Philips-DVP-3310-Service-Manual电路原理图.pdf

TABLE OF CONTENTS Page Version 1.0 Service Manual . Technical Specifications.1-2 . Safety Instruction, Warning IEC6 1 9 3 7forMPEG1 /2, DolbyDigital Main unit Dimensions( wxhxd):360x3 7x209 (mm) Net Weight: approximately 1.3 kg Power P owersupplyrating:1 1 0V-2 40V ;50/ 60 Hz P owerc onsumption: button to confirm, then screen will display : Firmware Upgrade Programming, Please Wait. Do not Switch the Player Off ! 4) The upgraded disc will automatically out when files coping complete, then take out the disc. 5) About 1 minute later, the tray will automatically close when upgrading complete. B. Read out the Firmware version to confirm the upgrading 1) Power on the set and Open the tray door. 2) Press button to check the software information. The software version and other information are display on the TV screen as follows: BE Version: DVP33XX_XX.XX FE Version: XXXX.XXXXXX DSP Version: DSP.XX Region Code: X 4-1 Caution: The set must not be power off during upgrading, Otherwise the Main board will be damaged entirely. OK Cancel Region Code Change 1) Power on the set and open the tray door; 2) Press “9“ “8“ “7“ “9“ and press the regioncode number (0-6) on the remote control.Notes:restart after above steps.