欢迎来到收音机爱好者资料库! | 帮助中心 忘不了收音机那份情怀!
收音机爱好者资料库
全部分类
  • 德国收音机>
  • 国产收音机>
  • 日本收音机>
  • 国外收音机>
  • 进口随身听>
  • 卡座/开盘/组合/收录机>
  • CD/VCD/DVD/MD/DAC>
  • DAT/LP唱机>
  • 功放/音响/收扩>
  • 老电视>
  • ImageVerifierCode 换一换

    Yamaha-CDRHD-3100-Service-Manual电路原理图.pdf

    • 资源ID:89526       资源大小:7.95MB        全文页数:70页
    • 资源格式: PDF        下载积分:25积分
    会员登录下载
    三方登录下载: QQ登录
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    Yamaha-CDRHD-3100-Service-Manual电路原理图.pdf

    There are two types of CDR-HD1300; one equipped with a hard disc drive and the other without it depending on market areas. CDR-HD1300E is equipped with a hard disc drive. CDR-HD1300/CDR-HD1300E CDR-HD1300販売地域 搭載、搭載 。 CDR-HD1300E搭載 。 100813 P.O.Box 1, Hamamatsu, Japan I CONTENTS TO SERVICE PERSONNEL . 23 PREVENTION OF ELECTRO STATIC DISCHARGE . 4 FRONT PANELS. 5 REAR PANELS . 56 REMOTE CONTROL PANELS. 7 SPECIFICATIONS. 7 INTERNAL VIEW . 8 DISASSEMBLY PROCEDURE / 分解手順 . 915 SERVICE CHECK PROCEDURES / 手順 . 1619 INSPECTIONS / 検査. 2025 FIRMWARE UPDATE / 更新 . 2627 FORMATTING THE HDD / HDD . 27 Entering ID to main P.C.B. / PCBID書込 . 2829 DISPLAY DATA . 3031 IC DATA . 3239 BLOCK DIAGRAM. 40 PRINTED CIRCUIT BOARD . 4144 SCHEMATIC DIAGRAM . 4549 PARTS LIST. 5067 REMOTE CONTROL. 68 Parts List for Carbon Resistors . 69 SERVICE MANUAL HDD/CD RECORDER CDR-HD1300/CDR-HD1300E IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. RadioFans.CN 收音机爱 好者资料库 Copyright 2002 YAMAHA CORPORATION This manual is copyrighted by YAMAHA and may not be copied or redistributed either in print or electronically without permission. Copyright 2002 YAMAHA CORPORATION This manual is copyrighted by YAMAHA and may not be copied or redistributed either in print or electronically without permission. CDR-HD1300/CDR-HD1300E 2 CDR-HD1300/CDR-HD1300E WALL OUTLET EQUIPMENT UNDER TEST AC LEAKAGE TESTER OR EQUIVALENT INSULATING TABLE I TO SERVICE PERSONNEL 1. Critical Components Information Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohm shunted by 0.15F. GLeakage current must not exceed 0.5mA. GBe sure to test for leakage with the AC plug in both polarities. THE COMPACT DISC RECORDER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and /or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA- SON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food. WARNING: Laser Safety This product contains a laser beam component. This component may emit invisible, as well as visible radiation, which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must be used during servicing of the unit. 1) When testing and/or repairing any component within the product, keep your eyes and skin more than 30 cm away from the laser pick-up unit at all times. Do not stare at the laser beam at any time. 2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere in this manual. 3) CAUTION: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Laser Emitting conditions: 1. This device is a Class IIIb laser device. Class IIIb means With the protective case removed, exposure to the light output from the laser, either directly or reflected by a mirror, can cause harm to the eyes, but there is no danger to the eyes from exposure to dispersed reflected laser light. (Generally 0.5 W or less) 2. Always wear eyeglasses designed for protection against laser light. 3. Always wear gloves. 4. Have no reflective objects anywhere near this device. 5. Figure A shows from where in this device the laser is emitted. 6. When switching on the power to the device for the first time, always measure the laser power with a laser power meter and check that the power is no greater than the number of Watts in the specifications. 7. Never look directly at the laser light while the laser is emitting light. 8. Do not allow the laser light to shine directly on your skin while the laser is emitting light. RadioFans.CN 收音机爱 好者资料库 CDR-HD1300/CDR-HD1300E 3 CDR-HD1300/CDR-HD1300E CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPART PRODUIT LASER DE CLASSE 1 LINE IN LINE OUTINOUT DIGITAL RECCOAXIALOPTICALCOAXIALOPTICAL RS232C VIDEO VIDEO OUT S VIDEO ANALOG PLAY R L R L 43 CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPART PRODUIT LASER DE CLASSE 1 U model CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPART PRODUIT LASER DE CLASSE 1 LINE IN LINE OUTINOUT DIGITAL RECCOAXIALOPTICALCOAXIALOPTICAL RS232C VIDEO VIDEO OUT S VIDEO ANALOG PLAY R L R L 43 CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPART PRODUIT LASER DE CLASSE 1 B, G models VARO!:AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA N K Y M T T M L L E L A S E R - STEILYLLE. L KATSO STEESEEN. VARNING!: OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD. BETRAKTA EJ STRLEN. Laser Radiation Point Fig. A CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. PROTECTION OF EYES FROM LASER BEAM DURING SERVICING This set employs a laser. Therefore, be sure to carefully follow the instructions below when servicing. 1. Laser Diode Properties Material: GaAlAs Wavelength: 780-787 nm Emission Duration: Pulse Laser Output: Read mode 0.7mW (Continuous) Write mode max. 38mW (for 166ns, Min. Cycle 86.6ns) This output is the value measured at the lens of the Laser Pickup Unit. 2. When checking the laser diode emission, keep your eyes more than 30 cm away from the objective lens. CDR-HD1300/CDR-HD1300E 4 CDR-HD1300/CDR-HD1300E I PREVENTION OF ELECTRO STATIC DISCHARGE Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component damage caused by electro static discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test. 2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly. 3. Use only a grounded-tip soldering iron to solder or unsolder ES devices. 4. Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static (ESD protected)” can generate electrical charge sufficient to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices. 6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material). 7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. CAUTION: Be sure no power is applied to the chassis or circuit, and observe all other safety precautions. 8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient to damage an ES device). Grounding for electrostatic breakdown prevention 1. Human body grounding: Use an anti static wrist strap to discharge the static electricity from your body. 2. Work table grounding: Put a grounded conductive material (sheet) or iron sheet on the area where the optical pickup is placed. Caution: The static electricity of your clothes will not be grounded through the wrist strap. So take care not to let your clothes touch the optical pickup. 1M Conductive material (sheet) or steel sheet Anti-static wrist strip CDR-HD1300/CDR-HD1300E 5 CDR-HD1300/CDR-HD1300E CDR-HD1300E I FRONT PANELS CDR-HD1300 I REAR PANELS CDR-HD1300 (U model) CDR-HD1300/CDR-HD1300E 6 CDR-HD1300/CDR-HD1300E CDR-HD1300 (A model) CDR-HD1300 (B, G models) CDR-HD1300 (J model) CDR-HD1300E (B, G models) CDR-HD1300/CDR-HD1300E 7 CDR-HD1300/CDR-HD1300E I REMOTE CONTROL PANEL 435 (17-1/8) 100 (3-15/16) 15.5 (5/8) 115.5 (4-9/16) 11.5 (7/16) 8.3 (5/16) 394.7 (15-1/2) 414.5 (16-5/16) Unit : mm (inch) 単位: mm () I SPECIFICATIONS / 参考仕様 GENERAL / 一般仕様 Model / . HDD / CD recorder Application disks / 対応. CDs, CD-Rs for AUDIO, CD- RWs for AUDIO HDD capacity / HDD容量 . 40GB (CDR-HD1300E) and up to 137GB by replacing Power supply / 電源電圧 U model .AC 120 V 60 Hz A model .AC 240 V 50 Hz B, G models .AC 230 V 50 Hz J model. AC 100 V 50/60 Hz Power consumption / 消費電力 U, A, B, G models . 37 W J model. 32 W Standby power consumption / 待機電力 . 0 W Operating temperature / 動作温度 . + 5 C to + 35 C Max. dimensions / 最大寸法 (W x H x D) . 435 x 115.5 x 414.5 mm (17-1/8 x 4-9/16 x 16-5/16) (include legs, terminals and knobs) Weight / 質量 CDR-HD1300 with no HDD . 7.8 kg (17 lbs. 3 oz.) CDR-HD1300E with HDD . 8.4 kg (18 lbs. 8 oz.) Panel color / 色 Gold Color . G, J models Black Color . U, A, B, G models AUDIO PERFORMANCE / 性能 Output level / 出力 (1kHz 0dB) . 2 0.5 Vrms Frequency characteristics / 周波数特性 (EIAJ) 5Hz to 20kHz. 0.5 dB Playback signal to noise ratio / 再生SN比 (EIAJ) .105 dB or more DIMENSIONS Playback dynamic range / 再生 (EIAJ) .99 dB or more Playback THD + noise / 再生歪率+雑音 (EIAJ) .0.004 % or less Recording signal to noise ratio / 録音SN比 (EIAJ) .92 dB or more Recording dynamic range / 録音 (EIAJ) .92 dB or more Recording THD + noise / 録音歪率+雑音 (EIAJ) .0.006 % or less INPUT/OUTPUT / 入出力仕様 LINE OUTPUT / 出力 Output level . 2 Vrms Output resistance .990 ohms LINE INPUT / 入力 Input sensitivity . 500 mVrms Input impedance . 24 k-ohms (REC LEVEL Max.) DIGITAL OUTPUT / 出力 Coaxial output level .

    注意事项

    本文(Yamaha-CDRHD-3100-Service-Manual电路原理图.pdf)为本站会员(cc518)主动上传,收音机爱好者资料库仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知收音机爱好者资料库(点击联系客服),我们立即给予删除!

    温馨提示:如果因为网速或其他原因下载失败请重新下载,重复下载不扣分。




    ADZZ
    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2025 收音机爱好者资料库 版权所有
    备案编号:鄂ICP备16009402-5号

    收起
    展开