Cambridge-640C-cd-sm维修电路原理图.pdf

Gallery Court Hankey Place London SE1 4BB UK Tel: +44 (0)20 7940 2200 Fax: +44 (0)20 7940 2233 640C 640C Issue Date: 22nd December 2004 _ SERVICE MANUAL _ SPECIFICATIONS: D/A Converter Wolfson WM8740 24-Bit/192kHz Capable Freq response (-0.5dB) 10Hz to 20kHz THD -92dB Dynamic Range 75dB Jitter (correlated) 260pS Digital Outputs Opt and Coax Dimension (mm) (H x W x D) 70 x 430 x 310 Weight (kg) 4.6 AP14839/2 1RadioFans.CN 收音机爱 好者资料库 640C SERVICE MANUAL TABLE OF CONTENTS Safety Precautions & Important Notes 3 Laser Safety Precautions 4 Exploded Assembly Diagram 5 Main Assembly BOM (Silver Unit) 6-8 Front Panel PCB Schematic 9 Front Panel PCB Layout (Top Side) 10 Front Panel PCB Layout (Bottom Side) 11 Front Panel PCB BOM (Silver Unit) 12/13 Servo PCB Schematic 14 Servo PCB Schematic (Power Supply) 15 Servo PCB Layout (Top Side) 16 Servo PCB Layout (Bottom Side) 17 Servo PCB BOM 18/19 DAC PCB Schematic 20 DAC PCB Layout (Top Side) 21 DAC PCB Layout (Bottom Side) 22 DAC PCB BOM 23 Mains Input PCB Schematic 24 Mains Input PCB Layout (Top Side) 25 Mains Input PCB Layout (Bottom Side) 26 Mains Input PCB BOM 27 IC Pin Layout Details 28-33 Silver / Black Differences BOM 34 2RadioFans.CN 收音机爱 好者资料库SAFETY PRECAUTIONS & IMPORTANT NOTES SAFETY PRECAUTIONS & IMPORTANT NOTES 1.Check that the rear of the product indicates the correct supply voltage for you area. 2. The lighting flash with the arrowhead within an equilateral triangle is intended to alert the user or service agent to the presence of dangerous voltages within the product enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. 3. The exclamation point within an equilateral triangle is intended to alert the user or service agent to the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the appliance. 4. This product complies with EEC Low Voltage (73/23/EEC) and Electromagnetic Compatibility (89/336/EEC) Directives when used and serviced in accordance with this manual. For continued compliance all components marked safety and EMC critical must only be replaced by Cambridge Audio approved parts. 5. Any unauthorised design alterations or additions will void the manufacturers warranty; furthermore the manufacturer cannot accept responsibility for personal injury or property damage resulting therefrom. 6. When servicing, care should be taken to observe the original routing and dressing of the leads and it should be confirmed that they have been returned to normal after re-assembly. Notes on chip component replacement Never reuse a component that has been removed from a PCB Notice that the minus side of a tantalum capacitor may be damaged by heat COPYRIGHT NOTICE. COPYRIGHT NOTICE. 2005 Audio Partnership PLC. All rights reserved. Cambridge Audio and Azur are registered trademarks of Audio Partnership PLC. This document may not be reproduced, distributed, transmitted, displayed, published, or broadcast without the express written prior permission of Audio Partnership PLC. Alteration or removal of any trademark, copyright, or other notice from this content is prohibited. Information provided in this document is provided solely for the use of official service agents in repairing and servicing Audio Partnership PLC products. LASER SAFETY PRECAUTIONS Caution: These labels may be attached to the unit on the rear and inside to inform that it contains a laser component. Use of controls or adjustments, or performance of procedures other than those specified within the service or instruction manual may result in hazardous radiation exposure. WARNING! WARNING! 1. Service should only be performed by qualified personnel. 2. This equipment has been designed and manufactured to meet international safety standards; it is the legal responsibility of the repairer to ensure that these safety standards are maintained. 3. Any repairs must be made in accordance with the relevant safety standards. 4. It is essential that safety and EMC critical components are replaced with Cambridge Audio approved parts only. CLASS 1 LASER PRODUCTNOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electrostatic breakdown because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic breakdown and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. NOTES ON LASER DIODE EMISSION CHECK The laser beam on this model is concerated so as to be focused on the disc reflective surface bythe objective lens in the optical pick-up block. Therefore, when checking the laser diode emission, observe from more than 30cm away from the objective lens. 426/11/048GTLDRAWING.AP16811/11640C EXPLODED ASSEMBLY1: ORIGINAL DRAWING 26/11/04.2418191221756151416931020137211112CDRAWING NOTES:-REVISIONS NOTES:-DATEEDITORREVTHIRD ANGLEPROJECTIONBAABCD123E-MAIL s i mon.fr eet haudi opar t ner s hi pFINISH:MATERIAL:REVISIONS & DATEE-MAIL ni ckaudi opar t ner s hi p1:5SCALE:E-MAIL gr ahameaudi opar t ner s hi pFAX: 0207 940 223 31DO NOT SCALE FROM DRAWINGDWG. NO.A0SIZETITLE:AUDIO PARTNERSHIP PLCUNLESS OTHERWISE SPECIFIED: OF 1SHEET TEL: 0207 940 2200LONDON SE1 4BBHANKEY PLACE3 GALLERY COURTAUDIO PARTNERSHIP PLCCOPYRIGHT 0.5-PROPRIETARY AND CONFIDENTIALANGULAR 0.1mm2 DECIMAL IE 75.75 OF AUDIO PARTNERSHIP IS PROHIBITED.FEFE1234567887654DIMENSIONS ARE IN MM sTOLERANCES:WHOLE NO.s IE 75 0.5mm1 DECIMAL IE 75.5 0.2mmTHE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OFAUDIO PARTNERSHIP PLC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION DDrawing ref AP part Internal refDescription1CA new side panel2CA new plastic insert rear3CA new plastic insert front4CA new back panel5PY5076550-010204-000-01 Azur 640C Top Panel Black5PY5086550-010204-000-02 Azur 640C Top Panel Silv er6PY5157002-608 010-001Screw M2. 6 x 8 M/C Torx Recessed 1/K Head Black6PY5167002-608 010-006Screw M2. 6 x 8 M/C Torx Recessed 1/K Head En-Plated (silv er)7PY58 66564-010001-000A01 Azur-640C. Front panel SILVER 7PY58 26564-010001-000-01 Azur-640C. Front panel BLACK 8PY58 78 564-001001-301Azur-640C Complete front panel assy (Silv er) REV A 8PY58 38 564-001002-301Azur-640C Complete front panel (BLACK) REV A9PY5633200-576690-100TRANSFORMER 115V/230V AC10V/2A 16*2/0. 5A ES-57-66910PY5416050-150010-000A01 PLASTIC FOOT GREY PAINT SILVER10PY5316050-150010-000PLASTIC FOOT BLACK (AP126522)11PY3409692-006002-101Mech an Assy (PU92TL-210) W/Sony KSM213CCM ReV A12PY7903009-213000-000Sony laser assy KS213CCM13PY7196050-150012-000-01 7MM TAC SWITCH BUTTON (BLACK)13PY7206050-150012-000A01 7MM TAC SWITCH BUTTON (SILVER)14PY7046600-170104-000CA NEW RANGE AMP 7MM TAC SWITCH CUSHION15PY5719464-001000-011Azur-540C & 640C MAIN SERVO BOARD ASSY 16PY58 89460-001300-58 1Azur-640C DAC BOARD ASSY REV A17PY58 99464-001000-071Azur-640C POWER PCB ASSY REV A18PY57398 05-064001-000Azur-340/540/640AC REMOTE CONTROL ASSY19PY5446600-170100-000FOOT PAD FOR Azur-640A20PY5686564-010006-000A01 Azur-640C. Silv er CD DOOR W/SILKSCREEN PMS COOL GREY 7C20PY5546564-010006-000-01 Azur-640C. Black CD DOOR W/SILKSCREEN PMS COOL GREY 7C21PY5523110-06458 0-100LCD DISPLAY ISO6458 P01V0 113*25. 7MM NEGATIVE (BLACK UNIT)21PY5623110-06458 0-000LCD DISPLAY ISO6458 P00V0 113*25. 7MM POSITIVE (SILVER UNIT)22PY5569464-001000-041Azur-540C & 640C CONTROL BOARD ASSY REV ANote: user manual is downloadable from our www. cambridge-audio. co. uk5AP13752/3AP Part No.DRAWING NODESCRIPTIONQTYCOMMENTSAP13504/1POLY ENDCAP PACKAGING2AP13505/1CARTON PACKAGING W/HANDLE1PRINTED TO ARTWORK AP13716/1AP13613/1CAMBRIDGE AUDIO AZUR WOVEN BAG FOR REMOTE CONTROL1PACK REMOTE CONTROL INSIDE, CAMBRIDGE AZUR REMOTE CONTROL COMPLETE. MODEL No RC-540AC/640AC1MOUNTED INTO POLY ENDCAP PACKING IN REBATE PROVIDEDAAA ALKALINE BATTERIES3FOR REMOTE. PLACE IN INSTRUCTION MANUAL POLYBAGPY566AP14004/1640C CD PLAYER OWNERS MANUAL1AP13945/1CARTON LABEL (MODEL NO.) UK SILVER1FOR BOXSERIAL NUMBER LABEL, BLANK (6.5X35.5mm)31 X REAR PANEL, 1 X BOX, 1 X SHIPPING CARTONISO 9002 LABEL1AFFIXED TO REAR PANEL ABOVE IEC SOCKETAP10087/2MADE UNDER LICENCE IN PRC STICKER1AFFIXED TO REAR PANEL BELOW IEC SOCKETPOLYBAG 173X260X4C mm1FOR INSTRUCTION MANUALOWNERS CERTIFICATE AND REMOTE BATTERIESAP13612/1CAMBRIDGE AUDIO AZUR 2 RIDGE WOVEN BAG1PACK AMP UNIT INSIDE1830mm AC IEC POWER CORD SET BS STANDARD FUSED 3 AMP1MUST BE BS APPROVEDBLUE TAPE SEAL FOR CAMBRIDGE CARTON1FRONT PANEL ASSEMBLYPY586AP12741/1CAMBRIDGE NEW RANGE CD FRONT PANEL (PUNCHED AND PRINTED) (SILVER)1SCREENED WITH ARTWORK AP13591/3 & AP13593/1AP12935/1CAMBRIDGE NEW RANGE IR LENS1GLUED IN PLACE ON THE FRONT PANELAP13322/1CAMBRIDGE NEW RANGE 105mm DISPLAY WINDOW1GLUED IN PLACE ON THE FRONT PANELAP13436/2CAMBRIDGE NEW RANGE CD SUB PANEL LEFT (POWER)1FASTENEND IN PLACE INBETWEEN THE LEDGES ON THE FRONT PANEL, ALIGN UP THE POWER BUTTON HOLESAP12931/1CAMBRIDGE NEW RANGE AMP LIGHTGUIDE, CUT TO SINGLE PIPE1FASTEN TO SUBPLATE LEFT (POWER)M3 X 6 POZI PAN STP SCREW1AFFIXES SINGLE LIGHTGUIDE TO SUBPLATEM3 X 6 C/S POZI MACHINE SCREW4FASTEN THE SUB PLATE LEFT TO THE FRONT PANELAP13585/1CAMBRIDGE NEW RANGE AMP 9mm TAC SWITCH CUSHION1POSITION ON THE CONTROL BOX BUTTON, DOWN THE MAIN SHAFT AFFIX USING ADHESIVE PROVIDED ON THE CUSHION.PY145AP11782/1OPUS CONTROL BOX BUTTON (SILVER)1POSITION IN PLACE ON THE FRONTPANELAP13437/2CAMBRIDGE NEW RANGE CD SUB PANEL RIGHT (FUNCTION)1FASTENEND IN PLACE INBETWEEN THE LEDGES ON THE FRONT PANEL, ALIGN UP THE FUNCTION BUTTON HOLESM3 X 6 C/S POZI MACHINE SCREW4FASTEN THE SUB PLATE RIGHT TO THE FRONT PANELAP12934/1CAMBRIDGE NEW RANGE AMP 7mm TAC SWITCH CUSHION5POSITION ON THE 7mm TACT SWITCH BUTTONS, DOWN THE MAIN SHAFT AFFIX USING ADHESIVE PROVIDED ON THE CUSHION.AP12925/1CAMBRIDGE NEW RANGE AMP 7mm TAC SWITCH BUTTON5POSITION IN PLACE ON THE FRONTPANELCambridge Azur 640CCD Player (Main Assembly BOM Silver Unit)Note, resistors, capacitors and other generic electronic components are not usually stocked by the manufacturer. Please obtain these locally.6AP Part No.DRAWING NODESCRIPTIONQTYCOMMENTSBOTTOM PANEL ASSEMBLYAP12735/5CAMBRIDGE NEW RANGE CD BOTTOM PANEL112.2mm BRASS THREADED STANDOFF1POSITION IN PLACE ON BOTTOM PANELM3 X 8 POZI PAN MACHINE SCREW1TO AFFIX BRASS THREADED STANDOFF TO BOTTOM PANELPY541AP12652/2CAMBRIDGE NEW RANGE FOOT MOULDING (SILVER)4POSITION IN PLACE ON BOTTOM PANELPY544AP12883/3CAMBRIDGE NEW RANGE FOOT PAD4AFFIX ON FOOT USING ADHESIVE SURFACEM3 X 6 PLASTITE POZI PAN4AFFIX FEET TO BOTTOM PANEL12.7mm PLASTIC PCB STANDOFF7PUSH SNAP FIT ON BOTTOM PANEL8 mm PLASTIC PCB STANDOFF1PUSH SNAP FIT ON BOTTOM PANELM4 X 12 POZI PAN MACHINE BOLT2FIX THROUGH EARTHING POINT HOLES ON BOTTOM PANELM4 NUT STANDARD2USED TO FIX ABOVE BOLTSM4 LOCK WASHER2FOR EARTH BOLTSM4 X 12 POZI PAN MACHINE BOLT2TO FIX THROUGH TRANSFORMER HOLES IN BOTTOM PANELM4 LOCK WASHER 2PLACE ON TRANSFORMER FIXING BOLTSM4 NUT STANDARD2USED TO FIX TRANSFORMER IN PLACEFW-2S PIN GOOD STICK ON CABLE CLIP3USED TO CLIP DAC POWER CABLE AP13894/ AND TRANSFORMER TO SERVO BOARD CABLEAP13571/1CAMBRIDGE AUDIO NEW RANGE CD TRANSFORMER PAD1POSITION IN PLACE ON BOTTOM PANEL WITH THE FIXING BOLTS THROUGH SUPPLIED HOLESPY563AP13157/3CAMBRIDGE AUDIO EI 115/230V 540C/640C TRANSFORMER1POSITION ON TRANSFORMER PAD WITH FIXING BOLTS THROUGH SUPPLIED HOLESAP13545/1CAMBRIDGE AUDIO NEW RANGE CD TRANSFORMER CAN WITH ADHESIVE PAD ADDED1SCREENED WITH ARTWORK AP13721/1 POSITION ON TOP OF TRANSFORMER AND PRESS TO STICK IN PLACECD Mechanism with Loader1POSITION IN THE CORRECT POSITION ON THE BOTTOM PANELPY057CD mechanism (Sony)1M3 X 6 POZI PAN MACHINE SCREW4TO AFFIX THE CD MECH TO THE BOTTOM PANELAP13895/1MAINS PCB INSULATING SHEET1TO BE POSITIONED OVER STANDOFFS UNDER POWER PCBAP13544/2CAMBRIDGE AUDIO NEW RANGE CD MECH TOP STICKER1SCREENED WITH ARTWORK AP13763/1THEN POSITION OVER LOCATING PIPS ON CD MECH TOP SURFACE AND PRESS TO STICKPY568AP13495/1CAMBRIDGE AUDIO NEW RANGE CD DRAW FRONT (SILVER)1SCREENED WITH ARTWORK AP13601/1 POSITON ON DRAW FRONT AND GLUE IN PLACEM3x8 POSIPAN MACHINE SCREW1TO FIX SERVO BOARD TO BRASS THREADED STAND OFFAP13617/116 WAY LASER CABLE, FLEXIBLE FLAT CABLE 250mm1CONNECTS SERVO PCB TO LASER BLOCK ON THE CD MECHNote, resistors, capacitors and other generic electronic components are not usually stocked by the manufacturer. Please obtain these locally.7AP Part No.DRAWING NODESCRIPTIONQTYCOMMENTSAP13618/15 WAY TRAY MOTOR CABLE FLAT WIRE STYLE 350mm1CONNECTS THE SERVO PCB TO THE CD MECH, RUNS UNDER THE FRONT OF THE MECH AND UNDER THE SERVO PCBAP13619/16 WAY SPINDLE MOTOR CABLE 200mm1CONNECTS THE SERVO PCB TO THE CD MECH, RUNS UNDER THE CD MECHAP10616/6SERVO PCB SHIELDING CAN 1SCREENED WITH ARTWORK AP13721/1 POSITION OVER SEVRO PCB AND SOLDER FIXAP10001/2CAMBRIDGE AUDIO SCREENING CAN1POSITION OVER DAC PCB AND SOLDER FIXAP13625/12 WAY MUTE CABLE, FLAT WIRE STYLE CABLE 300mm1CONNECTS DAC PCB TO THE SERVO PCBAP13626/13 WAY SHIELDED DIGITAL OUT CABLE 130mm1CONNECTS DAC PCB TO THE SERVO PCBAP13627/15 WAY SHIELDED DIGITAL OUT CABLE 120mmCONNECTS DAC PCB TO THE SERVO PCBAP13628/12 WAY SHIELDED MASTER CLOCK CABLE 160mm1CONNECTS DAC PCB TO THE SERVO PCBM2.6 X 6 POZI PAN MACHINE SCREW5TO AFFIX BOTTOM PANEL TO SIDE, FRONT AND REAR PANELSM2.6 X 10 POZI PAN PLASTITE4FIX CORNERS OF BOTTOM PANEL TO PLASTIC INSERTSSIDE PANEL ASSEMBLY2AP12725/1CAMBRIDGE AUDIO NEW RANGE PRESSED SIDE PANEL (2 RIDGE) (SILVER)2POSITION IN PLACE ON PLASTIC FRONT INSERTSAP12727/1CAMBRIDGE AUDIO NEW RANGE FRONT PLASTIC SUPPORT (2 RIDGE WITH CAPTIVE M2.6 NUTS)2POSITION AT FRONT WITHIN SIDE PANELSAP12728/1CAMBRIDGE AUDIO NEW RANGE REAR PLASTIC SUPPORT (2 RIDGE WITH CAPTIVE M2.6 NUTS)2POSITON AT REAR WITHIN SIDE PANELSM2.6 X 10 C/S POZI PLASTITE8TO AFFIX SIDE PANELS TO PLASTIC INSERTSD640C REAR PANEL ASSEMBLY1AP13435/2CAMBRIDGE AUDIO NEW RANGE CD REAR PANEL PRINTED 1SCREENED WITH ARTWORK AP13669/1, THEN POSITION ON REAR PLASTIC SUPPORTSM3 X 10 POZI PAN PLASTITE4TO AFFIX REAR PANEL TO REAR PLASTIC INSERTSM3 X 8 POZI PAN PLASTITE3TO FIX DAC PCB ELECTRONIC PARTS TO REAR PANELM3 X 10 POZI PAN MACHINE SCREW2FIXES THE IEC SOCKET MOUNTED ON THE POWER BOARD TO THE REAR PANELM3 NUT STANDARD2USED TO FIX ABOVE BOLTSM3 LOCK WASHER2USED TO FIX ABOVE BOLTSAP13340/1A600 LIDDING TAPE FOR FRONT AND REAR PANELS2FIX TO THE CORRECT SURFACES FOR LID AP13342/1A600 LIDDING TAPE FOR SIDE PANELS2FIX TO THE CORRECT SURFACES FOR LID PY574AP12733/2CAMBRIDGE AUDIO NEW RANGE TOP PANEL WITHOUT VENTS (SILVER)1POSITIONON TOP OF THE PRODUCTPY516M2.6 X 6 C/S TORX MACHINE SCREW (SILVER)8TO AFFIX TOP PANEL TO PLASTIC INSERTS, SIDE, REAR AND FRONT PANELNote, resistors, capacitors and other generic electronic components are not usually stocked by the manufacturer. Please obtain these locally.8Cambridge Audio Azur 640C CD PlayerAP12992/3 Front Panel PCB Sc