumption (reference data) U, C models . 0.5 W A, B, G, E, T, K models. 0.7 W Maximum Power Consumption R model 5ch Drive, 10 % THD . 510 W Dimensions (W x H x D) . 435 x 151 x 315 mm (17-1/8 x 5-15/16 x 12-7/16) Weight . 9.0 kg (19 lbs. 13 oz.) Finish RX-V350. Gold color (L, T models) Silver color (C, B, G, E, L, R, K models) Black color (B, G, E models) HTR-5730. Gold color (T model) Silver color (U, C, A, G, E, R, T, K models) Black color (U, C, A, G, E, R models) Accessories Remote Control x 1, Batteries (Manganese Dry) x 2, Indoor FM Antenna x 1, AM Loop Antenna x 1 * Specifications are subject to change without notice due to product improvements. U . U.S.A. modelC . Canadian model A . Australian modelB. British model G. European modelE.South European model L. Singapore modelR . General model T . Chinese modelK. Korean model Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. SILENT CINEMA is a trademark of YAMAHA CORPORATION. DIMENSIONS RX-V350/HTR-5730 11 RX-V350/HTR-5730 CategoryNo.MAIN MENUSUB MENUVALUE INITIAL 1SETUPROOM： S M LS/M/L SUBWOOFER YESYES/NONE SPEAKERS 5spk2/3/4/5 SET CANCELSET/CANCEL Check：Test Tone BASICCheck OK? YesYes/No 2SPLEVELFL - RCenter 10step C -Center 10step SL -Center 10step SR -Center 10step SWFR -0dB -20step 1SPEAKER SET1A CENTER SMLLRG/SML/NON 1B FRONT LRGLRG/SML 1C SURR LR SMLLRG/SML/NON 1D BASS BOTHSWFR/FRNT/BOTH 2SP DISTANCEUNITmeters(m)/feet(ft) FRONT L/R 3.00m0.3 to 24m 3.00m/0.1m step CENTER 3.00m0.3 to 24m 3.00m/0.1m step (Effective distance difference 1.5m) SOUNDSURR LR 3.00m0.3 to 24m 3.00m/0.1m step 3LFE LEVELSP LFE 0-20dB to 0dB/1dB step HP LFE 0-20dB to 0dB/1dB step 4D. RANGESP D.R MAXMIN/STD/MAX HP D.R MAXMIN/STD/MAX 5CENTER GEQ100Hz- 0-6dB to +6dB 0dB/1dB step 300Hz- 0-6dB to +6dB 0dB/1dB step 1kHz- 0-6dB to +6dB 0dB/1dB step 3kHz- 0-6dB to +6dB 0dB/1dB step 10kHz- 0-6dB to +6dB 0dB/1dB step 6HP TONE CTRLHP BASS 0-6dB to +3dB 0dB/1dB step HP TRBL 0-6dB to +3dB 0dB/1dB step 1I/O ASSIGN1A (1) DVDDVD, MD/CD-R, CD, VCR, V-AUX, D-TV/CBL INPUT
