Pioneer-VSXAX5iS-avr-sm 维修电路原理图.pdf
ORDER NO.PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, JapanPIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, BelgiumPIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2003 VSX-AX5i-S RRV2801 AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-AX5i-S VSX-AX3-SVSX-AX3-K THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S). *:Alter the wiring of the power-supply block at the primary winding of Power transformer referring to the Line Voltage Selection described in Service Manual. ModelTypePower RequirementThe voltage can be converted by the following method. VSX-AX5i-SHYXJIAC220-230VAC240V, *VSX-AX3-SHYXJIAC220-230VAC240V, *VSX-AX3-KHYXJIAC220-230VAC240V, *For details, refer to Important symbols for good services. T-ZZE JULY 2003 printed in JapanRadioFans.CN 收音机爱 好者资料库 VSX-AX5i-S212341234CDFABE SAFTY INFORMATIONThis service manual is intended for qualified service technicians; it is not meant for the casualdo-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have beentrained to properly and safely repair complex products such as those covered by this manual.Improperly performed repairs can adversely affect the safety and reliability of the product and mayvoid the warranty. If you are not qualified to perform the repair of this product properly and safely, youshould not risk trying to do so and refer the repair to a qualified service technician.WARNINGThis product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California tocause cancer, birth defects or other reproductive harm. Health & Safety Code Section 25249.6 Proposition 65NOTICE(FOR CANADIAN MODEL ONLY)Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacementparts must be of identical designation.REMARQUE(POUR MODLE CANADIEN SEULEMENT)Les symboles de fusible (fusible de type rapide) et/ou (fusible de type lent) sur CCI indiquent queles pices de remplacement doivent avoir la mme dsignation.ANY MEASUREMENTS NOT WITHIN THELIMITS OUTLINED ABOVE ARE INDICATIVEOF A POTENTIAL SHOCK HAZARD ANDMUST BE CORRECTED BEFORE RETURN-ING THE APPLIANCE TO THE CUSTOMER.2. PRODUCT SAFETY NOTICEMany electrical and mechanical parts in the appliancehave special safety related characteristics. These areoften not evident from visual inspection nor theprotection afforded by them necessarily can be obtainedby using replacement components rated for voltage,wattage, etc. Replacement parts which have thesespecial safety characteristics are identified in thisService Manual.Electrical components having such features areidentified by marking with a on the schematics andon the parts list in this Service Manual.The use of a substitute replacement component whichdoes not have the same safety characteristics as thePIONEER recommended replacement one, shown in theparts list in this Service Manual, may create shock, fire,or other hazards.Product Safety is continuously under review and newinstructions are issued from time to time. For the latestinformation, always consult the current PIONEERService Manual. A subscription to, or additional copiesof, PIONEER Service Manual may be obtained at anominal charge from PIONEER.(FOR USA MODEL ONLY)1. SAFETY PRECAUTIONSThe following check should be performed for thecontinued protection of the customer and servicetechnician.LEAKAGE CURRENT CHECKMeasure leakage current to a known earth ground(water pipe, conduit, etc.) by connecting a leakagecurrent tester such as Simpson Model 229-2 orequivalent between the earth ground and all exposedmetal parts of the appliance (input/output terminals,screwheads, metal overlays, control shaft, etc.). Plugthe AC line cord of the appliance directly into a 120VAC 60 Hz outlet and turn the AC power switch on. Anycurrent measured must not exceed 0.5 mA.DeviceundertestLeakagecurrenttesterEarthgroundReading shouldnot be above0.5 mAAlso test withplug reversed(Using AC adapterplug as required)Test allexposed metalsurfacesAC Leakage TestRadioFans.CN 收音机爱 好者资料库 VSX-AX5i-S356785678CDFABE CONTENTS SAFTY INFORMATION.21. SPECIFICATIONS.52. EXPLODED VIEWS AND PARTS LIST.82.1 PACKING.82.2 EXTERIOR SECTION .102.3 REAR PANEL SECTION .122.4 HEAT SINK SECTION.142.5 FRONT PANEL SECTION.163. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .183.1 BLOCK DIAGRAM.183.1.1 AUDIO BLOCK DIAGRAM.183.1.2 DSP BLOCK DIAGRAM .203.1.3 1394 BLOCK DIAGRAM.223.1.4 POWER AMP BLOCK DIAGRAM.233.1.5 VIDEO BLOCK DIAGRAM.243.2 OVERALL WIRING DIAGRAM .263.3 7.1 CH I/O, V-AUDIO, FRONT IN and OPTICAL IN ASSYS.283.4 INPUT CONNECT ASSY.303.5 COAXIAL IN ASSY.323.6 COMPONENT ASSY.343.7 VIDEO ASSY.363.8 MAIN CONTROL ASSY (1/3).383.9 MAIN CONTROL ASSY (2/3).403.10 MAIN CONTROL ASSY (3/3).423.11 MIC & F.OPT IN, MIC AMP and DSP CONNECTION ASSYS.443.12 POWER AMP IN, FAN CONNECTION and FAN DRIVE ASSYS.463.13 DSP ASSY (1/2) .483.14 DSP ASSY (2/2) .503.15 1394 ASSY (1/2) (VSX-AX5i-S ONLY) .523.16 1394 ASSY (2/2) (VSX-AX5i-S ONLY) .543.17 DISPLAY ASSY .563.18 VOLUME, MECHA SW, MULTI JOG and HEADPHONE ASSYS.58 Important symbols for good services In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely.When you find the procedures bearing any of the symbols, be sure to fulfill them:2. AdjustmentsTo keep the original performances of the product, optimum adjustments or specification confirmation is indispensable. In accordance with the procedures or instructions described in this manual, adjustments should be performed.3. CleaningFor optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,proper cleaning should be performed to restore their performances. 5. Lubricants, glues, and replacement partsAppropriately applying grease or glue can maintain the product performances. But improper lubrication or applying glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply theprescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed ones should be used.4. Shipping mode and shipping screwsTo protect the product from damages or failures that may be caused during transit, the shipping mode should be set orthe shipping screws should be installed before shipping out in accordance with this manual, if necessary.1. Product safetyYou should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual. VSX-AX5i-S412341234CDFABE 3.19 POWER AMP-L ASSY.603.20 POWER AMP-R and POWER AMP-C ASSYS.623.21 REGULATOR ASSY.643.22 SP/PS, DIODE, TRANS 2-1 and VH TR ASSYS.663.23 TRANS 2-2, TRANS 1 and PRIMARY ASSYS.683.24 FM/AM TUNER MODULE.704. PCB CONNECTION DIAGRAM .724.1 7.1CH I/O ASSY .734.2 V-AUDIO IN ASSY.754.3 FRONT IN and OPTICAL IN ASSYS.764.4 COAXIAL IN ASSY .774.5 INPUT CONNECT ASSY.784.6 COMPONENT ASSY.804.7 VIDEO ASSY .814.8 MAIN CONTROL ASSY.824.9 MIC & F. OPT IN, MIC AMP and DSP CONNECTION ASSYS .864.10 POWER AMP IN ASSY.884.11 FAN CONNECTION ASSY .904.12 FAN DRIVE ASSY.914.13 DSP ASSY.924.14 DISPLAY ASSY.944.15 VOLUME, MECHA SW, MULTI JOG and HEADPHONE ASSYS.984.16 POWER AMP L and POWER AMP C ASSYS.1004.17 POWER AMP R ASSY.1084.18 REGULATOR ASSY.1164.19 SP/PS ASSY.1244.20 DIODE, TRANS 2-1 and VH TR ASSYS.1264.21 TRANS 2-2, TRANS 1 and PRIMARY ASSYS.1284.22 1394 ASSY (VSX-AX5i-S ONLY).1324.23 FM/AM TUNER MODULE.1335. PCB PARTS LIST .1346. ADJUSTMENT .1477. GENERAL INFORMATION.1487.1 DIAGNOSIS.1487.1.1 PROTECTION CIRCUIT CONTROL SPECIFICATION .1487.1.2 DIAGNOSTICS OF AMPLIFIER SECTION .1507.1.3 TROUBLE SHOOTING .1517.1.4 DISASSEMBLY.1567.2 PARTS.1597.2.1 IC .1597.2.2 DISPLAY .1737.3 CLEANING.1757.4 REMOTE CONTROL UNIT.1768. PANEL FACILITIES .177 VSX-AX5i-S556785678CDFABE 1. SPECIFICATIONS Lucasfilm and THX are trademarks or registered trademarks of Lucasfilm, Ltd. and TM. Surround EX is a jointly developed technology of THX and Dolby Laboratories, and is a trademark of Dolby Laboratories. All rights reserved. Used under authorization. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, “Surround EX” and double-D symbol are trademarks of Dolby Laboratories. DTS, DTS-ES Extended Surround and Neo:6 are trademarks of Digital Theater Systems, Inc.Video Section (Composite)Input (Sensitivity/Impedance)LINE.1 Vp-p/75 Output (Level/Impedance)LINE.1 Vp-p/75 Frequency ResponseLINE.5 Hz to 10 MHz +03 dBSignal-to-Noise Ratio.65 dBFM Tuner SectionFrequency Range .87.5 MHz to 108 MHzUsable Sensitivity. Mono: 15.2 dBf, IHF (1.6 V/75 )50 dB Quieting Sensitivity.Mono: 20.2 dBfStereo: 41.2 dBfSensitivity (DIN).Mono: 1.1 V (S/N 26 dB)Stereo: 50 V (S/N 46 dB)Signal-to-Noise Ratio.Mono: 76 dB (at 85 dBf)Stereo: 72 dB (at 85 dBf)Signal-to-Noise Ratio (DIN).Mono: 62 dBStereo: 58 dBDistortion.Stereo: 0.6 % (1 kHz)Alternate Channel Selectivity.70 dB (400 kHz)Stereo Separation.40 dB (1 kHz)Frequency Response.30 Hz to 15 kHz ( 1 dB)Antenna Input .75 unbalancedAM Tuner SectionFrequency Range .531 kHz to 1,602 kHzSensitivity (IHF, Loop antenna).350 V/mSelectivity.30 dBSignal-to-Noise Ratio.50 dBAntenna .Loop antennaMiscellaneousPower Requirements . AC 220 230 V, 50/60 HzPower Consumption. 600 WPower Consumption in Standby mode .0.8 WAC Outlet SWITCHED.100 W (0.8 A) MAXDimensions .420 (W) 188 (H) 464 (D) mmWeight (without package).19.8 kgFurnished PartsFM wire Antenna.1AM loop Antenna.1“AA” IEC LR6 batteries.4Remote Control Unit.1Microphone for Auto Surround Sound Setup.1Microphone Stand for Auto Surround Sound Setup.1AC Power Cord.1Operating Instructions .1NOTE:Specifications and the design are subject to possible modi-fications without notice, due to improvements.Continuous Power Output (DIN)Front .100 W + 100 W (DIN 1 kHz, THD 1%, 8 )Center.100 W (DIN 1 kHz, THD 1%, 8 )Surround.100 W + 100 W (DIN 1 kHz, THD 1%, 8 )Surround Back.100 W + 100 W (DIN 1 kHz, THD 1%, 8 )Rated Power Output.100 W + 100 W(20 Hz 20 kHz, 0.09 %, 8 )Audio SectionInput (Sensitivity/Impedance)PHONO MM .4.7 mV/47 kLINE.335 mV/47 kFrequency ResponsePHONO MM .20 Hz to 20,000 Hz 0.3 dBLINE.5 Hz to 100,000 Hz +03 dBOutput (Level/Impedance)LINE.335 mV/2.2 kTone ControlBASS. 6 dB (100 Hz)TREBLE. 6 dB (10 kHz)LOUDNESS. +4/+2 dB (100Hz/10 kHz)(at volume position -40dB)Signal-to-Noise Ratio (IHF, short circuited, A network)LINE.101 dBSignal-to-Noise RatioDIN (Continuous rated power output/50 mW)LINE. 92/65 dBVideo Section (S jack)Input (Sensitivity/Impedance) .1 Vp-p/75 Output (Level/Impedance).1 Vp-p/75 Frequency Response.5 Hz to 10 MHz +03 dBSignal-to-Noise Ratio .65 dBVideo Section (Component)Input (Sensitivity) .1 Vp-p/75 Output (Level/Impedance).1 Vp-p/75 Frequency Response.5 Hz to 40 MHz +03 dBSignal-to-Noise Ratio .65 dB7 VSX-AX5i-S VSX-AX5i-S612341234CDFABE Lucasfilm and THX are trademarks or registered trademarks of Lucasfilm, Ltd. and TM. Surround EX is a jointly developed technology of THX and Dolby Laboratories, and is a trademark of Dolby Laboratories. All rights reserved. Used under authorization. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, “Surround EX” and double-D symbol are trademarks of Dolby Laboratories. DTS, DTS-ES Extended Surround and Neo:6 are trademarks of Digital Theater Systems, Inc.7 VSX-AX3-S, -KContinuous Power Output (DIN)Front.100 W +100 W (DIN 1 kHz, THD 1%, 8 )Center.100 W (DIN 1 kHz, THD 1%, 8 )Surround .100 W +100 W (DIN 1 kHz, THD 1%, 8 )Surround Back.100 W +100 W (DIN 1 kHz, THD 1%, 8 )Rated Power Output.100 W + 100 W(20 Hz 20 kHz, 0.09 %, 8 )Audio SectionInput (Sensitivity/Impedance)LINE .335 mV/47 kFrequency ResponseLINE .5 Hz to 100,000 Hz +03 dBOutput (Level/Impedance)LINE .335 mV/2.2 kTone ControlBASS . 6 dB (100 Hz)TREBLE. 6 dB (10 kHz)LOUDNESS . +4/+2 dB (100Hz/10 kHz)(at volume position 40dB)Signal-to-Noise Ratio (IHF, short circuited, A network)LINE .101 dBSignal-to-Noise RatioDIN (Continuous rated power output/50 mW)LINE . 92/65 dBVideo Section (S jack)Input (Sensitivity/Impedance).1 Vp-p/75 Output (Level/Impedance) .1 Vp-p/75 Frequency Response.5 Hz to 10 MHz +03 dBSignal-to-Noise Ratio.65 dBVideo Section (Composite)Input (Sensitivity/Impedance)LINE .1 Vp-p/75 Output (Level/Impedance)LINE .1 Vp-p/75 Frequency ResponseLINE .5 Hz to 10 MHz +03 dBSignal-to-Noise Ratio.65 dBFM Tuner SectionFrequency Range.87.5 MHz to 108 MHzUsable Sensitivity. Mono: 15.2 dBf, IHF (1.6 V/75 )50 dB Quieting Sensitivity.Mono: 20.2 dBfStereo: 41.2 dBfSensitivity (DIN).Mono: 1.1 V (S/N 26 dB)Stereo: 50 V (S/N 46 dB)Signal-to-Noise Ratio .Mono: 76 dB (at 85 dBf)Stereo: 72 dB (at 85 dBf)Signal-to-Noise Ratio (DIN).Mono: 62 dBStereo: 58 dBDistortion .Stereo: 0.6 % (1 kHz)Alternate Channel Selectivity.70 dB (400 kHz)Stereo Separation.40 dB (1 kHz)Frequency Response.30 Hz to 15 kHz ( 1 dB)Antenna Input.75 unbalancedAM Tuner SectionFrequency Range.531 kHz to 1,602 kHzSensitivity (IHF, Loop antenna).350 V/mSelectivity.30 dBSignal-to-Noise Ratio .50 dBAntenna.Loop antennaMiscellaneousPower Requirements. AC 220 230 V, 50/60 HzPower Consumption.600 WPower Consumption in Standby mode.0.8 WAC Outlet SWITCHED .100 W (0.8 A) MAXDimensions.420 (W) 188 (H) 464 (D) mmWeight (without package).18.3 kgFurnished PartsFM wire Antenna.1AM loop Antenna .1“AA” IEC LR6 batteries.2Remote Control Unit .1Microphone for Auto Surround Sound Setup.1Microphone Stand for Auto Surround Sound Setup.1AC Power Cord .1Operating Instructions.1NOTE:Specifications and the design are subject to possible modifications without notice, due to improvements. VSX-AX5i-S756785678CDFABE VSX-AX5i-S812341234CDFABE 2. EXPLODED VIEWS AND PARTS LIST 2.1 PACKINGParts marked by NSP are generally unavailable because they are not in our Master Spare Parts List.The mark found on some component parts indicates the importance of the safety factor of the part.Therefore, when replacing, be sure to use parts of identical designation.Screws adjacent to mark on product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual.(In the case of no amount instructions, apply as you think it appropriate.)NOTES:867, 17-21Operating Instructions516822VSX-AX5i-S Only31241211141513109AccessoriesAM Loop Antenna(ATB7009)Remote Control Unit(VSX-AX5i-S : AXD7364)Remote Control Unit(VSX-AX3-S, -K : AXD7366)Microphone for AutoSurround Sound Setup(APM7004)Microphone Stand for AutoSurround Sound Setup(AEB7269)FM Wire Antenna(ADH7030)AC Power Cord(ADG7062)Dry Cell Battery(LR6, AA)VSX-AX5i-S Only VSX-AX5i-S956785678CDFABE PACKING parts List(2) CONTRAST TABLE VSX-AX5i-S/HYXJI, VSX-AX3-S/HYXJI and VSX-AX3-K/HYXJI are constructed the same except for the following: Mark No.DescriptionPar