Yamaha-DVS-5650-Service-Manual电路原理图.pdf

SERVICE MANUAL This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. IMPORTANT NOTICE 100863 SERVICE MANUAL MAINTENANCE FLOW CHART / . . . . . . . . . . . . . . . . .1421 BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .23 PRINTED CIRCUIT BOARD . . . . . . . . . . . . . . . .2428 WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . .29 SCHEMATIC DIAGRAM . . . . . . . . . . . . . . . . . . .3038 PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3946 I CONTENTS TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . .24 PREVENTION OF ELECTRO STATIC DISCHARGE . . . . . .4 LOCALE MANAGEMENT INFORMATION . . . . . . . .5 FRONT PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . .56 REMOTE CONTROL PANELS . . . . . . . . . . . . . . . . . .6 REAR PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 SPECIFICATIONS / 参考仕様 . . . . . . . . . . . . . . . . . . . .9 SERVICE HINTS / . . . . . . . . . . . . . . .10 DISASSEMBLY PROCEDURES / 分解手順 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1113 DVD-S540 DV-S5650 DVD PLAYER DVD-S540/DV-S5650 RadioFans.CN 收音机爱 好者资料库 2 DVD-S540/DV-S5650 DVD-S540 DV-S5650 I TO SERVICE PERSONNEL 1. Critical Components Information Components having special characteristics are marked Z and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohm shunted by 0.15F. AC LEAKAGE TESTER OR EQUIVALENT EQUIPMENT UNDER TEST INSULATING TABLE WALL OUTLET GLeakage current must not exceed 0.5mA. GBe sure to test for leakage with the AC plug in both polarities. WARNING: Laser Safety This product contains a laser beam component. This component may emit invisible, as well as visible radiation, which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must be used during servicing of the unit. 1) When testing and/or repairing any component within the product, keep your eyes and skin more than 30 cm away from the laser pick-up unit at all times. Do not stare at the laser beam at any time. 2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere in this manual. 3) CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food. Laser Emitting conditions: 1) When the Top Cover is removed, and the STANDBY/ ON SW is turned to the ON position, the laser component will emit a beam for several seconds to detect if a disc is present. During this time (5-10 sec.) the laser may radiate through the lens of the laser pick- up unit. Do not attempt any servicing during this period! If no disc is detected, the laser will stop emitting the beam. When a disc is loaded, you will not be exposed to any laser emissions. 警告：安全対策 本機光線放射部品搭載。 部品放射光線目損傷起。 光線目及肌保護、 本機 修理作業中下記注意厳守。 ） 時修理時、 目及肌光 30c以上離。 場合 光線見。 ） 光再調整及分解。 ） 上指定以外制御、 調整、 手順光線照射結果招恐 。 放射条件 ） 取外STANDBY/ONON 、検知510秒間、光 光線放射。間、修 理。 検知、光線放射 停止。場合、 遮光線修理担当者届 。 RadioFans.CN 收音机爱 好者资料库 3 DVD-S540/DV-S5650 DVD-S540 DV-S5650 Laser Diode Properties Type:Semiconductor laser GaAlAs Wave length:650 nm (DVD) 780 nm (VCD/CD) Output Power:7 mW (DVD) 10 mW (VCD/CD) Beam divergence:60 degree VARO!: AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NKYMTTMLLE LASER-STEILYLLE. L KATSO STEESEEN. VARNING! : OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD. BETRAKTA EJ STRLEN. 半導体 GaAlAs 波長650 nm (DVD) 780 nm (VCD/CD) 出力7 mW (DVD) 10 mW (VCD/CD) 広60 度 WARNING The use of optical instruments with this product will increase eye hazard. Repair handling should take place as much as possible with a disc loaded inside the player. WARNING LOCATION: REAR PANEL CAUTIONVISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM ADVARSELSYNLIG OG USYNLIG LASERSTRLING VED BNING UNDG UDSTTELSE FOR STRLING ADVARSELSYNLIG OG USYNLIG LASERSTRLING NR DEKSEL PNES UNNG EKSPONERING FOR STRLEN VARNINGSYNLIG OCH OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD BETRAKTA EJ STRLEN VARO!AVATT AESSA OLET ALTTIINA NKYVLLE JA NKYMTTMLLE LASER STEILYLLE. L KATSO STEESEEN VORSICHTSICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEFFNET NICHT DEM STRAHL AUSSETSEN DANGERVISIBLE AND INVISIBLE LASER RADIATI ON WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS DOUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU G, B modelsU, C, R, K, A, P, T models U, C, R, K, A, P, T modelsG, B models 2) The laser power level can be adjusted with the VR on the pick-up PWB, however, this level has been set by the factory prior to shipping from the factory. Do not adjust this laser level control unless instruction is provided elsewhere in this manual. Adjustment of this control can increase the laser emission level from the device. ） 光基板上VR 調整可能、工場出荷前調整済 、VR廻。VR廻 装置光線放射上恐 。 4 DVD-S540/DV-S5650 DVD-S540 DV-S5650 I PREVENTION OF ELECTRO STATIC DISCHARGE The laser diode in the DVD mechanism may be damaged due to static electricity from clothes or the human body. Use caution to prevent electro static damage when servicing or handling the DVD-mechanism. 1. Grounding for electro static damage prevention Some devices, such as the DVD player, use an optical pickup (laser diode) that will be damaged by static electricity in the working environment. Only attempt service after ensuring that all grounding procedures have been completed. 1. Worktable grounding Put a grounded conductive material (sheet) or iron sheet on the area where the optical pickup is placed. 2. Human body grounding Use an anti-static wrist strap to discharge the static electricity from your body. 1M Conductive material (sheet) or steel sheet Anti-static wrist strap Warning for power supply The primary side of the power supply carries live mains voltage when the player is connected to the mains even when the player is switched off ! This primary area is not shielded so it is possible to touch copper tracks and/or components when servicing the player. Service personnel have to take precautions to prevent touching this area or components in this area . The primary side of the power supply has been indicated with a lightening stroke and a stripe-marked print on the printed wiring board. Note: The screws on the DVD mechanism (position 50 in on the exploded view drawing) may never be touched, removed or re-adjusted. Handle the DVD mechanism with care when the unit has to be exchanged! The DVD mechanism is very sensitive for dropping or giving shocks. S VIDEOCOAXIAL PCM DTS MPEG DIGITAL OPTICAL DIGITAL OUTAUDIO OUT R LVIDEO VIDEO OUTCOMPONENT VIDEO OUT PRCRPBCBYD1 D2 CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT PRODUIT LASER DE CLASSE 1 J model 5 DVD-S540/DV-S5650 DVD-S540 DV-S5650 I LOCALE MANAGEMENT INFORMATION Locale Management Information : This DVD player is designed and manufactured to respond to the Locale Management Information that is recorded on a DVD disc. If the Locale number described on the DVD disc does not correspond to the Locale number of this DVD player, this DVD player cannot play this disc. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. q w r w t t r w y e t 2. Handling Precautions for DVD mechanism 1. Handle the DVD mechanism gently, as it is an extremely high-precision assembly. 2. The flexible cable lines may break if an excessive force is applied to it. Use caution when handling the cable. 3. The semi-fixed resistor for laser power adjustment should not be adjusted. Do not turn the resistor. M DVD-S540 (U, C models) I FRONT PANELS M DVD-S540 (A, B, G, P, T, K, J models) 6 DVD-S540/DV-S5650 DVD-S540 DV-S5650 M DVD-S540 (R model) M DV-S5650 (U, C model) M DV-S5650 (A,G models) M U, C, A, B, G, P, T, K, J models I REMOTE CONTROL PANELS M R model 7 DVD-S540/DV-S5650 DVD-S540 DV-S5650 M DVD-S540 (A model) M DVD-S540 (P model) M DVD-S540 (G, B models) I REAR PANELS M DVD-S540 (U, C models) M DVD-S540 (R, K models) 8 DVD-S540/DV-S5650 DVD-S540 DV-S5650 M DV-S5650 (U, C models) M DV-S5650 (A model) M DV-S5650 (G model) M DVD-S540 (T model) M DVD-S540 (J model) 9 DVD-S540/DV-S5650 DVD-S540 DV-S5650 I SPECIFICATIONS / 参考仕様 PLAYBACK SYSTEM /対応 DVD Video Video CD 2. Maybe MT1379BE is not working Signal F+ (TP13) & F- (TP1) correct ? Check the peripheral circuit of BA5954 Check the cable and circuit between DVD mechanism and BA5954 NoNo Yes Yes No Yes B Check the circuits connecting to the DVD mechanism BoardRefName MONO7602MT1336E MONO7603BA5954 MONO7606MT1379BE Sled automatically moves to inside when it is in outside ? 17 DVD-S540/DV-S5650 DVD-S540 DV-S5650 A 開時、自動的 閉 ? 信号TROUT (MT1336E48)TRI N (MT1336E47) 正 ? 信号 TRCLOSETROPEN 正 ? 信号 LOAD+LOAD- 正 ? DVD接続回路 DVD上 BA5954周辺 NoNo No Yes Yes No Yes 外周側時、自動的内周側 移動 ? 信号 STBY(BA595428) H ? STBY関連回路 信号 FMSO(BA595423) 1. 4V以上 ? 信号SL+ (BA595417) SL-(BA595418) 正 ? DVD 接続 FMSO関連回路 BA5954 No No Yes No Yes Yes No Yes Yes 光 見動作 ? FOSO (BA59541)信号 ? 信号 F+(TP13)F-(TP1) 正 ? DVDBA5954間 回路 NoNo Yes Yes No Yes B 1. MT1379BEBA5954 信号 2. MT1379BE作動 可能性 BA5954周辺回路 MT1336EBA5954間回路 Board Ref Name MONO 7602 MT1336E MONO 7603 BA5954 MONO 7606 MT1379BE 18 DVD-S540/DV-S5650 DVD-S540 DV-S5650 B When read disc, Laser on OK ? No Signal LDO1 and LDO2 are normal ? Voltage of TP22 &TP24 OK ? Check the circuit to connect DVD mechanism or Optical Pick Up maybe damaged Check the peripheral circuit of MT1336E Check the peripheral circuit of two transistor (Ref 7620 & 7621) Check the peripheral circuit of two transistor (Ref 7620 & 7621) No No Yes YesLoad a disc ? Yes Laser off No Focus on OK ? Yes No Signal FEO (pin 18 of MT1336E) correct ? Check the circuit from Pin18 of MT1336E to Pin 205 of MT1379BE Check the circuit between Optical Pick Up and MT1336E Check the peripheral circuit of MT1336E No No Yes Yes Any signal on pins A B C D E F of MT1336E Disc ID correct ? Yes No Check the circuit from Pin 19 of MT1336E to Pin 206 of MT1379BE Check the peripheral circuit of MT1336E and itself. No Signal of Pin 19 (RFL) of MT1336E normal ? Yes Spindle on OK ? No Signal SP+ (Pin 11 of BA5954) & SP- (Pin 12 of BA5954) correct ? Check the connection between spindle driver and BA5954 Check BA5954 (motor driver) and its peripheral circuit No No Yes Yes DMSO (pin 18 of MT1379BE) normal ? Yes Check MT1379BE and its peripheral circuit. C BoardRefName MONO7602MT1336E MONO7603BA5954 MONO7606MT1379BE 19 DVD-S540/DV-S5650 DVD-S540 DV-S5650 B 読取時 ONOK ? No 信号 LDO1LDO2 正常 ? TP22 TP24電圧 OK ? DVD接続回路 光損傷 MT1336E周辺回路 個 （Ref 76207621） 周辺回路 個 （Ref 76207621） 周辺回路 No No Yes Yes搭載 ? Yes OFF No ONOK ? Yes No 信号 FEO(MT1336E18) 正 ? MT1336E18 MT1379BE205 回路 光MT1336E間 回路 MT1336E周辺回路 No No Yes Yes MT1336E A, B, C, D, E, F 信号ON ? I D正 ? Yes No MT1336E19 MT1379BE206 回路 MT1336E周辺回路 No RFL (MT1336E19)信号 正常 ? Yes ONOK ? No 信号SP+ (BA595411)SP- (BA595412)信号 正 ? BA5954間接続 BA5954周辺回路 No No Yes Yes DMSO (MT1379BE18) 正常 ? Yes C MT1379BE周辺回路 Board Ref Name MONO 7602 MT1336E MONO 7603 BA5954 MONO 7606 MT1379BE 20 DVD-S540/DV-S5650 DVD-S540 DV-S5650 C Track on OK ? No Signal TRSO (pin13 of MT1379BE) normal ? Check the connection between Optical Pick Up and BA5954 Check the connection between MT1379BE (pin 13) and MT1336E (pin 26) No No Yes Signal TEO (pin 21 of MT1336E) normal ? Check MT1336E and its peripheral circuit. Yes Signa l T+ (TP3) & T- (TP14) normal ? No Yes Yes Check BA5954 and its peripheral circuit. Disk is READY ?Check RF Signal No Audio signal is normal ? No Output signal is correct ? Check the circuit of filter, amplifier, and mute etc. Check AKM4382A and its periperal circuit No No Yes AKM4382A receive correct data ? Check connection between MT1379BE and AKM4382A Yes Yes TSOP2236, FL display and Key fuction OK ? NoNo TSOP2236, uPD16312GB communicate with MT1379BE OK ? Check connection between MT1379BE and uPD16312GB and its periperal circuit Yes Check Remote Control Chec