Yamaha-DVDS-1700-Service-Manual电路原理图.pdf

SERVICE MANUAL 101037 IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. DVD AUDIO/VIDEO SA-CD PLAYER DVD-S1700 P.O.Box 1, Hamamatsu, Japan DVD-S1700 2006 All rights reserved. This manual is copyrighted by YAMAHA and may not be copied or redistributed either in print or electronically without permission. 06.12 I CONTENTS TO SERVICE PERSONNEL . 24 PREVENTION OF ELECTROSTATIC DISCHARGE . 4 LOCALE MANAGEMENT INFORMATION . 4 FRONT PANEL . 5 REAR PANELS . 56 REMOTE CONTROL PANEL . 7 SPECIFICATIONS / 参考仕様 . 7 INTERNAL VIEW . 8 TRADE MODE / . 8 ERROR MESSAGE / . 8 TROUBLESHOOTING / . 8 DISASSEMBLY PROCEDURES / 分解手順. 9 DISPLAY DATA . 10 IC DATA . 1230 BLOCK DIAGRAM. 31 WIRING DIAGRAM . 32 PRINTED CIRCUIT BOARDS. 3336 SCHEMATIC DIAGRAMS. 3742 REPLACEMENT PARTS LIST . 4345 REMOTE CONTROL. 46 RadioFans.CN 收音机爱 好者资料库 DVD-S1700 2 DVD-S1700 WALL OUTLET EQUIPMENT UNDER TEST AC LEAKAGE TESTER OR EQUIVALENT INSULATING TABLE WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA- SON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food. 1. Critical Components Information Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are prop- erly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohms shunted by 0.15F. GLeakage current must not exceed 0.5mA. GBe sure to test for leakage with the AC plug in both polarities. I TO SERVICE PERSONNEL 本機搭載基板付接合 部無鉛付。 無鉛種類、修理時下記 無鉛使用推奨。 Sn+Ag+Cu （錫+銀+銅） Sn+Cu （錫+銅） Sn+Zn+Bi （錫+亜鉛+） 注意： 無鉛融点温度通常鉛入比3040 程度高、合 使用。 All of the P.C.B.s installed in this unit and solder joints are soldered using the lead free solder. Among some types of lead free solder currently available, it is recommended to use one of the following types for the repair work. Sn + Ag + Cu (tin + silver + copper) Sn + Cu (tin + copper) Sn + Zn + Bi (tin + zinc + bismuth) Caution: As the melting point temperature of the lead free solder is about 30C to 40C (50F to 70F) higher than that of the lead solder, be sure to use a soldering iron suitable to each solder. About lead free solder / 無鉛 WARNING: Laser Safety This product contains a laser beam component. This component may emit invisible, as well as visible radiation, which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must be used during servicing of the unit. 1) When testing and/or repairing any component within the product, keep your eyes and skin more than 30 cm away from the laser pick-up unit at all times. Do not stare at the laser beam at any time. 2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere in this manual. 3) CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. RadioFans.CN 收音机爱 好者资料库 DVD-S1700 3 DVD-S1700 Laser Emitting conditions: 1) When the Top Cover is removed, and the STANDBY/ON SW is turned to the ON position, the laser component will emit a beam for several seconds to detect if a disc is present. During this time (5-10 sec.) the laser may radiate through the lens of the laser pick-up unit. Do not attempt any servicing during this period! If no disc is detected, the laser will stop emitting the beam. When a disc is loaded, you will not be exposed to any laser emissions. 2) The laser power level can be adjusted with the VR on the pick-up PWB, however, this level has been set by the factory prior to shipping from the factory. Do not adjust this laser level control unless instruction is provided elsewhere in this manual. Adjustment of this control can increase the laser emission level from the device. Laser Diode Properties Type:Semiconductor laser GaAlAs Wave length:650 nm (DVD) 790 nm (VCD/CD) Output Power:1.45 mW (DVD) 1.13 mW (VCD/CD) Beam divergence:60 degrees VARO!: AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NKYMTTMLLE LASER- STEILYLLE. L KATSO STEESEEN. VARNING! : OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD. BETRAKTA EJ STRLEN. DVD-S1700 4 DVD-S1700 I PREVENTION OF ELECTROSTATIC DISCHARGE This product incorporates copyright pro- tection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineer- ing or disassembly is prohibited. The laser diode in the DVD mechanism may be damaged due to static electricity from clothes or the human body. Use caution to prevent electrostatic damage when servicing or handling the DVD-mechanism. 1. Grounding for electrostatic damage prevention Some devices, such as the DVD player, use an optical pickup (laser diode) that will be damaged by static electricity in the working environment. Only attempt service after ensuring that all grounding procedures have been completed. 1. Worktable grounding Put a grounded conductive material (sheet) or iron sheet on the area where the optical pickup is placed. 2. Human body grounding Use an anti-static wrist strap to discharge the static electricity from your body. 2. Handling Precautions for DVD mechanism 1. Handle the DVD mechanism gently, as it is an extremely high-precision assembly. 2. The flexible cable lines may break if an excessive force is applied to it. Use caution when handling the cable. 3. The semi-fixed resistor for laser power adjustment should not be adjusted. Do not turn the resistor. I LOCALE MANAGEMENT INFORMATION Locale Management Information : This DVD player is designed and manufactured to respond to the Locale Management Information that is recorded on a DVD disc. If the Locale number described on the DVD disc does not correspond to the Locale number of this DVD player, this DVD player cannot play this disc. Warning for power supply The primary side of the power supply carries live mains voltage when the player is connected to the mains even when the player is switched off ! This primary area is not shielded so it is possible to touch copper tracks and/or components when servicing the player. Service personnel have to take precautions to prevent touching this area or components in this area. Note: The screws on the DVD mechanism may never be touched, removed or re-adjusted. Handle the DVD mechanism with care when the unit has to be exchanged! The DVD mechanism is very sensitive for dropping or giving shocks. 1M-ohms Conductive material (sheet) or steel sheet Anti-static wrist strap 1 4 2 2 2 5 5 5 4 3 6 DVD-S1700 5 DVD-S1700 I FRONT PANEL U, T, K, A, G, L, J models I REAR PANELS U model T model K model DVD-S1700 6 DVD-S1700 A model G model J model L model DVD-S1700 7 “HDMI”, the “HDMI” logo and “High Definition Multimedia Interface” are trademarks or regis- tered trademark of HDMI Licensing LLC. H D M I 、H D M IH i g h - D e f i n i t i o n Multimedia Interface、HDMI Licensing LLC 商標、登録商標。 “DCDi” is a trademark of Faroudja, a division of Genesis Microchip, Inc. DCDi、Genesis Microchip Inc.事業部門 Faroudja商標。 DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license. DivX、DivX Certified、関連、 DivX, Inc.商標。商標、DivX, Inc. 使用許諾得使用。 “DTS” and “DTS Digital Surround” are regis- tered trademarks of Digital Theater Systems, Inc. DTSDTS Digital Surround 登録商標。 I REMOTE CONTROL PANEL I SPECIFICATIONS / 参考仕様 GENERAL / 一般 Dimensions (W x H x D) /435 x 87 x 284.5 mm 寸法 （幅 x 高 x 奥行）(17-1/8 x 3-7/16 x 11-3/16) Weight / 質量3.3 Kg (7 lbs. 4 oz) Finish / 仕上Gold color (K, J models) Black color (U, A, G models) Titanium color (T, G, L models) Power supply / 電源電圧AC 120 V, 60 Hz (U model) AC 100-240 V, 50 Hz (T model) AC 100-240 V, 50/60 Hz (K, A, L models) AC 230 V, 50 Hz (G model) AC 100 V, 50/60 Hz (J model) Power consumption / 消費電力 Approx. 21 W Standby power consumption /< 0.5 W 待機時消費電力 ACCESSORIES / 付属品 Remote control x 1 Battery (AAA, R03, UM-4) x 2 Power cable (2 m) x 1 (U, T, A, G, L, J models) Power cable (2 m) x 2 (K model) Video pin cable (1 m) x 1 Audio pin cable (1 m) x 1 * Specifications are subject to change without prior notice. 参考仕様外観予告変更。 U . U.S.A. modelT . Chinese model K . Korean modelA . Australian model G . European modelL . Singapore model J . Japanese model Manufactured under license from Dolby Labora- tories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. 実施権製造 。 D記号、 商標。 DIMENSIONS Unit: mm (inch) 単位：mm （） PLAYBACK SYSTEM / 対応 DVD-video DVD-audio DVD-R, DVD-RW DVD+R, DVD+RW, DVD+R DL Video CD, SVCD SA-CD multi-channel and SA-CD stereo CD Picture CD CD-R, CD-RW VIDEO PERFORMANCE / 部 Video (CVBS) output1 Vpp into 75 ohms S-video outputY: 1 Vpp into 75 ohms C: 0.3 Vpp into 75 ohms D1/D2 output (J model)Y: 1 Vpp into 75 ohms PB/CB, PR/CR: 0.7 Vpp into 75 ohms Component video output (U, T, K, A, G, L models) Y: 1 Vpp into 75 ohms PB/CB, PR/CR: 0.7 Vpp into 75 ohms RGB (SCART) output (G model) 0.7 Vpp into 75 ohms Black level shift (U model) On/Off AUDIO FORMAT / Digital Dolby Digital/DTS/MPEG Compressed Digital PCM16, 20, 24 bits fs 44.1, 48, 88.2, 96 kHz MP3 (ISO 9660)32 kbps to 320 kbps fs 16, 22.05, 24, 32, 44.1, 48 kHz WMA64 kbps to 320 kbps mono, stereo Full decoding of Dolby Digital and DTS multi-channel sound Analog stereo sound Dolby surround compatible downmix from Dolby Digital multi- channel sound AUDIO PERFORMANCE / 特性 DA converter24 bits, 192 kHz Signal to noise (1 kHz)115 dB Dynamic range (1 kHz)105 dB DVDfs 96 kHz2 Hz to 44 kHz fs 48 kHz2 Hz to 22 kHz SVCDfs 48 kHz2 Hz to 22 kHz fs 44.1 kHz2 Hz to 20 kHz CD/VCDfs 44.1 kHz2 Hz to 20 kHz Distortion and noise (1 kHz)0.002 % TV STANDARD(PAL: 50 Hz) (NTSC: 60 Hz) Number of lines625525 PlaybackMultistandard(PAL/NTSC) CONNECTIONS / 接続端子 Video outputCinch (yellow) x 1 S-video outputMini DIN, 4 pins x 1 D1/D2 output (J model)1 Component video output Y outputCinch (green) x 1 PB/CB outputCinch (blue) x 1 PR/CR outputCinch (red) x 1 SCART (G model)Euroconnector x 1 Digital outputCoaxial x 1 Optical x 1 IEC60958 for CDDA/LPCM, IEC61937 for MPEG 1/2, Dolby Digital and DTS HDMIType A x 1 Audio output 2 channel analog output MIXED 2CH L/RCinch (white/red) x 1 pair Multi channel analog output FRONT L/RCinch (white/red) x 1 pair SURROUND L/RCinch (white/red) x 1 pair CENTERCinch (black) x 1 SUBWOOFERCinch (black) x 1 This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corpo- ration and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Re- verse engineering or disassembly is prohibited. 本製品、著作権保護技術採用、社及 他著作権利者保有米国特許及他知的財産権保 護。著作権保護技術使用、社許 可必要、社特別許可限家庭用及 他一部視聴用使用制限。分解、改造 禁。 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? DVD-S1700 8 NO DISC UNKNOWN DISC When no disc is loaded in the tray. / 場合。 When a disc which cannot be played or recognized is loaded in the tray. / 再生、認識場合。 I INTERNAL VIEW 1234 56 1 2 3 4 5 6 POWER SUPPLY UNIT DVD MECHANISM UNIT MAIN (1) P.C.B. MAIN (4) P.C.B. (G model) MAIN (2) P.C.B. MAIN (3) P.C.B. I ERROR MESSAGE / I TRADE MODE / In the TRADE mode, the tray open/close function is stopped temporarily. Setting TRADE mode 1. Connect the power cable of the main unit