Yamaha-NXP302-hts-sm 维修电路原理图.pdf
SERVICE MANUAL1 0 0 9 6 5SERVICE MANUALP.O.Box 1, Hamamatsu, Japan 2005 All rights reserved.This manual is copyrighted by YAMAHA and may not be copied orredistributed either in print or electronically without permission.SERVICE MANUALDVD HOME THEATER SOUND SYSTEM DVX-S301/DVX-S302DVR-S300/NX-P301/NX-P302IMPORTANT NOTICEThis manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are alreadyknown and understood by the users, and have therefore not been restated.WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personalinjury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,we advise all YAMAHA product owners that any service required should be performed by an authorizedYAMAHA Retailer or the appointed service representative.IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification orrecognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, andservice departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitableand specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, pleasecontact the distributors Service Division.WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may haveaccumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.I CONTENTSTO SERVICE PERSONNEL . 23PREVENTION OF ELECTROSTATIC DISCHARGE. 4LOCALE MANAGEMENT INFORMATION . 4SYSTEM COMPOSITION / 構成 . 5FRONT PANELS. 67REMOTE CONTROL. 8REAR PANELS . 812SPECIFICATIONS / 参考仕様 . 1315INTERNAL VIEW . 16REPAIR NOTES / 修理上留意点 . 17DVR-S300 TRADE MODE /DVR-S300 . 18DVR-S300 DISASSEMBLY PROCEDURES /分解手順. 1921NX-SW301 DISASSEMBLY PROCEDURES /分解手順. 2223DVR-S300 BLOCK DIAGRAM . 25NX-SW301 BLOCK DIAGRAM. 2627DVR-S300 WIRING DIAGRAM. 28NX-SW301 WIRING DIAGRAM . 29DVR-S300 PRINTED CIRCUIT BOARD . 3037NX-SW301 PRINTED CIRCUIT BOARD. 3841DVR-S300 SCHEMATIC DIAGRAM. 4255NX-SW301 SCHEMATIC DIAGRAM. 5660NX-SW301 PARTS LIST. 6163DVR-S300 EXPLODED VIEW . 6465NX-P301 EXPLODED VIEW . 6667NX-P302 EXPLODED VIEW . 68DVR-S300NX-P301/NX-P302 05.08RadioFans.CN 收音机爱 好者资料库DVR-S300/NX-P301/NX-P3022DVR-S300NX-P301/NX-P302WALLOUTLETEQUIPMENTUNDER TESTAC LEAKAGETESTER OREQUIVALENTINSULATINGTABLEI TO SERVICE PERSONNEL1. Critical Components InformationComponents having special characteristics are marked Zand must be replaced with parts having specifications equal tothose originally installed.2. Leakage Current Measurement (For 120V Models Only)When service has been completed, it is imperative to verifythat all exposed conductive surfaces are properly insulatedfrom supply circuits.GMeter impedance should be equivalent to 1500 ohms shuntedby 0.15F.GLeakage current must not exceed 0.5mA.GBe sure to test for leakage with the AC plug in both polarities.WARNING: Laser SafetyThis product contains a laser beam component. Thiscomponent may emit invisible, as well as visible radiation,which may cause eye damage. To protect your eyesand skin from laser radiation, the following precautionsmust be used during servicing of the unit.1) When testing and/or repairing any component withinthe product, keep your eyes and skin more than 30 cmaway from the laser pick-up unit at all times. Do notstare at the laser beam at any time.2) Do not attempt to readjust, disassemble or repair thelaser pick-up, unless noted elsewhere in this manual.3) CAUTION : Use of controls, adjustments or perfor-mance of procedures other than those specified hereinmay result in hazardous radiation exposure.WARNING: CHEMICAL CONTENT NOTICE!The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic(where applicable) components may also contain traces of chemicals found by the California Health and WelfareAgency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm.DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANYREASON WHATSOEVER!Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes orexpose eyes to solder/flux vapor!If you come in contact with solder or components located inside the enclosure of this product, wash your handsbefore handling food.Laser Emitting conditions:1) When the Top Cover is removed, and the STANDBY/ON SW is turned to the ON position, the lasercomponent will emit a beam for several seconds todetect if a disc is present. During this time (5-10 sec.)the laser may radiate through the lens of the laser pick-up unit. Do not attempt any servicing during this period!If no disc is detected, the laser will stop emitting thebeam. When a disc is loaded, you will not be exposedto any laser emissions.2) The laser power level can be adjusted with the VR onthe pick-up PWB, however, this level has been set bythe factory prior to shipping from the factory. Do notadjust this laser level control unless instruction isprovided elsewhere in this manual. Adjustment of thiscontrol can increase the laser emission level from thedevice.警告：安全対策本機光線放射部品搭載。部品放射光線目損傷起。光線目及肌保護、本機修理作業中下記注意厳守。1） 時修理時、目及肌光30c以上離。場合光線見。2） 光再調整及分解。3） 上指定以外制御、調整、手順光線照射結果招恐。放射条件1） 取外STANDBY/ONON、検知510秒間、光光線放射。間、修理。検知、光線放射停止。場合、遮光線修理担当者届。2） 光基板上VR調整可能、工場出荷前調整済、VR廻。VR廻装置光線放射上恐。THE DVD AUDIO/VIDEO PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIEDSERVICE PERSONNEL.RadioFans.CN 收音机爱 好者资料库DVR-S300/NX-P301/NX-P3023DVR-S300NX-P301/NX-P302INVISIBLE LASER RADIATION WHEN OPENDO NOT STARE INTO BEAMCAUTION:INVISIBLE LASER RADIATION WHEN OPENAVOID DIRECT EXPOSURE TO THE BEAMDANGER:Laser Diode PropertiesType:Semiconductor laser GaAlAsWave length:650 nm (DVD)784 nm (VCD/CD)Output Power:7 mW (DVD/VCD/CD)Beam divergence60 degreeWARNINGThe use of optical instruments with this product will increase eye hazard.Repair handling should take place as much as possible with a disc loaded inside the player.CAUTIONVISIBLE AND INVISIBLE LASER RADIATION WHENOPEN. AVOID EXPOSURE TO BEAM.ADVARSELSYNLIG OG USYNLIG LASERSTRLING VED BNING.UNDG UDSTTELSE FOR STRLING.ADVARSELSYNLIG OG USYNLIG LASERSTRLING NR DEKSELPNES. UNNG EKSPONERING FOR STRLEN.VARNINGSYNLIG OCH OSYNLIG LASERSTRLNING NRDENNA DEL R PPNAD. BETRAKTA EJ STRLEN.VARO!AVATTAESSA OLET ALTTIINA NKYVLLE JANKYMTTMLLE LASER S TEILYLLE. L KATSOSTEESEEN.VORSICHTSICHTBARE UND UNSICHTBARE LASERSTRAHLUNGWENN ABDECKUNG GEFFNET. NICHT DEM STRAHLAUSSETSEN.DANGERVISIBLE AND INVISIBLE LASER RADIATION WHENOPEN. AVOID DIRECT EXPOSURE TO BEAM.ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CASDOUVERTURE. EXPOSITION DANGEREUSE AUFAISCEAUWarning for power supplyThe primary side of the power supply carries live mains voltage when the player is connected to the mains even whenthe player is switched off !This primary area is not shielded so it is possible to touch copper tracks and/or components when servicing the player.Service personnel have to take precautions to prevent touching this area or components in this area.Note:The screws on the DVD mechanism may never be touched, removed or re-adjusted.Handle the DVD mechanism with care when the unit has to be exchanged!The DVD mechanism is very sensitive for dropping or giving shocks.VARO!: AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NKYMTTMLLE LASER-STEILYLLE. L KATSO STEESEEN.VARNING! : OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD.BETRAKTA EJ STRLEN.DVR-S300/NX-P301/NX-P3024DVR-S300NX-P301/NX-P302I PREVENTION OF ELECTROSTATIC DISCHARGEI LOCALE MANAGEMENT INFORMATIONLocale Management Information : This DVD player is designed and manufactured to respond to the LocaleManagement Information that is recorded on a DVD disc. If the Locale number described on the DVD disc does notcorrespond to the Locale number of this DVD player, this DVD player cannot play this disc.This product incorporates copyrightprotection technology that is protected bymethod claims of certain U.S. patents andother intellectual property rights owned byMacrovision Corporation and other rightsowners. Use of this copyright protectiontechnology must be authorized byMacrovision Corporation, and is intendedfor home and other limited viewing usesonly unless otherwise authorized byMacrovision Corporation. Reverseengineering or disassembly is prohibited.qwrwttrwyetThe laser diode in the traverse unit (optical pickup) may be damaged due to static electricity from clothes or the humanbody. Use caution to prevent electrostatic damage when servicing or handling the laser diode.1. Grounding for electrostatic damage prevention1. Worktable groundingPut a grounded conductive material (sheet) or iron sheet on the area where the optical pickup is placed.2. Human body groundingUse an anti-static wrist strap to discharge the static electricity from your body.2. Handling of the optical pickup1. To prevent damage to the optical pickup replacement parts during transportation and before installation, both endsof the laser diode are short-circuited. After installing the new part, remove the short circuit according to the correctprocedure in this service manual.2. Do not use a tester to check the laser diode in the optical pickup. The power supply in the tester will damage thelaser diode.3. Handling Precautions for the Traverse Unit (Optical Pickup)1. Handle the traverse unit (optical pickup) gently, as it is an extremely high-precision assembly.2. The flexible cable lines may break if an excessive force is applied to it. Use caution when handling the cable.3. The semi-fixed resistor for laser power adjustment should not be adjusted. Do not turn the resistor.1MConductive material(sheet) or steel sheetAnti-static wrist strapDVR-S300/NX-P301/NX-P3025DVR-S300NX-P301/NX-P302I SYSTEM COMPOSITION / 構成The DVX-S301 consists of the DVR-S300 and the NX-P301.The DVX-S302 consists of the DVR-S300 and the NX-P302.NX-SW301NX-SW301NX-S301NX-S302NX-C301NX-C302DVR-S300DVR-S300DVX-S301 (C, K, A, B, G, L, V, J models)DVX-S302 (C, K, A, B, G, L, V models)NX-P301NX-P302x 4x 1x 1x 4DVR-S300/NX-P301/NX-P3026DVR-S300NX-P301/NX-P302I FRONT PANELSDVR-S300(C, K, A, B, G, L, V models)(J model)NX-SW301DVR-S300/NX-P301/NX-P3027DVR-S300NX-P301/NX-P302NX-S301NX-C301NX-S302NX-C302DVR-S300/NX-P301/NX-P3028DVR-S300NX-P301/NX-P302I REAR PANELSDVR-S300 (C model)DVR-S300 (K model)I REMOTE CONTROLC, K, A, B, G, L, V modelsJ modelDVR-S300/NX-P301/NX-P3029DVR-S300NX-P301/NX-P302DVR-S300 (A model)DVR-S300 (B, G models)DVR-S300 (L model)DVR-S300 (V model)DVR-S300 (J model)DVR-S300/NX-P301/NX-P30210DVR-S300NX-P301/NX-P302NX-SW301 (C model)NX-SW301 (K model)NX-SW301 (A model)NX-SW301 (B, G models)DVR-S300/NX-P301/NX-P30211DVR-S300NX-P301/NX-P302NX-SW301 (J model)NX-SW301 (L model)NX-SW301 (V model)DVR-S300/NX-P301/NX-P30212DVR-S300NX-P301/NX-P302NX-S301NX-C301NX-S302NX-C302DVR-S300/NX-P301/NX-P30213DVR-S300NX-P301/NX-P302TUNER SECTIONFM Tuning Range- C, K, A, B, G, L, V models87.50 to 108.00 MHz- J model76.0 to 90.0 MHzAM Tuning Range- C model530 to 1700 kHz- K, A, B, G models531 to 1602 kHz- L, V models531 to 1602 kHz/530 to 1700 kHz- J model531 to 1602 kHzDISC SECTIONLaser TypeSemiconductorDisc Diametre12cm / 8cmVideo DecodingMPEG-1 / MPEG-2 /DivX 3.11, 4.x & 5.xVideo DAC12 bits/108 MHzSignal SystemPAL / NTSCVideo Format4:3 / 16:9Composite Video Output1.0 Vp-p, 75 ohmsS-video OutputY - 1.0 Vp-p, 75 ohmsC - 0.3 Vp-p, 75 ohmsRGB (SCART) output0.7 Vp-p, 75 ohms (B, G models)Component Video OutputY - 1.0 Vp-p, 75 ohmsPB/CB PR/CR 0.7 Vp-p, 75 ohmsAudio DAC24 bits / 192 kHzFrequency Response4 Hz to 20 kHz (44.1 kHz)4 Hz to 22 kHz (48 kHz)4 Hz to 44 kHz (96 kHz)Audio S/N105 dBDistortion0.0035 %Dynamic Range95 dBAUDIO FORMATDigitalDolby Digital/DTS/MPEG Compressed DigitalPCM16, 20, 24 bitsfs 44.1, 48, 88.2, 96, 176.4, 192 kHzMP3 (ISO 9660)24, 32, 56, 64, 96, 128, 256 kbpsfs 16, 22.05, 24, 32, 44.1, 48 kHzWMA32 to 192 kbps, Mono, StereoFull Decoding of Dolby Digital and DTS Multi-channel SoundDolby Surround Compatible Downmix from Dolby Digital Multi-chan-nel SoundDolby Pro Logic IIMAIN UNIT (DVR-S300)Power Supply- C model120 V, 60 Hz- K model220 V, 60 Hz- A model240 V, 50 Hz- B, G models230 V, 50 Hz- L model220 - 240 V, 50/60 Hz- V model110 - 120 V, 50/60 Hz- J model100 V, 50/60 HzPower Consumption15WFrequency Response20 Hz to 20 kHz/-3 dBSignal-to-Noise Ratio 95 dBInput Sensitivity- AUX In, TV In300 mV- SCART In500 mV (B, G models)Dimensions (W x H x D)360 x 53 x 310 mm(14-3/16 x 2-1/16 x 12-3/16)Weight2.7 kg (5 lbs. 15 oz.)FinishSilver ColorSUBWOOFER (NX-SW301)Power Supply- C model120 V, 60 Hz- K model220 V, 60 Hz- A model240 V, 50 Hz- B, G models230 V, 50 Hz- L model220 - 240 V, 50/60 Hz- V model110 - 120 V, 50/60 Hz- J model100 V, 50/60 HzPower Consumption- C, K, A, B, G, L, V models200 W- J model145 WSystemBass Reflex SystemImpedance6 ohmsDriver16 cm (6-5/16”) WooferFrequency Response40 Hz to 100 HzDimensions (W x H x D)200 x 390 x 382 mm(7-7/8 x 15-3/8 x 15-1/16)Weight11.5 kg (25 lbs. 5 oz.)FinishSilver ColorFRONT AND SURROUND SPEAKERNX-S301System2-way SystemImpedance6 ohmsDrivers7.0 cm (2-3/4”) Woofer x 11.9 cm (3/4”) Tweeter x 1Frequency Response100 Hz to 20 kHzDimensions (W x H x D)83 x 181 x 78 mm(3-1/4 x 7-1/8 x 3-1/16)Weight0.6 kg (1 lbs. 5 oz.)FinishSilver ColorNX-S302SystemFull Range SystemImpedance6 ohmsDrivers5.0 cm (2”) Full Range x 32.5 cm (1”) Piezo Tweeter x 1Frequency Response100 Hz to 20 kHzDimensions (W x H x D)210 x 994 x 210 mm(8-1/4 x 39-1/8 x 8-1/4)with StandWeight3.0 kg (6 lbs. 9 oz.)FinishSilver ColorCENTER SPEAKERNX-C301System2-way SystemImpedance6 ohmsDrivers7.0 cm (2-3/4”) Woofer x 21.9 cm (3/4”) Tweeter x 1Frequency Response100 Hz to 20 kHzDimensions (W x H x D)300 x 84 x 78 mm(11-13/16 x 3-5/16 x 3-1/16)Weight1.0 kg (2 lbs. 3 oz.)FinishSilver ColorNX-C302SystemFull Range SystemImpedance6 ohmsDrivers5.0 cm (2”) Full Range x 3Frequency Response100 Hz to 20 kHzDimensions (W x H x D)328 x 98 x 64 mm(12-15/16 x 3-7/8 x 2-1/2)Weight0.7 kg (1 lbs. 8 oz.)FinishSilver ColorI SPECIFICATIONS / 参考仕様DVR-S300/NX-P301/NX-P30214DVR-S300NX-P301/NX-P302ACCESSORIESDVR-S300Remote Control x 1Indoor FM Antenna x 1AM Loop Antenna x 1System Control Cable (4m) x 1Video Pin Cable (1.5m) x 1NX-P301Speaker Cable Kit (15m) x 2Speaker Cable Kit (5m) x 3Fastener x 2 (for NX-C301)Nonskid Pad x 4 (for NX-SW301)NX-P302Base x 4 (fo
