Philips-DVP-3000-K-Service-Manual电路原理图.pdf
. Technical Specifications.1-2 . Safety Instructions, Warnings, Notes.1-3 . Mechanical and Dismantling Instructions.2-1 . Region Code, Software Version& Upgrades.3-1 . Trouble Shooting Chart.4-1 . Block and Wiring Diagram.5-1 . Electrical Diagrams and Print-layouts Front Board.6-1 Power Board.7-1 Main Board.8-1 . Set Mechanical Exploded view& Parts List.9-1 . Revision List.10-1 DVD Player DVP3000K, DVP3005K, DVP3005, DVP3010 Service TABLE OF CONTENTS Page 3139 785 30950 Version 1.0Service ManualPHILIPS GB Copyright 2005Philips Consumer Electronics B.V. Eindhoven, The Netherlands All rights reserved. No part of this publication may be reproduced, stored in aretrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips. CLASS 1 LASER PRODUCTPublished by TCL-KC 0501 Service Audio Printed in The Netherlands Subject to modificationC DVP3000K/69/93 DVP3005K/03/13/69/75/93DVP3005/00/02/04/05/78 DVP3010/00/02/04/05 Technical Specifications TV standard (PAL/50Hz) (NTSC/60Hz) Number of lines 625 525 Playback Multi standard (PAL/NTSC) Video performance Video DAC 12 bit, 108mH PbPr: 0.7Vpp - 75ohm Video output 1Vpp - 75ohm Video format Digital Compression MPEG 2 for DVD,SVD MPEG 1 for VCD DVD 50Hz 60Hz Horiz. resolution 720 pixels 720 pixels Vertical resolution 576lines 480 lines VCD 50Hz 60Hz Horiz. resolution 352 pixels 352 pixels Vertical resolution 288lines 240 lines Audio format Digital MPEG/AC-3/ Compressed Digital PCM 16, 20, 24bits fs, 44.1, 48, 96kHz MP3(ISO 9660) 96,112,128,256kbps & variable bit rate fs,32, 44.1,48 kHz Analogue Sound Stereo Dolby surround-compatible downmix from Dolby Digital multi-channel sound Audio performance DA converter 24bits, 192KHz DVD fs 96kHz 4Hz-44kHz fs 48kHz 4Hz-22kHz SVCD fs 48kHz 4Hz-22kHz fs 44.1kHz 4Hz-20kHz CD/VCD fs 44.1kHz 4Hz-20kHz Signal-Noise (1kHz) >95dB Dynamic Range (1kHz) >85dB Cross talk (1kHz) >90dB Distortion/Noise (1kHz) >80dB MPEG MP3 MPEG Audio L3 Audio L+R output: 1.02.0 Vpp into 10K ohm Connections YpbPr Cinch 3x Video output Cinch( yellow) Audio L+R output Cinch (white/red) Digital output 1 coaxial IEC60958 for CDDA/LPCM IEC61937 for MPEG1/2, Dolby Digital Cabinet Dimensions (w X h X d) 360 X 43 X 265mm Weight Approximately 2.0 kg Power consumption Power supply 230V for 00/02/03/04/05/13/69/75/93 120230V for /78 Power consumption in standby mode button to confirm, then screen will display : Files coping UPGRADING 3) The upgraded disc will automatically out when files coping complete, then take out the disc. 4) About 1 minute later, the trace will automatically close when upgrading complete. C. Read out the software versions to confirm upgrading 1) Power up the set and press button on the remote control. 2) Press button. The software version and other information are display on the TV screen as follows: Version XX.XX.XX.XX (Main version) SUB-VER XX.XX.XX.XX ( software version of application software) 8032 XX.XX.XX.XX Servo XX.XX.XX.XX (software version of Servo) RISC XX.XX.XX.XX DSP XX.XX.XX.XX Region Code X 3-1Caution: The set must not be power off duringupgrading, in that case the decoder board willbe damaged entirely.
