Philips-DVP-3136-Service-Manual电路原理图.pdf
. Technical Specifications.1-2 . Safety Instruction, Warning & Notes.1-3 . Mechanical and Dismantling Instructions.2-1 . Region Code, Software Version& Upgrades.3-1 . Trouble Shooting Chart.4-1 . Wiring Diagram.5-1 . Electrical Diagrams and Print-layouts.6-1 . Set Mechanical Exploded View & Electrical Part list.7-1 . Revision List.8-1 TABLE OF CONTENTS Page 3139 785 32840 Version 1.0 DVP3136/94 Service Manual PHILIPS GB ©Copyright 2007 Philips Consumer Electronics B.V. Eindhoven, The Netherlands All rights reserved. No part of this publication may be reproduced, stored in aretrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips. CLASS 1 LASER PRODUCT Published by TCL-HY 0707 Service Audio Printed in The Netherlands Subject to modification DVP3136/94 Service DVD Player Technical Specifications TV standard (PAL/50Hz) (NTSC/60Hz) Number of lines 625 525 Playback Multi standard (P AL/NTSC) Video performance Video DAC 14 bit YPbPr 0.7Vpp - 75 ohm Video output 1Vpp - 75 ohm Video format Digital Compression MPEG 2 for DVD,SVCD MPEG 1 for VCD DVD 50Hz 60Hz Horiz resolution 720 pixels 720 pixels Vertical resolution 576lines 480 lines VCD 50Hz 60Hz Horiz. resolution 352 pixels 352 pixels Vertical resolution 288lines 240 lines Audio format Digital MPEG/AC-3/ Compressed PCM Digital 16, 20, 24bits fs, 44.1, 48, 96kHz MP3(ISO 9660) 96,112,128,256kbps & variable bit rate fs,32, 44.1,48 kHz Analogue Sound Stereo Dolby surround compatible downmix from Dolby Digital multi-channel sound Audio performance DA converter 24bits, 192KHz DVD fs 96kHz 4Hz-44kHz fs 48kHz 4Hz-22kHz SVCD fs 48kHz 4Hz-22kHz fs 44.1kHz 4Hz-20kHz CD/ VCD fs 44.1kHz 4Hz-20kHz Line Output Signal-Noise (1kHz) >70dB Dynamic Range (1kHz) >60dB Cross talk (1kHz) >70dB Distortion/Noise (1kHz) >65dB Spearker Output Signal-Noise(1KHz) >70dB Dynamic range(1KHz) >60dB Crosstalk (1KHz) >60dB Distortlon/noise(1KHz) >-62dB Speaker Power Output 10%THD 6 button to confirm, then screen will display : Firmware Upgrade Programming, Please Wait. Do not Switch the Player Off ! 4) The upgraded disc will automatically out when files coping complete, then take out the disc. 5) About 1 minute later, the tray will automatically close when upgrading complete. B. Read out the software versions to confirm upgrading 1) Power on e set and Open the tray door. 2) Press button to check the software information. The software version and other information are display on the TV screen as follows: BE Version: DVP3XXXXX_XX.XX FE Version: DCX.XXXXXX.XX.XX DSP Version: DSP.XX Region Code: X 3-1 Caution: The set must not be power off during upgrading, Otherwise the Main board will be damaged entirely.