JVC-TSC01Fang-fan-sm 维修电路原理图.pdf

SERVICE MANUALTS-C01FANGFAN UNITBASIC CHASSISCHNo. 52040May 2002COPYRIGHT 2002 VICTOR COMPANY OF JAPAN, LTD.TS-C01FANGTotal Mass : 1.1 k10715414638467.552.5160174MODEL No. IF-C01FANGFAN UNIT BFAN UNIT A(Unit : mm)TO FAN UNITCONTENTSaINSTRUCTIONS.2aPARTS LIST .3RadioFans.CN 收音机爱 好者资料库2No. 52040TS-C01FANGINSTRUCTIONSTS-C01 FANGInstructions for AssemblyWARNINGOnly attach to the JVC specified PDP Monitor.Attachment to other objects could result in fire or damage.Only use the screws provided for assembly of this unit.Failure to do so could cause the Monitor to collapse or fall, resulting in injury or damage.Only use the screws provided.Failure to do so could cause the screws to interfere with the circuits, resulting in electric shock or damage to the monitor.Only use the wire clamp provided to keep the electric wires in place.Failure to do so could result in fire or damage when attaching to a wall unit.Plug in the DC plug provided into its corresponding DC jack.Failure to do so could result in fire or damage due to inappropriate operation.Do not cover the ventilation areas of the Fan Unit and PDP Monitor.Failure to do so could result in fire and damage due to insufficient ventilation.Clean the ventilation areas of both the Fan Unit and PDP Monitor.Operation when the unit is covered in dust could result in fire or damage.Fan UnitParts List?ATTENTION During assembly, be careful not to touch metal edges.q Fan Unit A x 1w Fan Unit B x 1DC pluge Screw x 8r Wire Clamp X 10Non output terminalDC plug(Black)Length: 12mmOutput terminalDC jackS tight screwAssembly, Set Up Precautions 2002 VICTOR COMPANY OF JAPAN, LIMITEDVICTOR COMPANY OF JAPAN, LIMITED For more details, consult your local dealer.Printed in JapanLC21141-001AHow to assemble (Install the Fan Units before attaching in the wall or ceiling units.)1. Using four black screws provided e, affix Fan Unit A q to the rear right side of the PDP Monitor, as illustrated below.2. Using four black screws provided e, affix Fan Unit B w to the rear left side of the PDP Monitor, as illustrated below.3. Plug the DC plug for Fan Unit A q into the OPTION terminal for the PDP Monitor.4. Plug the DC plug for Fan Unit B w into the DC jack for Fan Unit A, labeled “TO FAN UNIT”.5. Peel off the sticker attached to the wire clamp r, and attach to the PDP Monitor to fix the wires in place, attach tothe spots illustrated below.6. Turn the PDP Monitor on and confirm that the fans are operating.PDP MonitorOPTION terminalPDP MonitorFan Unit A qFan Unit B w ATTENTIONWhen using in the upright position (illustrated above), ensure FanUnit A, located on the rear right of the PDP Monitor, is facing upward.Attach using the blackscrews provided eUpright position. ATTENTIONWhen attaching on to a wall or ceiling unit, be careful that the wires do not get tangled and that the DC plug does not come loose.Attach using the blackscrews provided eRadioFans.CN 收音机爱 好者资料库TS-C01FANGNo. 520403? PARTS LIST!Ref.No.Part No.Part NameDescriptionLocalPARTS LISTFAN UNIT AFAN UNIT BDC PLUG1. OUTER2. CENTER +FAN FAN +DC OUT DC OUT +DC IN DC IN +DC JACK (PIN)REDBLACKDC JACK (OUTER)FAN FAN +DC IN DC PLUG1. OUTER2. CENTER +DC IN +REDBLACK81(7TO FAN UNIT92MODEL No. IF-C01FANG3)%4*5 &6$!01YAC3608-001FAN CASEFor FAN UNIT A2YAC3608-002FAN CASEFor FAN UNIT B3YAC3616-001FAN BASE(X 2)4YAC4570-001FAN COVER(X 2)5YAC4574-001DC JACK BKT6YDD4974-002FAN PWB ASSY(X 2)7YWA1221-00ADC JACK8YAB4571-001DC PLUG CORDFor FAN UNIT A9YAB4571-002DC PLUG CORDFor FAN UNIT B10YAM4572-001STUD(X 8)11ASB-320STUD(X 4)12KF-21CORD BUSH(X 2)14QYSDST3005MSCREW(X 8)15QYSPSPD3030ZSCREW(X 8)16QYSBSB4012MSCREW(X 8)17QRG039J-560OM R(X 2) 56 3W J18QAR0238-002FAN(X 2)19YAA4537-001LABEL20LC41402-002ACAUTION LABEL(X 2)LC21141-001INST BOOKKAJ3613-001PACKING CASELC32507-002ACARTON LABELPrinted in JapanVP0205SWTS-C01FANGVICTOR COMPANY OF JAPAN, LIMITEDHOME AV NETWORK BUSINESS UNIT 12, 3-chome, Moriya-cho, kanagawa-ku, Yokohama, kanagawa-prefecture, 221-8528, Japan