Delmonico-4TR20S-tape-sm维修电路原理图.pdf

PnoTo FAcr FolJti.iiiilri:i:fi,iiiii#L1.1.r1r.:ii:d,llroJot!sFurt/tDETMONTCO (TAPE DECK)MODET 4TR-2OSTRADE NAME Delmonico Model 4TR-20SSUPPLIER Delmonico International Corp. , 120-20 Roosevelt Ave., New York 68, New YorkTYPE SET Two Speed AC Operated, Four Track Stereo Tape DeckPOWER SUPPLY 110 - 11? Volts AC, 60 CyclesFUNCTION OF CONTROLSlYIelErl6 ralH EIgHlatrtrt6-2Record LockDepress to lock amplifier in the Record position.Quick StopPull the lever toward the front ofthe deck to stoptape motion momentarily.Speed SelectorDepress for 7 l/ 2 ips and up for 3 3/4 ips.Function SelectorSelects the mode of operation, Rewind, PlayRecord, or Fast Forward.Fast Forward LockDepress and turn the Function Selector to PlayRecord to advance tape rapidly.Power SwitchTurns the power on and off to the tape deck.CLEANINGPressure roller (2), capstan, play-record head(5), erase head (20), and tape guides (19), accumu-late tape oxide coating, which wears off the tape as itpasses these parts. Use a soft cloth dipped in alcohqlto remove this accumulation.HCDWARD W. SAlulS & tG(O.,The listing of any available replacement part herein does not constitutein any case a recommendation, warranty or guaranty by Howard W. Sams& Co., Inc., as to the quality and suitability of such replacement part. Thenumbers of these parts have been compiled from information fwnished toHoward W. Sams & Co., Inc., by the manufacturers of the particular typeof replacement part listed.MN304VolumeInner knob regulates the volume on the left chan-nel and the outer knob regulates the volume on theright channel.SelectorSelects the recording or playbaek tracks, Stereo-Mono 1-4, or Mono 2-3.MicrophoneInsert microphone or microphones into thesejacks when making a recording.Record Level MetersTpo metersare provided to indicate thecorrectrecordinglevel. One for left channel andone for rightchannel.LU BR I CATIONAII sliding levers should be cleaned occasionallyandlubricated with a nonhardening grease. This motorbearings should be lubrlcated with one or two drops ofgood motor oil.I tf G. lndianapolis i, lndianaReproduction or use, without express permission, of editorial or pictorialcontent, in any manner, is prohibited. No patent liability is assumed withrespect to the use of the information contained herein. O 1963 Howard W.Sams & Co., Inc., Indianapolis 6, Indiana. Printed in U. S. of Americavlm-o.o.o.TIol-gmno6DATE II -63sET 666 FOTDERRadioFans.CN 收音机爱 好者资料库OPERATI NG I NSTRUCTI ONSTo Record1. Plaee a reel of tape on the supply (feft) spin-dle and thread the tape from left to right2. Select the desired speed.3. Connect the sound source to the tape deck am-plifier.4. Select the proper tracks to record onl StereoMon. l-4, or Mon. 2-3.5. Depress the Record Lock and turn the FunctionSelector to Play-Record simultaneously.6. Turn volume control(s) until the record levelmeter(s) fluctuate in the correct area of themeter(s).7. To stop recording, return Function Selector tothe Stop position.RavindTurn Function Selector to Rewind to rewind thetape onto the supply reelFast ForwardDepress the Fast Forward Lock and simultan-eously turn the Function Seleetor to play-Record po-sition to advance the tape to a desired spot rapidly.Playing a Recorded Tape1. Place the reel of tape on the supply spindle (left)and thread the tape from left to right.2. Select the correct speed.3. Turn Selector to the positionwhich correspondsto the tape.4. Turn Function Seleetor toPlay-Record position.5. Adjust the volume control(s)to desired listeninglevel.Eras i ng Recorded MaterialAny recording is automatically erased before anew recording is put on the tape when it is in Recordposition. To erase a recording without putting newmaterial on the tape, proceed as follows:1. Thread the tape.2. Turn Selector to tracks to be erased.3. Turn the volume control to its minimum counter-c,lockwise position.4. Depress the Reeord Lock and simultaneouslyturn Function Selector to Play-Record position.5. Use same procedure to erase the remainingtracks if so desired.Qua rter-T rack Recordi ngOne-fourth of the tape width ls recorded at atime, thereby resulting in four-track recording. Thisfour-track recording is aceomplished in the followingmanner:1. Thread the tape.2. Turn Selector to Mono. 1-4.3. Proceed as described under To Record.4. Afterthe flrsttrack isrecorded, andall thetapewound onto the takeup reel, return the FunctionSelector to StoP.5. Remove the reels, turn them over, place tte fullreel on the supply (tett) splndle, rethread, thetape and continue the recording.6. After this track, which is track 4, is recorded,return the Function Selector to Stop.7. Turn the Selector to Mono. 2-3.8. Remove the reels, turn them over, place thefull reel on the supply (left) spindle,. rethreadthe tape, and continue the recording.9. After this track, whlch is track 2, ls recorded,turn the Frietion Selector to Stop.10. Remove the reels, turn them over, place thefull reel on the supply (left) spindle, rethreadthe tape, and contlnue recording.11. The tape may be played back in the same man-ner.ADJUSTMENTSPlay-Record HeadThe recording head (5) must be aligned with thetape. If it is not, low output, loss of high frequencies,or track overlap may result. To align the head, ad-iust as follows:1. Thread an alignment tape onto the recorder.2. Adjust the three spring-Ioaded mounting screwsuntil the top of the tape is aligned evenly withthe top edge of the record head lamination.3. To adjust for maximum freguency response,adjust the two front spring-loaded screws.4. Recheck the head height.Erase Head1. Thread a tape onto the recorder.2 Adjust the three sprtng-loaded screws untilthe erase head is parallel with the tape and thetop edge of the tape is aligned evenly with thetop edge of the erase head lamination.RadioFans.CN 收音机爱 好者资料库