Yamaha-DVRS-300-Service-Manual电路原理图.pdf

SERVICE MANUAL 1 0 0 9 6 5 SERVICE MANUAL P.O.Box 1, Hamamatsu, Japan 2005 All rights reserved. This manual is copyrighted by YAMAHA and may not be copied or redistributed either in print or electronically without permission. SERVICE MANUAL DVD HOME THEATER SOUND SYSTEM DVX-S301/DVX-S302 DVR-S300/NX-P301/NX-P302 IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. I CONTENTS TO SERVICE PERSONNEL . 23 PREVENTION OF ELECTROSTATIC DISCHARGE. 4 LOCALE MANAGEMENT INFORMATION . 4 SYSTEM COMPOSITION / 構成 . 5 FRONT PANELS. 67 REMOTE CONTROL. 8 REAR PANELS . 812 SPECIFICATIONS / 参考仕様 . 1315 INTERNAL VIEW . 16 REPAIR NOTES / 修理上留意点 . 17 DVR-S300 TRADE MODE / DVR-S300 . 18 DVR-S300 DISASSEMBLY PROCEDURES / 分解手順. 1921 NX-SW301 DISASSEMBLY PROCEDURES / 分解手順. 2223 DVR-S300 BLOCK DIAGRAM . 25 NX-SW301 BLOCK DIAGRAM. 2627 DVR-S300 WIRING DIAGRAM. 28 NX-SW301 WIRING DIAGRAM . 29 DVR-S300 PRINTED CIRCUIT BOARD . 3037 NX-SW301 PRINTED CIRCUIT BOARD. 3841 DVR-S300 SCHEMATIC DIAGRAM. 4255 NX-SW301 SCHEMATIC DIAGRAM. 5660 NX-SW301 PARTS LIST. 6163 DVR-S300 EXPLODED VIEW . 6465 NX-P301 EXPLODED VIEW . 6667 NX-P302 EXPLODED VIEW . 68 DVR-S300 NX-P301/NX-P302 05.08 RadioFans.CN 收音机爱 好者资料库 DVR-S300/NX-P301/NX-P302 2 DVR-S300 NX-P301/NX-P302 WALL OUTLET EQUIPMENT UNDER TEST AC LEAKAGE TESTER OR EQUIVALENT INSULATING TABLE I TO SERVICE PERSONNEL 1. Critical Components Information Components having special characteristics are marked Z and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohms shunted by 0.15F. GLeakage current must not exceed 0.5mA. GBe sure to test for leakage with the AC plug in both polarities. WARNING: Laser Safety This product contains a laser beam component. This component may emit invisible, as well as visible radiation, which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must be used during servicing of the unit. 1) When testing and/or repairing any component within the product, keep your eyes and skin more than 30 cm away from the laser pick-up unit at all times. Do not stare at the laser beam at any time. 2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere in this manual. 3) CAUTION : Use of controls, adjustments or perfor- mance of procedures other than those specified herein may result in hazardous radiation exposure. WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food. Laser Emitting conditions: 1) When the Top Cover is removed, and the STANDBY/ ON SW is turned to the ON position, the laser component will emit a beam for several seconds to detect if a disc is present. During this time (5-10 sec.) the laser may radiate through the lens of the laser pick- up unit. Do not attempt any servicing during this period! If no disc is detected, the laser will stop emitting the beam. When a disc is loaded, you will not be exposed to any laser emissions. 2) The laser power level can be adjusted with the VR on the pick-up PWB, however, this level has been set by the factory prior to shipping from the factory. Do not adjust this laser level control unless instruction is provided elsewhere in this manual. Adjustment of this control can increase the laser emission level from the device. 警告：安全対策 本機光線放射部品搭載。 部品放射光線目損傷起。 光線目及肌保護、本機 修理作業中下記注意厳守。 1） 時修理時、目及肌光 30c以上離。場合 光線見。 2） 光再調整及分解 。 3） 上指定以外制御、調 整、手順光線照射結果招恐 。 放射条件 1） 取外STANDBY/ONON 、検知510秒間、光 光線放射。間、修 理。 検知、光線放射 停止。場合、 遮光線修理担当者届 。 2） 光基板上VR 調整可能、工場出荷前調整済 、VR廻。VR廻 装置光線放射上恐 。 THE DVD AUDIO/VIDEO PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. RadioFans.CN 收音机爱 好者资料库 DVR-S300/NX-P301/NX-P302 3 DVR-S300 NX-P301/NX-P302 INVISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM CAUTION: INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO THE BEAM DANGER: Laser Diode Properties Type:Semiconductor laser GaAlAs Wave length:650 nm (DVD) 784 nm (VCD/CD) Output Power:7 mW (DVD/VCD/CD) Beam divergence60 degree WARNING The use of optical instruments with this product will increase eye hazard. Repair handling should take place as much as possible with a disc loaded inside the player. CAUTIONVISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. ADVARSELSYNLIG OG USYNLIG LASERSTRLING VED BNING. UNDG UDSTTELSE FOR STRLING. ADVARSELSYNLIG OG USYNLIG LASERSTRLING NR DEKSEL PNES. UNNG EKSPONERING FOR STRLEN. VARNINGSYNLIG OCH OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD. BETRAKTA EJ STRLEN. VARO!AVATTAESSA OLET ALTTIINA NKYVLLE JA NKYMTTMLLE LASER S TEILYLLE. L KATSO STEESEEN. VORSICHTSICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEFFNET. NICHT DEM STRAHL AUSSETSEN. DANGERVISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS DOUVERTURE. EXPOSITION DANGEREUSE AU FAISCEAU Warning for power supply The primary side of the power supply carries live mains voltage when the player is connected to the mains even when the player is switched off ! This primary area is not shielded so it is possible to touch copper tracks and/or components when servicing the player. Service personnel have to take precautions to prevent touching this area or components in this area. Note: The screws on the DVD mechanism may never be touched, removed or re-adjusted. Handle the DVD mechanism with care when the unit has to be exchanged! The DVD mechanism is very sensitive for dropping or giving shocks. VARO!: AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NKYMTTMLLE LASER- STEILYLLE. L KATSO STEESEEN. VARNING! : OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD. BETRAKTA EJ STRLEN. DVR-S300/NX-P301/NX-P302 4 DVR-S300 NX-P301/NX-P302 I PREVENTION OF ELECTROSTATIC DISCHARGE I LOCALE MANAGEMENT INFORMATION Locale Management Information : This DVD player is designed and manufactured to respond to the Locale Management Information that is recorded on a DVD disc. If the Locale number described on the DVD disc does not correspond to the Locale number of this DVD player, this DVD player cannot play this disc. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. q w r w t t r w y e t The laser diode in the traverse unit (optical pickup) may be damaged due to static electricity from clothes or the human body. Use caution to prevent electrostatic damage when servicing or handling the laser diode. 1. Grounding for electrostatic damage prevention 1. Worktable grounding Put a grounded conductive material (sheet) or iron sheet on the area where the optical pickup is placed. 2. Human body grounding Use an anti-static wrist strap to discharge the static electricity from your body. 2. Handling of the optical pickup 1. To prevent damage to the optical pickup replacement parts during transportation and before installation, both ends of the laser diode are short-circuited. After installing the new part, remove the short circuit according to the correct procedure in this service manual. 2. Do not use a tester to check the laser diode in the optical pickup. The power supply in the tester will damage the laser diode. 3. Handling Precautions for the Traverse Unit (Optical Pickup) 1. Handle the traverse unit (optical pickup) gently, as it is an extremely high-precision assembly. 2. The flexible cable lines may break if an excessive force is applied to it. Use caution when handling the cable. 3. The semi-fixed resistor for laser power adjustment should not be adjusted. Do not turn the resistor. 1M Conductive material (sheet) or steel sheet Anti-static wrist strap DVR-S300/NX-P301/NX-P302 5 DVR-S300 NX-P301/NX-P302 I SYSTEM COMPOSITION / 構成 The DVX-S301 consists of the DVR-S300 and the NX-P301. The DVX-S302 consists of the DVR-S300 and the NX-P302. NX-SW301NX-SW301 NX-S301NX-S302 NX-C301 NX-C302 DVR-S300DVR-S300 DVX-S301 (C, K, A, B, G, L, V, J models)DVX-S302 (C, K, A, B, G, L, V models) NX-P301NX-P302 x 4 x 1 x 1 x 4 DVR-S300/NX-P301/NX-P302 6 DVR-S300 NX-P301/NX-P302 I FRONT PANELS DVR-S300 (C, K, A, B, G, L, V models) (J model) NX-SW301 DVR-S300/NX-P301/NX-P302 7 DVR-S300 NX-P301/NX-P302 NX-S301NX-C301 NX-S302NX-C302 DVR-S300/NX-P301/NX-P302 8 DVR-S300 NX-P301/NX-P302 I REAR PANELS DVR-S300 (C model) DVR-S300 (K model) I REMOTE CONTROL C, K, A, B, G, L, V modelsJ model DVR-S300/NX-P301/NX-P302 9 DVR-S300 NX-P301/NX-P302 DVR-S300 (A model) DVR-S300 (B, G models) DVR-S300 (L model) DVR-S300 (V model) DVR-S300 (J model) DVR-S300/NX-P301/NX-P302 10 DVR-S300 NX-P301/NX-P302 NX-SW301 (C model)NX-SW301 (K model) NX-SW301 (A model)NX-SW301 (B, G models) DVR-S300/NX-P301/NX-P302 11 DVR-S300 NX-P301/NX-P302 NX-SW301 (J model) NX-SW301 (L model)NX-SW301 (V model) DVR-S300/NX-P301/NX-P302 12 DVR-S300 NX-P301/NX-P302 NX-S301NX-C301 NX-S302NX-C302 DVR-S300/NX-P301/NX-P302 13 DVR-S300 NX-P301/NX-P302 TUNER SECTION FM Tuning Range - C, K, A, B, G, L, V models87.50 to 108.00 MHz - J model76.0 to 90.0 MHz AM Tuning Range - C model530 to 1700 kHz - K, A, B, G models531 to 1602 kHz - L, V models531 to 1602 kHz/530 to 1700 kHz - J model531 to 1602 kHz DISC SECTION Laser TypeSemiconductor Disc Diametre12cm / 8cm Video DecodingMPEG-1 / MPEG-2 / DivX 3.11, 4.x & 5.x Video DAC12 bits/108 MHz Signal SystemPAL / NTSC Video Format4:3 / 16:9 Composite Video Output1.0 Vp-p, 75 ohms S-video OutputY - 1.0 Vp-p, 75 ohms C - 0.3 Vp-p, 75 ohms RGB (SCART) output0.7 Vp-p, 75 ohms (B, G models) Component Video OutputY - 1.0 Vp-p, 75 ohms PB/CB PR/CR 0.7 Vp-p, 75 ohms Audio DAC24 bits / 192 kHz Frequency Response4 Hz to 20 kHz (44.1 kHz) 4 Hz to 22 kHz (48 kHz) 4 Hz to 44 kHz (96 kHz) Audio S/N105 dB Distortion0.0035 % Dynamic Range95 dB AUDIO FORMAT DigitalDolby Digital/DTS/MPEG Compressed Digital PCM16, 20, 24 bits fs 44.1, 48, 88.2, 96, 176.4, 192 kHz MP3 (ISO 9660)24, 32, 56, 64, 96, 128, 256 kbps fs 16, 22.05, 24, 32, 44.1, 48 kHz WMA32 to 192 kbps, Mono, Stereo Full Decoding of Dolby Digital and DTS Multi-channel Sound Dolby Surround Compatible Downmix from Dolby Digital Multi-chan- nel Sound Dolby Pro Logic II MAIN UNIT (DVR-S300) Power Supply - C model120 V, 60 Hz - K model220 V, 60 Hz - A model240 V, 50 Hz - B, G models230 V, 50 Hz - L model220 - 240 V, 50/60 Hz - V model110 - 120 V, 50/60 Hz - J model100 V, 50/60 Hz Power Consumption15W Frequency Response20 Hz to 20 kHz/-3 dB Signal-to-Noise Ratio 95 dB Input Sensitivity - AUX In, TV In300 mV - SCART In500 mV (B, G models) Dimensions (W x H x D)360 x 53 x 310 mm (14-3/16 x 2-1/16 x 12-3/16) Weight2.7 kg (5 lbs. 15 oz.) FinishSilver Color SUBWOOFER (NX-SW301) Power Supply - C model120 V, 60 Hz - K model220 V, 60 Hz - A model240 V, 50 Hz - B, G models230 V, 50 Hz - L model220 - 240 V, 50/60 Hz - V model110 - 120 V, 50/60 Hz - J model100 V, 50/60 Hz Power Consumption - C, K, A, B, G, L, V models200 W - J model145 W SystemBass Reflex System Impedance6 ohms Driver16 cm (6-5/16”) Woofer Frequency Response40 Hz to 100 Hz Dimensions (W x H x D)200 x 390 x 382 mm (7-7/8 x 15-3/8 x 15-1/16) Weight11.5 kg (25 lbs. 5 oz.) FinishSilver Color FRONT AND SURROUND SPEAKER