Yamaha-DVDS-559-Service-Manual电路原理图.pdf

SERVICE MANUAL This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. IMPORTANT NOTICE 101003 SERVICE MANUAL DVD-S559 DVD PLAYER 2006 All rights reserved. This manual is copyrighted by YAMAHA and may not be copied or redistributed either in print or electronically without permission. DVD-S559 I CONTENTS TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . .14 PREVENTION OF ELECTROSTATIC DISCHARGE . . .4 LOCALE MANAGEMENT INFORMATION . . . . . . . .4 FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 REAR PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . .5 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 INTERNAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 REPAIR NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 DISASSEMBLY PROCEDURES . . . . . . . . . . . . . .912 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . 13-14 BLOCK DIAGRAMS . . . . . . . . . . . . . . . . . . . . . .1518 WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . .19 PRINTED CIRCUIT BOARDS . . . . . . . . . . . . . . .2021 SCHEMATIC DIAGRAMS . . . . . . . . . . . . . . . . . .2229 REPLACEMENT PARTS LIST . . . . . . . . . . . . . .3031 REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . .3233 06. 02 RadioFans.CN 收音机爱 好者资料库 DVD-S559 2 DVD-S559 I TO SERVICE PERSONNEL 1. Critical Components Information Components having special characteristics are marked Z and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohms shunted by 0.15F. GLeakage current must not exceed 0.5mA. GBe sure to test for leakage with the AC plug in both polarities. WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food. Side ASide B DVD P.C.B.Lead Free SolderLead Free Solder POWER P.C.B.Lead Free Solder OPERATION 1 P.C.B.Lead Free Solder OPERATION 2 P.C.B.Lead Free Solder About Lead Free Solder The P.C.B.s installed in this unit are soldered using the following solder. Side A Side B SMT REFLOWProcess MI FLOWProcess Solder Dip Among some types of lead free solder currently available, it is recommended to use one of the following types for the repair work. Sn + Ag + Cu (tin + silver + copper) Sn + Cu (tin + copper) Sn + Zn + Bi (tin + zinc + bismuth) Caution: 1. As the melting point temperature of the lead free solder is about 30C to 40C (50F to 70 F) higher than that of the lead solder, be sure to use a soldering iron suitable to each solder. 2. If lead solder must be used, be sure to remove lead free solder from each terminal section of the parts to be replaced and from the area around it completely before soldering, or make sure that the lead free solder and lead solder melt together fully. AC LEAKAGE TESTER OR EQUIVALENT EQUIPMENT UNDER TEST INSULATING TABLE WALL OUTLET RadioFans.CN 收音机爱 好者资料库 DVD-S559 3 DVD-S559 WARNING The use of optical instruments with this product will increase eye hazard. Repair handling should take place as much as possible with a disc loaded inside the player. CAUTION ADVARSEL VARNING VARO ! VORSICHT CUIDADO :VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM :SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEFFNET NICHT DEM STRAHL AUSSETSEN :SYNLIG OG USYNLIG LASERSTRLING VED BNING UNDG UDSTTELSE FOR STRLING :SYNLIG OCH OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD BETRAKTA EJ STRLEN :AVATTAESSA OLET ALTTIINA NKYVLLE JA NKYMTTMLLE LASER STEILYLLE, L KATSO STEESEEN :RADIACIN LSER VISIBLE E INVISIBLE AL ESTAR ABIERTO. EVITAR EXPOSICIN AL RAYO. WARNING: Laser Safety This product contains a laser beam component. This component may emit invisible, as well as visible radia-tion, which may cause eye damage. To protect your eyes and skin from laser radiation, the following pre-cautions must be used during servicing of the unit. 1) When testing and/or repairing any component within the product, keep your eyes and skin more than 30 cm away from the laser pick-up unit at all times. Do not stare at the laser beam at any time. 2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere in this manual. 3) CAUTION : Use of controls, adjustments or perform-ance of procedures other than those specified herein may result in hazardous radiation exposure. Laser Emitting Conditions: 1) When the Top Cover is removed, and the STANDBY/ ON SW is turned to the “ON” position, the laser compo-nent will emit a beam for several seconds to detect if a disc is present. During this time (510 sec.) the laser may radiate through the lens of the laser pick-up unit. Do not attempt any servicing during this period! If no disc is detected, the laser will stop emitting the beam. When a disc is loaded, you will not be exposed to any laser emissions. 2) The laser power level can be adjusted with the VR on the pick-up PWB, however, this level has been set by the factory prior to shipping from the factory. Do not adjust this laser level control unless instruction is provided elsewhere in this manual. Adjustment of this control can increase the laser emission level from the device. Laser Diode Propeties Type:Semiconductor laser GaAlAs Wave length:650 nm (DVD) 780 nm (VCD/CD) Output Power:5 mW (DVD/VCD/CD) Beam divergence60 degree VARO! :AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NKYMTTMLLE LASER- STEILYLLE. L KATSO STEESEEN. VARNING! :OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD. BETRAKTA EJ STRLEN. CAUTIONVISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. ADVARSELSYNLIG OG USYNLIG LASERSTRLING VED BNING. UNDG UDSTTELSE FOR STRLING. ADVARSELSYNLIG OG USYNLIG LASERSTRLING NR DEKSEL PNES. UNNG EKSPONERING FOR STRLEN. VARNINGSYNLIG OCH OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD. BETRAKTA EJ STRLEN. VARO!AVATTAESSA OLET ALTTIINA NKYVLLE JA NKYMTTMLLE LASER S TEILYLLE. L KATSO STEESEEN. VORSICHTSICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEFFNET. NICHT DEM STRAHL AUSSETSEN. DANGERVISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. ATTENTIONRAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS DOUVERTURE. EXPOSITION DANGEREUSE AU FAISCEAU DVD-S559 4 DVD-S559 I PREVENTION OF ELECTROSTATIC DISCHARGE The laser diode in the DVD mechanism may be damaged due to static electricity from clothes or the human body. Use caution to prevent electrostatic damage when servicing or handling the DVD-mechanism. 1. Grounding for electrostatic damage prevention Some devices, such as the DVD player, use an optical pickup (laser diode) that will be damaged by static electricity in the working environment. Only attempt service after ensuring that all grounding procedures have been completed. 1. Worktable grounding Put a grounded conductive material (sheet) or iron sheet on the area where the optical pickup is placed. 2. Human body grounding Use an anti-static wrist strap to discharge the static electricity from your body. 2. Handling Precautions for DVD mechanism 1. Handle the DVD mechanism gently, as it is an extremely high-precision assembly. 2. The flexible cable lines may break if an excessive force is applied to it. Use caution when handling the cable. 3. The semi-fixed resistor for laser power adjustment should not be adjusted. Do not turn the resistor. I LOCALE MANAGEMENT INFORMATION Locale Management Information : This DVD player is designed and manufactured to respond to the Locale Management Information that is recorded on a DVD disc. If the Locale number described on the DVD disc does not correspond to the Locale number of this DVD player, this DVD player cannot play this disc. 1M Conductive material (sheet) or steel sheet Anti-static wrist strap 1 4 4 2 2 2 3 6 5 5 5 This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Warning for power supply The primary side of the power supply carries live mains voltage when the player is connected to the mains even when the player is switched off ! This primary area is not shielded so it is possible to touch copper tracks and/or components when servicing the player. Service personnel have to take precautions to prevent touching this area or components in this area. Note: The screws on the DVD mechanism may never be touched, removed or re-adjusted. Handle the DVD mechanism with care when the unit has to be exchanged! The DVD mechanism is very sensitive for dropping or giving shocks. DVD-S559 5 DVD-S559 I FRONT PANEL I REAR PANEL WG11920 DVD I REMOTE CONTROL DVD-S559 6 DVD-S559 I SPECIFICATIONS G RGB (SCART) output Output level .0.7 Vp-p (75 ohms) Connection . Euroconnector G Component video output Y (luminance) - Output level. 1 Vp-p (75 ohms)(Green) Pb/Cb (color) - Output level. 0.7 Vp-p (75 ohms)(Blue) Pr/Cr (color) - Output level . 0.7 Vp-p (75 ohms)(Red) Connection . RCA G S-video output Y (luminance) - Output level.1 Vp-p (75 ohms) C (color) - Output level .286 mVp-p (75 ohms) Connection .S-video (Mini, DIN, 4 pins) G Video output Output level .1 Vp-p (75 ohms) Connection . RCA G Audio output (1 stereo pair) Output level .During audio output 200 mVrms (1 kHz, -20 dB) Number of channels.2 Connection . RCA G Digital audio characteristics Frequency response . 4 Hz to 44 kHz (DVD fs: 96 kHz) S/N ratio . 115 dB Dynamic range . 101 dB Total harmonic distortion . 0.0023 % G Digital output Coaxial digital output.RCA IEC60958 for CDDA/LPCM IEC61937 for MPEG 1/2, Dolby Digital and DTS * Specifications subject to change without notice. G General System . DVD player Power requirements.AC 220240 V, 50/60 Hz Power consumption . 7 W Power consumption (standby) . 0.7 W Weight . 1.8 kg (3 lbs. 15 oz.) Dimensions (W x H x D). 435 mm x 61 mm x 213 mm (17-1/8” x 2-3/8” x 8-3/8”) Finish. Black color Silver color G Accessories Audio/video cable x 1 Power cable x 1 Remote control x 1 AA/R6 dry cell batteries x 2 Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. DivX and associated logos are trademarks of DivXNetworks, Inc and are used under license. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. G . European model DVD-S559 7 DVD-S559 I DIMENSIONS 435 (17-1/8) 205 (8-1/16”) 6 (1/4”) 13 (1/2”) 2 (1/16”) 48 (1-7/8”) 61 (2-3/8”) 213 (8-3/8”) I INTERNAL VIEW 123 54 1POWER P.C.B. 2DVD Mechanism Unit 3DVD P.C.B. 4OPERATION 1 P.C.B. 5OPERATION 2 P.C.B. DV