Yamaha-DSPAX-2400-Service-Manual电路原理图.pdf

SERVICE MANUAL 100867 IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. P.O.Box 1, Hamamatsu, Japan I CONTENTS TO SERVICE PERSONNEL . 2 FRONT PANELS. 35 REAR PANELS . 612 REMOTE CONTROL. 13 SPECIFICATIONS. 1417 INTERNAL VIEW . 18 DISASSEMBLY PROCEDURES / 分解手順 . 1922 UPDATING FIRMWARE / 書込. 2324 SELF DIAGNOSIS FUNCTION (DIAG) / 自己診断機能（）. 2549 AMP ADJUSTMENT / 部調整 . 5051 DISPLAY DATA . 5253 IC DATA . 5463 BLOCK DIAGRAM. 6465 PRINTED CIRCUIT BOARD . 6685 PIN CONNECTION DIAGRAM . 86 SCHEMATIC DIAGRAM . 8797 PARTS LIST. 99141 REMOTE CONTROL. 142147 Parts List for Carbon Resistors . 148 AV RECEIVER/AV AMPLIFIER RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 RadioFans.CN 收音机爱 好者资料库 Copyright 2003 YAMAHA CORPORATION This manual is copyrighted by YAMAHA and may not be copied or redistributed either in print or electronically without permission. RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 2 WALL OUTLET EQUIPMENT UNDER TEST AC LEAKAGE TESTER OR EQUIVALENT INSULATING TABLE WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA- SON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food. I TO SERVICE PERSONNEL 1. Critical Components Information Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohm shunted by 0.15F. “CAUTION” “F1, F2: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 10A, 125V FUSE.” CAUTION F1, F2: REPLACE WITH SAME TYPE 10A, 125V FUSE. ATTENTION F1, F2: UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE DE 10A, 125V. GLeakage current must not exceed 0.5mA. GBe sure to test for leakage with the AC plug in both polarities. 製品使用基板面 付、Sn+Ag+Cu （錫+銀+銅） 合金無鉛 使用。 、DSP P.C.B.、FUNCTION P.C.B. CONVERSION P.C.B.部品面表面実装部品付 鉛入使用。 無鉛種類、修理時 下記無鉛使用推奨。 Sn+Ag+Cu （錫+銀+銅） Sn+Cu （錫+銅） Sn+Zn+Bi （錫+亜鉛+） 注意： 無鉛融点温度通常鉛入比30 40程度高、 合使用。 鉛入使得場合、交 換部品端子部周辺部無鉛取 除、無鉛鉛入十分 溶状態付。 The foil side of all P.C.B.s used for this product are soldered with lead-free soldering material which is an alloy of Sn+Ag+Cu (tin + silver + copper). However, the surface mount devices on the component side of the DSP P.C.B., FUNCTION P.C.B. and CONVERSION P.C.B. are soldered with the lead solder. Among some types of lead-free solder currently available, it is recommended to use one of the following types for the repair work. Sn + Ag + Cu (tin + silver + copper) Sn + Cu (tin + copper) Sn + Zn + Bi (tin + zinc + bismuth) Caution: 1. As the melting point temperature of the lead-free solder is about 30C to 40C (50F to 70F) higher than that of the lead solder, be sure to use a soldering iron suitable to each solder. 2. If lead solder must be used, be sure to remove lead- free solder from each terminal section of the parts to be replaced and from the area around it completely before soldering, or make sure that the lead-free solder and lead solder melt together fully. About lead-free solder / 無鉛 RadioFans.CN 收音机爱 好者资料库 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 3 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 I FRONT PANELS RX-V2400 (U, C, A models) RX-V2400 (L, R, T, K models) RX-V2400RDS (B, G models) RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 4 RX-V1400RDS (B, G models) DSP-AX2400 (J model) RX-V1400 (U, C, A, L, R, T, K models) RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 5 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 HTR-5690 (U, C, A, T models) DSP-AX1400 (J model) RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 6 I REAR PANELS RX-V2400 (U, C models) RX-V2400 (A model) RX-V2400 (L model) RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 7 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 RX-V2400 (R model) RX-V2400 (T model) RX-V2400 (K model) RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 8 DSP-AX2400 (J model) RX-V2400RDS (B model) RX-V2400RDS (G model) RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 9 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 RX-V1400 (U, C models) RX-V1400 (A model) RX-V1400 (L model) RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 10 RX-V1400 (R model) RX-V1400 (T model) RX-V1400 (K model) RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 11 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 RX-V1400RDS (B model) RX-V1400RDS (G model) HTR-5690 (U, C models) RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 12 DSP-AX1400 (J model) HTR-5690 (A model) HTR-5690 (T model) RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 13 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 I REMOTE CONTROL RX-V1400/HTR-5690/DSP-AX1400 (U, C, A, R, L, T, K, J models) RX-V1400RDS (B, G models) RX-V2400/RX-V2400RDS/ DSP-AX2400 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 RX-V2400/RX-V2400RDS/DSP-AX2400 RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 14 I SPECIFICATIONS / 参考仕様 I Audio Section / 部 Minimum RMS Output Power (Power Amp. Section) / 定格出力 ( 部) RX-V2400/RX-V2400RDS/DSP-AX2400 (20 Hz to 20 kHz) FRONT L/R U, C, A, B, G, L, R, T, K models (0.04% THD, 8 ohms).120W + 120W J model (0.06% THD, 6 ohms) .120W + 120W CENTER U, C, A, B, G, L, R, T, K models (0.04% THD, 8 ohms).120W J model (0.06% THD, 6 ohms) . 120W SURROUND L/R U, C, A, B, G, L, R, T, K models (0.04% THD, 8 ohms).120W + 120W J model (0.06% THD, 6 ohms) .120W + 120W SURROUND BACK L/R U, C, A, B, G, L, R, T, K models (0.04% THD, 8 ohms).120W + 120W J model (0.06% THD, 6 ohms) .120W + 120W RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 (20 Hz to 20 kHz) FRONT L/R U, C, A, B, G, L, R, T, K models (0.04% THD, 8 ohms).110W + 110W J model (0.06% THD, 6 ohms) .110W + 110W CENTER U, C, A, B, G, L, R, T, K models (0.04% THD, 8 ohms).110W J model (0.06% THD, 6 ohms) . 110W SURROUND L/R U, C, A, B, G, L, R, T, K models (0.04% THD, 8 ohms).110W + 110W J model (0.06% THD, 6 ohms) .110W + 110W SURROUND BACK L/R U, C, A, B, G, L, R, T, K models (0.04% THD, 8 ohms).110W + 110W J model (0.06% THD, 6 ohms) .110W + 110W Maximum Power / 実用最大出力 (EIAJ, 1kHz, 10% THD) RX-V2400/RX-V2400RDS/DSP-AX2400 FRONT L/R A, L, R, T, K models (8 ohms) .175W + 175W J model (6 ohms) .180W + 180W CENTER A, L, R, T, K models (8 ohms) . 175W J model (6 ohms) . 180W SURROUND L/R A, L, R, T, K models (8 ohms) .175W + 175W J model (6 ohms) .180W + 180W SURROUND BACK L/R A, L, R, T, K models (8 ohms) .175W + 175W J model (6 ohms) .180W + 180W RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 FRONT L/R A, L, R, T, K models (8 ohms) .165W + 165W J model (6 ohms) .170W + 170W CENTER A, L, R, T, K models (8 ohms) . 165W J model (6 ohms) . 170W SURROUND L/R A, L, R, T, K models (8 ohms) .165W + 165W J model (6 ohms) .170W + 170W SURROUND BACK L/R A, L, R, T, K models (8 ohms) .165W + 165W J model (6 ohms) .170W + 170W Dynamic Power Per Channel / (IHF) RX-V2400/RX-V2400RDS/DSP-AX2400 U, C, A, L, R, T, K models (8/6/4/2 ohms) . 155/195/250/330W RX-V1400/RX-V1400RDS/HTR-5690/DSP-AX1400 U, C, A, L, R, T, K models (8/6/4/2 ohms) . 145/185/240/320W DIN Standard Output Power Per Channel / DIN B, G models RX-V2400RDS (1 kHz, 0.7% THD, 4 ohms) FRONT L/R .180W + 180W CENTER. 180W SURROUND L/R .180W + 180W SURROUND BACK L/R .180W + 180W RX-V1400RDS (1 kHz, 0.7% THD, 4 ohms) FRONT L/R .170W + 170W CENTER. 170W SURROUND L/R .170W + 170W SURROUND BACK L/R .170W + 170W Dynamic Headroom / RX-V2400 U, C, A, L, R, T, K models (8 ohms). 1.2dB RX-V1400/HTR-5690 U, C, A, L, R, T, K models (8 ohms). 0.76dB IEC Power / IEC B, G models RX-V2400RDS (1 kHz, 0.04% THD, 8 ohms) FRONT L/R .135W + 135W RX-V1400RDS (1 kHz, 0.04% THD, 8 ohms) FRONT L/R .125W + 125W Damping Factor / 20 Hz to 20 kHz, SPEAKER-A, 8 ohms . 140 or more Input Sensitivity / Input Impedance (入力感度/入力) PHONO (MM). 3.5 mV / 47 k-ohms CD, etc. . 200 mV / 47 k-ohms MULTI CH INPUT FRONT L/R, CENTER, SURROUND L/R, SUB WOOFER . 200 mV / 47 k-ohms Maximum Input Signal Level / 最大許容入力 PHONO (MM) (1 kHz, 0.1% THD). 100mV CD, etc. (1 kHz, 0.5% THD) . 2.4V Output Level / Output Impedance (出力電圧/出力) REC OUT . 200 mV / 1.2 k-ohms PRE OUT (FRONT L/R, CENTER, SURROUND, SURROUND BACK) . 1.0 V / 500 ohms SUB WOOFER. 2.0 V / 500 ohms RX-V2400 U, C, A models ZONE 2 OUT. 1.0 V / 1.2 k-ohms ZONE 3 OUT. 1.0 V / 1.2 k-ohms RX-V1400/HTR-5690 U, C, A models ZONE 2 OUT. 1.0 V / 1.2 k-ohms ZONE 3 OUT. 200 mV / 1.2 k-ohms Headphone Jack Rated Output / Impedance (出力/出 力) CD, etc. (1 kHz, 40 mV, 8 ohms). 150 mV / 100 ohms Frequency Response / 周波数特性 CD, etc. to FRONT L/R (10 Hz to 100 kHz) . +0/-3.0dB RIAA Equalization Deviation / RIAA偏差