Aiwa-NSXSZ30-cs-sm维修电路原理图.pdf

SERVICE MANUALDATACOMPACT DISCSTEREO SYSTEMBASIC TAPE MECHANISM : 6ZM-3 PR2NM / ZZM-3 YPR1NMBASIC CD MECHANISM : AZG-1NSX-SZ30NSX-SZ36HS,HTLHS/M Code No. 09-007-423-3R1REVISION If requiring information about the CD mechanism, see Service Manual of AZG-1, (S/M Code No. 09-001-335-3N8). This Service Manual is the “Revision Publishing” and replaces“Simple Manual” (S/M Code No. 09-007-423-3T3).SYSTEMTAPE MECHANISMCD MECHANISMZZM-3 YPR1NMAZG-1 ZD3RDMNSX-SZ30NSX-SZ366ZM-3 PR2NMAZG-1 YZD3RDMNSX-SZ30SPEAKERSYSTEMCDCASSEIVERREMOTECONTROLLERNSX-SZ36CX-NSZ30CX-NSZ36RC-ZAS01SX-NSZ52RC-ZAS02RadioFans.CN 收音机爱 好者资料库 2 SPECIFICATIONSTuning range87.5 MHz to 108 MHzUsable sensitivity (IHF)13.2 dBfAntenna terminals75 ohms (unbalanced)Tuning range531 kHz to 1602 kHz (9 kHz step)530 kHz to 1710 kHz (10 kHz step)Usable sensitivity350 V/mAntennaLoop antenna Tuning range5.730 MHz to 17.900 MHzUsable sensitivity40 V (IEC)AntennaWire antennaPower outputLH:Rated: 65 W + 65 W (6 ohms, THD 1%,1 kHz)Reference: 80 W + 80 W (6 ohms,THD 10%, 1 kHz)HS,HT:Rated: 40 W + 40 W (6 ohms, THD 1%,1 kHz)Reference: 50 W + 50 W (6 ohms,THD 10%, 1 kHz)Total harmonic distortion 0.08% (25 W, 1 kHz, 6 ohms,DIN AUDIO)InputsVIDEO/AUX: 500 mVHS,HT only: MIC: 1.0 mV (10 K ohms)OutputsSPEAKERS: accept speakers of6 ohms or morePHONES (stereo jack) : acceptsheadphones of 32 ohms or moreTrack format4 tracks, 2 channels stereoFrequency response50 Hz 15 kHzRecording systemAC biasHeadsDeck 1 : Playback head x 1Deck 2 : Recording/Playback head x 1, erase head x 1LaserSemiconductor laser ( =780 nm)D-A converter1 bit dualSignal-to-noise ratio85 dB (1 kHz, 0 dB)Harmonic distortion0.05 % (1 kHz, 0 dB)Power requirementsLH,HT: 120 V/220-230 V/240 V AC(switchable), 50/60 HzHS: 220 V AC, 60 HzPower consumptionLH: 125 WHS,HT: 80 WPower consumption in standby modeWith power-economizing mode offLH: 17 WHS,HT: 13 WWith power-economizing mode on0.9 WDimensions of main unit260 x 328 x 335 mm(W x H x D)Weight of main unit6.3 kgSpeaker system3 way, bass reflex (magneticshielded type)Speaker unitsWoofer:140 mm cone typeTweeter:60mm cone typeSuper tweeter:20 mm ceramic typeImpedance6 ohmsOutput sound pressure level 87 dB/W/mDimensions (W x H x D)240 x 324 x 270 mmWeight4.0 kg Design and specifications are subject to change without notice. The word BBEand the BBE symbol are trademarks of BBE Sound, Inc. Under license from BBE Sound,Inc.RadioFans.CN 收音机爱 好者资料库 3 CLASS 1LASER PRODUCTKLASSE 1LASER PRODUKTLUOKAN 1LASER LAITEKLASS 1LASER APPARATThis set employs laser. Therefore, be sure to follow carefullythe instructions below when servicing.WARNING!WHEN SERVICING, DO NOT APPROACH THE LASEREXIT WITH THE EYE TOO CLOSELY. IN CASE IT ISNECESSARY TO CONFIRM LASER BEAM EMISSION.BE SURE TO OBSERVE FROM A DISTANCE OF MORETHAN 30cm FROM THE SURFACE OF THE OBJEC-TIVE LENS ON THE OPTICAL PICK-UP BLOCK.sCaution: Invisible laser radiation whenopen and interlocks defeated avoidexposure to beam.sAdvarsel: Usynlig laserstling ved bning,nr sikkerhedsafbrydere er ude af funktion.Undg udsttelse for strling.VAROITUS!Laiteen Kyttminen muulla kuin tss kyttohjeessamainitulla tavalla saataa altistaa kyt-tjnturvallisuusluokan 1 ylittvlle nkymttmllelasersteilylle.VARNING!Om apparaten anvnds p annat stt n vad somspecificeras i denna bruksanvising, kan anvndarenutsttas fr osynling laserstrlning, som verskridergrnsen fr laserklass 1.PROTECTION OF EYES FROM LASER BEAM DURING SERVICINGCAUTIONUse of controls or adjustments or performance of proce-dures other than those specified herin may result inhazardous radiation exposure.ATTENTIONLutillisation de commandes, rglages ou procduresautres que ceux spcifis peut entraner une dangereuseexposition aux radiations.ADVARSELUsynlig laserstling ved bning, nr sikkerhedsafbrydereerude af funktion. Undg udsttelse for strling.This Compact Disc player is classified as a CLASS 1LASER product.The CLASS 1 LASER PRODUCT label is located on therear exterior.Precaution to replace Optical block(KSS-213F)1) After the connection, remove solder shown inthe right figure.Body or clothes electrostatic potential could ruinlaser diode in the optical block. Be sure groundbody and workbench, and use care the clothesdo not touch the diode.Solder(KSS 213F)PICKUP Assy P.C.B.RadioFans.CN 收音机爱 好者资料库 4 NOTE ON BEFORE STARTING REPAIRCharging voltage (V)Discharging Rated power (W)Parts number(C101, 102)resistor ()25-48100387-A00-247-09049-140220587-A00-232-090Note: The reference numbers (C101, C102) of the electrolytic capacitors can change depending on the models. Be sure to check thereference numbers of the charging capacitors on schematic diagram before starting the discharging work.2. Check items before exchanging the MICROCOMPUTERBe sure to check the following items before exchanging the MICROCOMPUTER. Exchange the MICROCOMPUTER after confirmingthat the MICROCOMPUTER is surely defective.2-1. Regarding the HOLD terminal of the MICROCOMPUTERWhen the HOLD terminal (INPUT) of the MICROCOMPUTER is “H”, the MICROCOMPUTER is judged to be operating correctly.When this terminal is “L”, the main power cannot be turned on. Therefore, be sure to check the terminal voltage of the HOLDterminal before exchange.When the MICROCOMPUTER is not defective, the HOLD terminal can also go “L” when the POWER AMPLIFIER has anyabnormalities that triggers the abnormality detection circuit on the MAIN C. B. that sets the HOLD terminal to “L”.Good or no good judgement of the MICROCOMPUTER11111Turn on the AC main power.22222Confirm that the main power is turned on and the HOLD terminal of the MICROCOMPUTER keeps the “H” level or not.33333When the HOLD terminal is “L” level, the abnormality detection circuit is judged to be working correctly and theMICROCOMPUTER is judged to be good.1. Forced discharge of electrolytic capacitor of power supply blockWhen repair is going to be attempted in the set that uses relay circuit in the power supply block, electric potential is kept charged acrossthe electrolytic capacitors (C101, 102) even though AC power cord is removed. If repair is attempted in this condition, secondary defectcan occur.In order to prevent the secondary trouble, perform the following measures before starting repair work.Discharge procedure11111Remove the AC power cord.22222Connect a discharging resistor at an end of lead wire thathas clips at both ends. Connect the other end of the leadwire to metal chassis.33333Contact the other end of the discharging resistor to thepositive (+) side (+VH) of C101. (For two seconds)44444Contact the same end of the discharging resistor as step33333 to the negative (-) side (-VH) of C102 in the same way.(For two seconds)55555Check that voltage across C101 and C102 has decreasedto 1 V or less using a multimeter or an oscilloscope.Select a discharging resistor referring to the following table.Fig-1MAIN C.BD101C101C1022234RadioFans.CN 收音机爱 好者资料库 5 In such a case, check also if the POWER AMPLIFIER circuit or power supply circuit has any abnormalities or not.2-2. Regarding resetThere are cases that the machine does not work correctly because the MICROCOMPUTER is not reset even though the AC powercord is re-inserted, or the software reset (pressing the STOP key + POWER key) is performed.When the above described phenomenon occurs, it can lead to wrong judgement as if the MICROCOMPUTER is defective and toexchange the MICROCOMPUTER. In such a case, perform the forced-reset by the following procedure and check good or nogood of the MICROCOMPUTER.11111Remove the AC power cord.22222Short both ends of the electrolytic capacitor C113 that is connected to VDD of the MICROCOMPUTER with tweezers.33333Connect the AC power cord again. If the MICROCOMPUTER returns to the normal operation, the MICROCOMPUTER isgood.Note: The reference number or MICROCOMPUTER pin number of transistor (Q110) and electrolytic capacitor (C113) can change dependingon the models. Be sure to check the reference numbers on schematic diagram before starting the discharging work.2-3. Confirmation of soldering state of MICROCOMPUTERCheck the soldering state of the MICROCOMPUTER in addition to the above described procedures. Be sure to exchange theMICROCOMPUTER after surely confirming that the trouble is not caused by poor soldering but the MICROCOMPUTER itself.Fig-2-2MICRO-COMPUTERMICROCOMPUTERFRONT C.BFRONT C.BVSSVDDC113*%C1131815Short with tweezers.RadioFans.CN 收音机爱 好者资料库 6 ELECTRICAL MAIN PARTS LISTDESCRIPTIONREF. NO.KANRINO.PART NO.DESCRIPTIONREF. NO.KANRINO.PART NO.IC 87-070-127-110 IC,LC72131 D 87-A21-398-010 IC,STK490-110 87-A21-401-040 C-IC,M61503FP 87-A21-482-010 IC,RPM6938-H4 87-A21-560-010 IC,LA1844L-A 87-A21-419-040 C-IC,NJM14558MD-TE2 8A-NF9-604-110 C-IC,UPD780226GF-019-3BA 87-A21-269-010 IC,EW732 87-020-454-010 IC,DN6851TRANSISTOR 87-026-609-080 TR,KTA1266GR 89-213-702-010 TR,2SB1370 (1.8W) 87-026-610-080 TR,KTC3198GR 87-A30-076-080 C-TR,2SC3052F 87-A30-075-080 C-TR,2SA1235F 87-026-245-080 TR,DTC114ES 87-A30-198-080 TR,KTC3199GR 87-A30-107-070 C-TR,CMBT5401 87-A30-106-040 C-TR,CMBT5551 87-A30-091-080 FET,2SJ460 87-A30-062-080 C-TR,KRC104S 87-A30-090-080 FET,2SK2541 89-333-317-880 TR,2SC3331 (0.5W) 87-A30-318-080 TR,CSA952K 87-A30-329-080 TR,CD1585BC 87-A30-074-080 C-TR,RT1P 141C 87-A30-468-080 C-TR,KRC102S-RTK 87-A30-087-080 C-FET,2SK2158 87-A30-086-040 C-TR,CSD1306E 89-503-602-080 C-FET,2SK360E 87-A30-234-080 TR,CSC4115BC 89-327-143-080 TR,2SC2714(O)(0.1W) 87-A30-072-080 C-TR,RT1P 144CDIODE 87-A40-455-090 DIODE,RL203 GW 87-A40-553-080 DIODE,1N4003 LES 87-A40-776-080 ZENER,UZ27BSD 87-A40-764-080 ZENER,UZ10BSC 87-A40-313-080 C-DIODE,MC 2840 87-A40-270-080 C-DIODE,MC2838 87-A40-269-080 C-DIODE,MC2836 87-A40-752-080 ZENER,UZ6.2BSC 87-A40-739-080 ZENER,UZ2.7BSA 87-020-465-080 DIODE,1SS133 87-A40-854-080 ZENER,UZ15BSA 87-A40-535-080 DIODE,1N5393-GOODARK 87-017-149-080 ZENER,HZS6A2LMAIN C.B C3 87-012-368-080 C-CAP,S 0.1-50 F C4 87-012-368-080 C-CAP,S 0.1-50 F C5 87-012-368-080 C-CAP,S 0.1-50 F C6 87-012-368-080 C-CAP,S 0.1-50 F C9 87-012-368-080 C-CAP,S 0.1-50 F C10 87-012-368-080 C-CAP,S 0.1-50 F C11 87-012-368-080 C-CAP,S 0.1-50 F C12 87-012-368-080 C-CAP,S 0.1-50 F C19 87-A12-036-000 CAP,E 2200-63 SMG C20 87-A12-036-000 CAP,E 2200-63 SMG C21 87-A10-520-000 CAP,E 3300-35 M SMG C22 87-A10-520-000 CAP,E 3300-35 M SMG C25 87-010-385-080 CAP, ELECT 220-25V C26 87-010-247-080 CAP, ELECT 100-50V C30 87-010-430-080 CAP, ELECT 100-63 C31 87-010-263-080 CAP, ELECT 100-10V C32 87-010-197-080 CAP, CHIP 0.01-25 K B C34 87-010-247-080 CAP, ELECT 100-50V C35 87-010-380-080 CAP, ELECT 47-16 M C36 87-010-381-080 CAP, ELECT 330-16V C38 87-010-197-080 CAP, CHIP 0.01-25 K B C60 87-010-403-080 CAP, ELECT 3.3-50V C61 87-010-260-080 CAP, ELECT 47-25V C97 87-010-196-080 CHIP CAPACITOR,0.1-25 C101 87-010-185-080 C-CAP,S 3900P-50 B C102 87-010-185-080 C-CAP,S 3900P-50 B C103 87-010-545-080 CAP,E 0.22-50 M C104 87-010-545-080 CAP,E 0.22-50 M C105 87-010-187-080 CAP CHIP S5600P C106 87-010-187-080 CAP CHIP S5600P C107 87-010-404-080 CAP, ELECT 4.7-50V C108 87-010-404-080 CAP, ELECT 4.7-50V C109 87-010-179-080 C-CAP,S 1200P-50 K B C110 87-010-179-080 C-CAP,S 1200P-50 K B C111 87-010-391-080 CAP,E 10-35 SME C112 87-010-391-080 CAP,E 10-35 SME C113 87-010-866-080 CAP, ELECT 10-63 C113 87-010-405-080 CAP, ELECT 10-50V C114 87-010-866-080 CAP, ELECT 10-63 C114 87-010-405-080 CAP, ELECT 10-50V C119 87-012-369-080 C-CAP,S 0.047-50 ZF C119 87-016-369-080 C-CAP,S 0.033-25 KB C120 87-012-369-080 C-CAP,S 0.047-50 ZF C120 87-016-369-080 C-CAP,S 0.033-25 KB C125 87-012-368-080 C-CAP,S 0.1-50 F C126 87-012-368-080 C-CAP,S 0.1-50 F C127 87-012-368-080 C-CAP,S 0.1-50 F C128 87-012-368-080 C-CAP,S 0.1-50 F C129 87-010-191-080 C-CAP,S 0.015-50 F C130 87-010-191-080 C-CAP,S 0.015-50 F C131 87-010-197-080 CAP, CHIP 0.01-25 K B C132 87-010-197-080 CAP, CHIP 0.01-25 K B C133 87-010-186-080 CAP,CHIP 4700P-50 K C140 87-010-182-080 C-CAP,S 2200P-50 B C141 87-010-196-080 CHIP CAPACITOR,0.1-25 C239 87-010-196-080 CHIP CAPACITOR,0.1-25 C301 87-010-178-080 C-CAP,S 1000-50 K B C302 87-010-178-080 C-CAP,S 1000-50 K B C303 87-010-178-080 C-CAP,S 1000-50 K B C304 87-010-178-080 C-CAP,S 1000-50 K B C307 87-010-263-080 CAP, ELECT 100-10V C308 87-010-263-080 CAP, ELECT 100-10V C309 87-010-318-080 C-CAP,S 47P-50 CH C310 87-010-318-080 C-CAP,S 47P-50 CH C313 87-010-188-080 CAP,CHIP 6800P C314 87-010-188-080 CAP,CHIP 6800P C315 87-010-263-080 CAP, ELECT 100-10V C317 87-010-546-080 CAP, ELECT 0.33-50V C318 87-010-546-080 CAP, ELECT 0.33-50V C326 87-010-198-080 CAP, CHIP 0.022-25 K C327 87-012-368-080 C-CAP,S 0.1-50 F C360 87-010-401-080 CAP, ELECT 1-50V C399 87-012-140-080 C-CAP,S 470P-50 J C401 87-010-544-080 CAP, ELECT 0.1-50V C402 87-010-544-080 CAP, ELECT 0.1-50V C403 87-010-321-080 CHIP CAPACITOR,82P(J) C404 87-010-321-080 CHIP CAPACITOR,82P(J) C405 87-010-197-080 CAP, CHIP 0.01-25 K B C406 87-010-197-080 CAP, CHIP 0.01-25 K B C407 87-010-197-080 CAP, CHIP 0.01-25 K B C408 87-010-197-080 CAP, CHIP 0.01-25 K B C409 87-010-182-080 C-CAP,S 2200P-50 B C410 87-010-182-080 C-CAP,S 2200P-50 B C411 87-010-405-080 CAP, ELECT 10-50V C412 87-010-405-080 CAP, ELECT 10-50VRadioFans.CN 收音机爱 好者资料库 7 DESCRIPTIONREF. NO.KANRINO.PART NO.DESCRIPTIONREF. NO.KANRINO.PART NO. C452 87-010-382-080 CAP, ELECT 22-25V C453 87-010-183-080 C-CAP,S 2700P-50 B C454 87-010-183-080 C-CAP,S 2700P-50 B C455 87-010-183-080 C-CAP,S 2700P-50 B C456 87-010-197-080 CAP, CHIP 0.01-25 K B C460 87-010-196-080 CHIP CAPACITOR,0.1-25 C461 87-012-158-080 C-CAP,S 390P-50 CH C462 87-012-158-080 C-CAP,S 390P-50 CH C605 87-010-179-080 CAP,CHIP S 1200P-50 KB C605 87-010-184-080 CAP,CHIP S 3300P-50 KB C606 87-010-179-080 CAP,CHIP S 1200P-50 KB C606 87-010-184-080 CAP,CHIP S 3300P-50 KB C609 87-010-213-080 C-CAP,S 0.015-50 B C610 87-010-213-080 C-CAP,S 0.015-50 B C611 87-010-545-080 CAP, ELECT 0.22-50V C612 87-010-545-080 CAP, ELECT 0.22-50V C613 87-010-545-080 CAP, ELECT 0.22-50V C614 87-010-545-080 CAP, ELECT 0.22-50V C615 87-010-154-080 CAP CHIP 10P-50 CH C616 87-010-221-080 CAP, ELECT 470-10 M C617 87-010-221-080 CAP, ELECT 470-10 M C618 87-010-405-080 CAP, ELECT 10-50V C630 87-016-669-080 C-CAP,S 0.1-25 K B C631 87-010-185-080 C-CAP,S 3900P-50 B C632 87-010-185-080 C-CAP,S 3900P-50 B C633 87-016-369-080 C-CAP,S 0.033-25 K B C634 87-016-369-080 C-CAP,S 0.033-25 K B C669 87-010-322-080 C-CAP,S 100P-50 CH C670 87-010-322-080 C-CAP,S 100P-50 CH C671 87-010-196-080 CHIP CAPACITOR,0.1-25 C672 87-010-196-080 CHIP CAPACITOR,0.1-25 C673 87-010-182-080 C-CAP,S 2200P-50 B C677 87-010-197-080 CAP, CHIP 0.01-25 K B C771 87-010-263-080 CAP, ELECT 100-10V C772 87-010-197-080 CAP, CHIP 0.01-25 K B C782 87-010-197-080 CAP, CHIP 0.01-25 K B C783 87-010-197-080 CAP, CHIP 0.01-25 K B C784 87-010-197-080 CAP, CHIP 0.01-25 K B C785 87-010-197-080 CAP, CHIP 0.01-25 K B C786 87-010-197-080 CAP, CHIP 0.01-25 K B C788 87-010-149-080 C-CAP,S 5P-50 CH C789 87-A10-801-080 C-CAP,S 0.022-16 J B C789 87-A12-052-080 C-CAP,S 0.033-25 J B C790 87-A10-801-080 C-CAP,S 0.022-16 J B