Yamaha-DVDS-2500-Service-Manual电路原理图.pdf
SERVICE MANUAL This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. IMPORTANT NOTICE 100940 SERVICE MANUAL DISASSEMBLY PROCEDURES / 分解手順 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .910 BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .11 WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . .12 PRINTED CIRCUIT BOARD . . . . . . . . . . . . . . . .1321 SCHEMATIC DIAGRAM . . . . . . . . . . . . . . . . . . .2249 EXPLODED VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . .50 MECHANICAL PARTS . . . . . . . . . . . . . . . . . . . . . . .51 I CONTENTS TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . .24 PREVENTION OF ELECTRO STATIC DISCHARGE . . . . . .4 LOCALE MANAGEMENT INFORMATION . . . . . . . .5 FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 REMOTE CONTROL PANEL . . . . . . . . . . . . . . . . . . .5 REAR PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 SPECIFICATIONS / 参考仕様 . . . . . . . . . . . . . . . . . .67 REPAIR NOTES / 修理上留意点 . . . . . . . . . . . . . . . .8 INTERNAL VIEW / 各部名称 . . . . . . . . . . . . . . . . . . . . .8 DVD-AUDIO/VIDEO SACD PLAYER DVD-S2500 DVD-S2500 05.01 RadioFans.CN 收音机爱 好者资料库 2 DVD-S2500 DVD-S2500 I TO SERVICE PERSONNEL 1. Critical Components Information Components having special characteristics are marked Z and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohms shunted by 0.15F. AC LEAKAGE TESTER OR EQUIVALENT EQUIPMENT UNDER TEST INSULATING TABLE WALL OUTLET GLeakage current must not exceed 0.5mA. GBe sure to test for leakage with the AC plug in both polarities. WARNING: Laser Safety This product contains a laser beam component. This component may emit invisible, as well as visible radiation, which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must be used during servicing of the unit. 1) When testing and/or repairing any component within the product, keep your eyes and skin more than 30 cm away from the laser pick-up unit at all times. Do not stare at the laser beam at any time. 2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere in this manual. 3) CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food. Laser Emitting conditions: 1) When the Top Cover is removed, and the STANDBY/ ON SW is turned to the ON position, the laser component will emit a beam for several seconds to detect if a disc is present. During this time (5-10 sec.) the laser may radiate through the lens of the laser pick- up unit. Do not attempt any servicing during this period! If no disc is detected, the laser will stop emitting the beam. When a disc is loaded, you will not be exposed to any laser emissions. 警告:安全対策 本機光線放射部品搭載。 部品放射光線目損傷起。 光線目及肌保護、 本機 修理作業中下記注意厳守。 ) 時修理時、 目及肌光 30c以上離。 場合 光線見。 ) 光再調整及分解。 ) 上指定以外制御、 調整、 手順光線照射結果招恐 。 放射条件 ) 取外STANDBY/ONON 、検知510秒間、光 光線放射。間、修 理。 検知、光線放射 停止。場合、 遮光線修理担当者届 。 RadioFans.CN 收音机爱 好者资料库 3 DVD-S2500 DPX-1200DVD-S2500 Laser Diode Properties Type:Semiconductor laser GaAlAs Wave length:650 nm (DVD/SA-CD) 790 nm (VCD/CD) Output Power:7 mW (DVD/SA-CD/VCD/CD) VARO!: AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NKYMTTMLLE LASER-STEILYLLE. L KATSO STEESEEN. VARNING! : OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD. BETRAKTA EJ STRLEN. 半導体 GaAlAs 波長650 nm (DVD/SA-CD) 790 nm (VCD/CD) 出力7 mW (DVD/SA-CD/VCD/CD) WARNING The use of optical instruments with this product will increase eye hazard. Repair handling should take place as much as possible with a disc loaded inside the player. CAUTIONVISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM ADVARSELSYNLIG OG USYNLIG LASERSTRLING VED BNING UNDG UDSTTELSE FOR STRLING ADVARSELSYNLIG OG USYNLIG LASERSTRLING NR DEKSEL PNES UNNG EKSPONERING FOR STRLEN VARNINGSYNLIG OCH OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD BETRAKTA EJ STRLEN VARO!AVATT AESSA OLET ALTTIINA NKYVLLE JA NKYMTTMLLE LASER STEILYLLE. L KATSO STEESEEN 2) The laser power level can be adjusted with the VR on the pick-up PWB, however, this level has been set by the factory prior to shipping from the factory. Do not adjust this laser level control unless instruction is provided elsewhere in this manual. Adjustment of this control can increase the laser emission level from the device. ) 光基板上VR 調整可能、工場出荷前調整済 、VR廻。VR廻 装置光線放射上恐 。 le laser CAUTION - Visible and invisib radiation when open. Avoid exposure to beam. VORSICHTSICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEFFNET NICHT DEM STRAHL AUSSETSEN DANGERVISIBLE AND INVISIBLE LASER RADIATI ON WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM ATTENTION RAYONNEMENT LASER VISIBLE ET INVIS- IBLE EN CAS DOUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU 4 DVD-S2500 DVD-S2500 I PREVENTION OF ELECTRO STATIC DISCHARGE The laser diode in the DVD mechanism may be damaged due to static electricity from clothes or the human body. Use caution to prevent electro static damage when servicing or handling the DVD-mechanism. 1. Grounding for electro static damage prevention Some devices, such as the DVD player, use an optical pickup (laser diode) that will be damaged by static electricity in the working environment. Only attempt service after ensuring that all grounding procedures have been completed. 1. Worktable grounding Put a grounded conductive material (sheet) or iron sheet on the area where the optical pickup is placed. 2. Human body grounding Use an anti-static wrist strap to discharge the static electricity from your body. 1M Conductive material (sheet) or steel sheet Anti-static wrist strap 2. Handling Precautions for DVD mechanism 1. Handle the DVD mechanism gently, as it is an extremely high-precision assembly. 2. The flexible cable lines may break if an excessive force is applied to it. Use caution when handling the cable. 3. The semi-fixed resistor for laser power adjustment should not be adjusted. Do not turn the resistor. Warning for power supply The primary side of the power supply carries live mains voltage when the player is connected to the mains even when the player is switched off ! This primary area is not shielded so it is possible to touch copper tracks and/or components when servicing the player. Service personnel have to take precautions to prevent touching this area or components in this area . Note: The screws on the DVD mechanism may never be touched, removed or re-adjusted. Handle the DVD mechanism with care when the unit has to be exchanged! The DVD mechanism is very sensitive for dropping or giving shocks. J model 5 DVD-S2500 DPX-1200DVD-S2500 I LOCALE MANAGEMENT INFORMATION Locale Management Information : This DVD player is designed and manufactured to respond to the Locale Management Information that is recorded on a DVD disc. If the Locale number described on the DVD disc does not correspond to the Locale number of this DVD player, this DVD player cannot play this disc. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. q w r w t t r w y e t I FRONT PANEL I REMOTE CONTROL PANEL 6 DVD-S2500 DVD-S2500 I SPECIFICATIONS / 参考仕様 M J model I REAR PANELS M U model M G model PLAYBACK SYSTEM /対応 DVD-Audio DVD-Video Super Audio-CD, Stereo/Multi-channel and Hybrid disc DVD+R, DVD+RW DVD-R, DVD-RW (Video Format) Video CD (VCD) Super Video CD (SVCD) CD-Audio (CD-DA) CD-R/CD-RW (CD-DA, VCD, SVCD) MP3, JPEG VIDEO PERFORMANCE /部 Video Output / 映像出力信号 1 Vpp into 75 ohms S-Video Output / S信号出力 Y: 1Vpp into 75 ohms C: 0.3Vpp into 75 ohms (PAL) C: 0.286Vpp into 75 ohms (NTSC) Component Video Output / 出力 Y: 1Vpp into 75 ohms Pb/Cb Pr/Cr: 0.7Vpp into 75 ohms RGB (SCART) Output0.7 Vpp into 75 ohms (G model) D1/D2 OutputD1: 1Vpp into 75 ohms (J model) D2: 0.7Vpp into 75 ohms (J model) AUDIO FORMAT / DSDMulti-channel and Stereo Dolby Digital/DTS/MPEG Compressed Digital PCM/Packed PCMfs.48, 96, 192, and 44.1, 88.2 176.4 kHz 16, 20, 24 bits MP3 (ISO9660)32, 44.1, 48, and 16, 22.05, 24 kHz Full decoding of Dolby Digital, DTS and MPEG multi-channel sound/ analogue stereo sound Dolby Surround-compatible downmix from Dolby Digital multi-chan- nel sound 3D Sound for virtual 5.1 channel sound on two speakers Dolby Pro Logic II 5.1 ch decoding from the stereo source 7 DVD-S2500 DPX-1200DVD-S2500 AUDIO PERFORMANCE /特性 DA Converter / DA24 bits Signal-Noise Ratio / SN比115 dB Dynamic Range / (DVD 48 kHz 24 bit)103 dB (Super Audio CD)107 dB DVDfs 96 kHz2 Hz 44 kHz CD/VCDfs 44.1 kHz2 Hz 20 kHz Distortion and Noise / 全高調波歪率 (1 kHz) 0.0017% (DVD 48 kHz 24 bit) TV STANDARD (PAL/50Hz) (NTSC/60Hz) Number of lines625525 PlaybackMultistandard(PAL/NTSC) CONNECTIONS /接続端子 Y OutputCinch (green) Pb/Cb OutputCinch (blue) Pr/Cr OutputCinch (red) SCARTEuroconnector (G model) D Terminal(J model) S-Video OutputMini DIN, 4 pins Video OutputCinch (yellow) Audio Output (L+R)Cinch (white/red) Digital Output1 coaxial, 1 optical HDMI OutputType A IEEE1394 Output4 pins x 2 6 channel Analog Output Audio Main L/RCinch (white/red) Audio Surround L/RCinch (white/red) Audio CenterCinch (blue) Audio SubwooferCinch (black) GENERAL /一般 Dimensions (W x H x D) / 寸法(幅 x 高 x 奥行) 435 x 100 x 314 mm (17-1/8 x 3-15/16 x 12-3/8) Weight / 質量Approx. 5.6 Kg (12 lbs 5 oz) Finish / 仕上Gold Color (G, J models) Black Color (U, G models) Titanium Color (G model) Power Supply / 電源電圧AC120V, 60Hz (U model) AC230-240V, 50Hz (G model) AC100V, 50/60Hz (J model) Power Consumption / 消費電力33W Standby Power Consumption (reference data) / 待機時消費電力(参考値)1W ACCESSORIES /付属品 Remote Control, Batteries x 2, Power Cable x 1 Audio/Video Cable (U, J models) x 1 Audio Pin Cable (G model) x 1 Video Cable (G model) x 1 * Specifications subject to change without prior notice. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. “DCDi” is a trademark of Faroudja, a division of Genesis Microchip, Inc. HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trademark of HDMI Licensing LLC. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. “i.LINK” and the “i.LINK” logo are trademarks of Sony Corporation. This product complies with the following i.LINK interface specifications: 1. IEEE Std 1394a-2000, Standard for a High Performance Serial Bus 2. Audio and Music Data Transmission Protocol 2.1 Following the standard for AM824 sequence adaptation layers, the product is compatible with IEC60958 bitstream, DVD-A and SA-CD media. 実施権 基製造。 、PRO LOGIC D記号、 商標。 DTS DTS Digital Surround 登録商 標。 DCDi 、Genesis Microchip Inc. 事業部門 Faroudja 商標。 HDMI HDMI Licensing, LLC 登 録商標。 本製品、著作権保護技術採用、 社及他著作権利者保有米国特許及 他知的財産権保護。 著作権保護技術使用、社許可 必要、社特別許可限 家庭用及他一部視聴用使用制限 。分解、改造禁。 i.LINK i.LINK 株式会社商標。 機器 i.LINK 、以下規格基 設計。 1. IEEE Std 1394a-2000, Standard for a High Performance Serial Bus 2.Audio and Music Data Transmission Protocol 2.1 規格 AM824 sequence adaptation layers 中、IEC60958 bitstream、DVD-Audio SA- CD 対応。 U . USA model G . European model J. Japanese model 8 DVD-S2500 DVD-S2500 I REPAIR NOTES / 修理上留意点 1) Power Supply Unit The power supply unit has to be replaced in case of failure. 2) DVD Mechanism The DVD mechanism is a non-repairable unit and in case of failure, it has to be replaced with a complete DVD